Difference between revisions of "PostgreSQL"

From ArchWiki
Jump to navigation Jump to search
(listen_addresses is to specify which local address(es) to listen on, not remote address(es).)
Line 108: Line 108:
Edit the file {{ic|/var/lib/postgres/data/postgresql.conf}}. In the connections and authentications section, add the {{ic|listen_addresses}} line to your needs:
Edit the file {{ic|/var/lib/postgres/data/postgresql.conf}}. In the connections and authentications section, add the {{ic|listen_addresses}} line to your needs:
  listen_addresses = 'localhost,my_local_ip_address'
  listen_addresses = 'localhost,''my_local_ip_address'''
  #You can use '*' to listen on all local addresses
  #You can use '*' to listen on all local addresses
Take a careful look at the other lines.
Take a careful look at the other lines.

Revision as of 16:33, 14 September 2016


PostgreSQL is an open source, community driven, standard compliant object-relational database system.

This document describes how to set up PostgreSQL. It also describes how to configure PostgreSQL to be accessible from a remote client. Among other applications, PostgreSQL can be substituted for MySQL as part of the LAMP web stack.

Installing PostgreSQL

Install the postgresql package. Then set a password for the newly created postgres user.

Then, switch to the default PostgreSQL user postgres by executing the following command:

  • If you have sudo and your username is in sudoers:
$ sudo -i -u postgres
  • Otherwise:
$ su
# su - postgres
Note: Commands that should be run as the postgres user are prefixed by [postgres]$ in this article.

Before PostgreSQL can function correctly, the database cluster must be initialized:

[postgres]$ initdb --locale $LANG -E UTF8 -D '/var/lib/postgres/data'


  • the --locale is the one defined in the file /etc/locale.conf;
  • the -E is the default encoding of the database that will be created in the future;
  • and -D is the default location where the database cluster must be stored.

A bunch of lines should now appear on the screen with several ending by ... ok:

The files belonging to this database system will be owned by user "postgres".
This user must also own the server process.

The database cluster will be initialized with locale "en_GB.UTF-8".
The default text search configuration will be set to "english".

Data page checksums are disabled.

fixing permissions on existing directory /var/lib/postgres/data ... ok
creating subdirectories ... ok
selecting default max_connections ... 100
selecting default shared_buffers ... 128MB
selecting dynamic shared memory implementation ... posix
creating configuration files ... ok
creating template1 database in /var/lib/postgres/data/base/1 ... ok
initializing pg_authid ... ok

If this is the kind of lines you see, then the process succeeded. In that case return to the regular user using exit.

Then as root, start and enable postgresql.service.

Warning: If the database resides on a Btrfs file system, you should consider disabling Copy-on-Write for the directory before creating any database. If the database resides on a ZFS file system, you should consult ZFS#Database before creating any database.

Create your first database/user

Tip: If you create a PostgreSQL user with the same name as your Linux username, it allows you to access the PostgreSQL database shell without having to specify a user to login (which makes it quite convenient).

Become the postgres user. Add a new database user using the createuser command:

[postgres]$ createuser --interactive

Create a new database over which the above user has read/write privileges using the createdb command (execute this command from your login shell if the database user has the same name as your Linux user, otherwise add -U database-username to the following command):

$ createdb myDatabaseName

Familiarize with PostgreSQL

Access the database shell

Become the postgres user. Start the primary database shell, psql, where you can do all your creation of databases/tables, deletion, set permissions, and run raw SQL commands. Use the -d option to connect to the database you created (without specifying a database, psql will try to access a database that matches your username).

[postgres]$ psql -d myDatabaseName

Some helpful commands:

Get help:

=> \help

Connect to a particular database:

=> \c <database>

List all users and their permission levels:

=> \du

Show summary information about all tables in the current database:

=> \dt

Exit/quit the psql shell:

=> \q or CTRL+d

There are of course many more meta-commands, but these should help you get started. To see all meta-commands run:

=> \?

Optional configuration

Configure PostgreSQL to be accessible from remote hosts

The PostgreSQL database server configuration file is postgresql.conf. This file is located in the data directory of the server, typically /var/lib/postgres/data. This folder also houses the other main configuration files, including the pg_hba.conf.

Note: By default, this folder will not be browsable or searchable by a regular user. This is why find and locate are not finding the configuration files.

Edit the file /var/lib/postgres/data/postgresql.conf. In the connections and authentications section, add the listen_addresses line to your needs:

listen_addresses = 'localhost,my_local_ip_address'
#You can use '*' to listen on all local addresses

Take a careful look at the other lines.

Host-based authentication is configured in /var/lib/postgres/data/pg_hba.conf. This file controls which hosts are allowed to connect. Note that the defaults allow any local user to connect as any database user, including the database superuser. Add a line like the following:

# IPv4 local connections:
host   all   all   my_remote_client_ip_address/32   md5

where my_remote_client_ip_address is the IP address of the client.

See the documentation for pg_hba.conf.

After this you should restart postgresql.service for the changes to take effect.

Note: PostgreSQL uses port 5432 by default for remote connections. Make sure this port is open and able to receive incoming connections.

For troubleshooting take a look in the server log file:

$ journalctl -u postgresql

Configure PostgreSQL authenticate against PAM

PostgreSQL offers a number of authentication methods. If you would like to allow users to authenticate with their system password, additional steps are necessary. First you need to enable PAM for the connection.

For example, the same configuration as above, but with PAM enabled:

# IPv4 local connections:
host   all   all   my_remote_client_ip_address/32   pam

The PostgreSQL server is however running without root privileges and will not be able to access /etc/shadow. We can work around that by allowing the postgres group to access this file:

setfacl -m g:postgres:r /etc/shadow

Change default data directory

The default directory where all your newly created databases will be stored is /var/lib/postgres/data. To change this, follow these steps:

Create the new directory and make the postgres user its owner:

# mkdir -p /pathto/pgroot/data
# chown -R postgres:postgres /pathto/pgroot

Become the postgres user, and initialize the new cluster:

[postgres]$ initdb -D /pathto/pgroot/data

Some variables need to be overridden in the configuration, as described in Systemd#Editing provided units. First, run:

# systemctl edit postgresql.service

Systemctl will open a drop-in configuration file in your editor. Write the following in that file:


If you want to use /home directory for default directory or for tablespaces, add one more line in this file:


Change default encoding of new databases to UTF-8

Note: If you ran initdb with -E UTF8 these steps are not required.

When creating a new database (e.g. with createdb blog) PostgreSQL actually copies a template database. There are two predefined templates: template0 is vanilla, while template1 is meant as an on-site template changeable by the administrator and is used by default. In order to change the encoding of a new database, one of the options is to change on-site template1. To do this, log into PostgreSQL shell (psql) and execute the following:

First, we need to drop template1. Templates cannot be dropped, so we first modify it so it is an ordinary database:

UPDATE pg_database SET datistemplate = FALSE WHERE datname = 'template1';

Now we can drop it:

DROP DATABASE template1;

The next step is to create a new database from template0, with a new default encoding:


Now modify template1 so it is actually a template:

UPDATE pg_database SET datistemplate = TRUE WHERE datname = 'template1';

Optionally, if you do not want anyone connecting to this template, set datallowconn to FALSE:

UPDATE pg_database SET datallowconn = FALSE WHERE datname = 'template1';
Note: This last step can create problems when upgrading via pg_upgrade.

Now you can create a new database:

[postgres]$ createdb blog

If you log back in to psql and check the databases, you should see the proper encoding of your new database:



                              List of databases
  Name    |  Owner   | Encoding  | Collation | Ctype |   Access privileges
blog      | postgres | UTF8      | C         | C     |
postgres  | postgres | SQL_ASCII | C         | C     |
template0 | postgres | SQL_ASCII | C         | C     | =c/postgres
                                                     : postgres=CTc/postgres
template1 | postgres | UTF8      | C         | C     |

Administration tools

  • phpPgAdmin — Web-based administration tool for PostgreSQL.
http://phppgadmin.sourceforge.net || phppgadmin
  • pgAdmin — GUI-based administration tool for PostgreSQL.
http://www.pgadmin.org/ || pgadmin3

Setup HHVM to work with PostgreSQL

Tango-view-refresh-red.pngThis article or section is out of date.Tango-view-refresh-red.png

Reason: hhvm-pgsql fails to compile against HHVM 3.7.0, but upstream has not resolved the problem yet. See https://github.com/PocketRent/hhvm-pgsql/issues/82 (Discuss in Talk:PostgreSQL#Setting up HHVM)
$ git clone https://github.com/PocketRent/hhvm-pgsql.git
$ cd hhvm-pgsql

If you do not use a nightly build, then run this command (verified on HHVM 3.6.1) to avoid compile errors:

$ git checkout tags/3.6.0

Then build the extension (if you do not need an improved support for Hack language, then remove -DHACK_FRIENDLY=ON):

$ hphpize
$ make

Then copy the built extension:

# cp pgsql.so /etc/hhvm/

Add to /etc/hhvm/server.ini:

extension_dir = /etc/hhvm
hhvm.extensions[pgsql] = pgsql.so

Upgrading PostgreSQL

Upgrading minor PostgreSQL versions (i.e. 9.2, 9.3, 9.4, 9.5) requires some extra maintenance.

Tip: If you already migrated from 9.2 to 9.3 and you want to migrate from 9.3 to 9.4, change versions before executing commands. If /var/lib/postgres/data-9.2 already exists and you just copy-paste all commands, pg_upgrade will complain about the wrong version of the database, because your version 9.3 database will be stored in /var/lib/postgres/data-9.2/data/.

Quick guide

If you had custom settings in configuration files like pg_hba.conf and postgresql.conf, merge them into the new ones.

## Set the old version that we want to upgrade from.
export FROM_VERSION=9.4

pacman -S --needed postgresql-old-upgrade
chown postgres:postgres /var/lib/postgres/
su - postgres -c "mv /var/lib/postgres/data /var/lib/postgres/data-${FROM_VERSION}"
su - postgres -c 'mkdir /var/lib/postgres/data'
su - postgres -c "initdb --locale $LANG -E UTF8 -D /var/lib/postgres/data"
su - postgres -c "pg_upgrade -b /opt/pgsql-${FROM_VERSION}/bin/ -B /usr/bin/ -d /var/lib/postgres/data-${FROM_VERSION} -D /var/lib/postgres/data"


If the pg_upgrade step fails with the following messages,

cannot write to log file pg_upgrade_internal.log
Failure, exiting
Make sure you are in a directory that the postgres user has enough rights to write the log file to (/tmp for example), or use su - postgres instead of sudo -u postgres.
If you are in a directory that postgres user has enough rights to write the log file to however you still get this error then make sure /var/lib/postgres is owned by postgres
LC_COLLATE error that says that old and new values are different
Figure out what the old locale was, C or en_US.UTF-8 for example, and force it when calling initdb.
sudo -u postgres LC_ALL=C initdb -D /var/lib/postgres/data
There seems to be a postmaster servicing the old cluster.
Please shutdown that postmaster and try again.
Make sure postgres is not running. If you still get the error, then chances are there is an old PID file you need to clear out.
Find the old pid in old pg data,
  $ sudo -u postgres ls -l /var/lib/postgres/data-9.X
  total 88
  -rw------- 1 postgres postgres     4 Mar 25  2012 PG_VERSION
  drwx------ 8 postgres postgres  4096 Jul 17 00:36 base
  drwx------ 2 postgres postgres  4096 Jul 17 00:38 global
  drwx------ 2 postgres postgres  4096 Mar 25  2012 pg_clog
  -rw------- 1 postgres postgres  4476 Mar 25  2012 pg_hba.conf
  -rw------- 1 postgres postgres  1636 Mar 25  2012 pg_ident.conf
  drwx------ 4 postgres postgres  4096 Mar 25  2012 pg_multixact
  drwx------ 2 postgres postgres  4096 Jul 17 00:05 pg_notify
  drwx------ 2 postgres postgres  4096 Mar 25  2012 pg_serial
  drwx------ 2 postgres postgres  4096 Jul 17 00:53 pg_stat_tmp
  drwx------ 2 postgres postgres  4096 Mar 25  2012 pg_subtrans
  drwx------ 2 postgres postgres  4096 Mar 25  2012 pg_tblspc
  drwx------ 2 postgres postgres  4096 Mar 25  2012 pg_twophase
  drwx------ 3 postgres postgres  4096 Mar 25  2012 pg_xlog
  -rw------- 1 postgres postgres 19169 Mar 25  2012 postgresql.conf
  -rw------- 1 postgres postgres    48 Jul 17 00:05 postmaster.opts
  -rw------- 1 postgres postgres    80 Jul 17 00:05 postmaster.pid   # <-- This is the problem
Move the old pid to temporary directory,
$ sudo -u postgres mv /var/lib/postgres/data-9.X/postmaster.pid /tmp
ERROR: could not access file "$libdir/postgis-2.0": No such file or directory
Retrieve postgis-2.0.so from postgis for version postgresql 9.X () and copy it to /opt/pgsql-9.X/lib and make sure the privileges are readable by postgres user.

Your installation references loadable libraries that are missing from the new installation.
You can add these libraries to the new installation, or remove the functions using them from the old installation.
A list of problem libraries is in the file
Could not load library "$libdir/pg_upgrade_support"
ERROR: could not access file "$libdir/pg_upgrade_support": No such file or directory
It means you have leftovers from old failed pg_upgrade attempts that you never completed. So you'll need to start postgres with old data and
in each database execute DROP SCHEMA IF EXISTS binary_upgrade CASCADE;

Detailed instructions

Note: Official PostgreSQL upgrade documentation should be followed.
Warning: The following instructions could cause data loss. Use at your own risk.

It is recommended to add the following to your /etc/pacman.conf file:

IgnorePkg = postgresql postgresql-libs

This will ensure you do not accidentally upgrade the database to an incompatible version. When an upgrade is available, pacman will notify you that it is skipping the upgrade because of the entry in pacman.conf. Minor version upgrades (e.g. 9.0.3 to 9.0.4) are safe to perform. However, if you do an accidental upgrade to a different major version (e.g. 9.0.x to 9.1.x), you might not be able to access any of your data. Always check the PostgreSQL home page (http://www.postgresql.org/) to be sure of what steps are required for each upgrade. For a bit about why this is the case, see the versioning policy.

There are two main ways to upgrade your PostgreSQL database. Read the official documentation for details.

For those wishing to use pg_upgrade, a postgresql-old-upgrade package is available in the official repositories that will always run one major version behind the real PostgreSQL package. This can be installed side-by-side with the new version of PostgreSQL.

When you are ready, upgrade the following packages: postgresql, postgresql-libs, and postgresql-old-upgrade. Note that the data directory does not change from version to version, so before running pg_upgrade, it is necessary to rename your existing data directory and migrate into a new directory. The new database must be initialized, as described near the top of this page.

# systemctl stop postgresql
# su - postgres -c 'mv /var/lib/postgres/data /var/lib/postgres/olddata'
# su - postgres -c 'initdb --locale en_US.UTF-8 -E UTF8 -D /var/lib/postgres/data'

The upgrade invocation will likely look something like the following. Do not run this command blindly without understanding what it does! Reference the upstream pg_upgrade documentation for details.

# su - postgres -c 'pg_upgrade -d /var/lib/postgres/olddata/ -D /var/lib/postgres/data/ -b /opt/pgsql-9.4/bin/ -B /usr/bin/'

Manual dump and reload

You could also do something like this (after the upgrade and install of postgresql-old-upgrade).

Note: Below are the commands for PostgreSQL 9.4. You can find similar commands in /opt/ for PostgreSQL 9.2.
# systemctl stop postgresql
# /opt/pgsql-9.4/bin/pg_ctl -D /var/lib/postgres/olddata/ start
# /opt/pgsql-9.4/bin/pg_dumpall >> old_backup.sql
# /opt/pgsql-9.4/bin/pg_ctl -D /var/lib/postgres/olddata/ stop
# systemctl start postgresql
# psql -f old_backup.sql postgres


Improve performance of small transactions

If you are using PostgresSQL on a local machine for development and it seems slow, you could try turning synchronous_commit off in the configuration. Beware of the caveats, however.

synchronous_commit = off

Prevent disk writes when idle

PostgreSQL periodically updates its internal "statistics" file. By default, this file is stored on disk, which prevents disks from spinning down on laptops and causes hard drive seek noise. It is simple and safe to relocate this file to a memory-only file system with the following configuration option:

stats_temp_directory = '/run/postgresql'

Cannot connect to database through pg_connect()

Install php-pgsql and edit the php.ini file uncommenting the lines extension=pdo_pgsql.so and extension=pgsql.so, then restart httpd.