PostgreSQL is an open source, community driven, standard compliant object-relational database system.
This document describes how to set up PostgreSQL. It also describes how to configure PostgreSQL to be accessible from a remote client. If you need help setting up the rest of a web stack, see the LAMP page and follow all of the sections except the one related to MySQL.
- 1 Before you start
- 2 Installing PostgreSQL
- 3 Creating Your First Database/User
- 4 Familiarizing Yourself with PostgreSQL
- 5 Configure PostgreSQL to be accessible from remote hosts
- 6 Configure PostgreSQL to Work With PHP
- 7 Change Default Data Dir (Optional)
- 8 Change Default Encoding of New Databases To UTF-8 (Optional)
- 9 Installing phpPgAdmin (optional)
- 10 Installing pgAdmin (optional)
- 11 Upgrading PostgreSQL
- 12 Troubleshooting
- 13 See also
Before you start
Several sections have instructions stating "become the postgres user". If sudo is installed, execute the following to get a shell as the postgres user:
sudo -i -u postgres
Otherwise su can be used:
su root su - postgres
Create the file tmpfiles.d for /run/postgresql:
# systemd-tmpfiles --create postgresql.conf
Create the data directory (acordingly with the PGROOT variable set before in the config file)
# mkdir /var/lib/postgres/data
Set /var/lib/postgres/data ownership to user 'postgres'
# chown -c postgres:postgres /var/lib/postgres/data
As user 'postgres' start the database (see first paragraph of this document for instructions on how to become a postgres user):
$ initdb -D '/var/lib/postgres/data'
# systemctl start postgresql
(Optional) Add PostgreSQL to the list of daemons that start on system startup
# systemctl enable postgresql
Creating Your First Database/User
Become the postgres user. Add a new database-user using the createuser command.
If you create a user as per your login user ($USER) it allows you to access the postgresql database shell without having to specify a user to login (which makes it quite convenient).
e.g. to create a superuser
$ createuser -s -U postgres --interactive
Enter name of role to add: myUsualArchLoginName
Create a new database over which the above user has read/write privileges using the createdb command.
From your login shell (not the postrgres user's)
$ createdb myDatabaseName
Familiarizing Yourself with PostgreSQL
Access the database shell
Become the postgres user. Start the primary db shell, psql, where you can do all your creation of databases/tables, deletion, set permissions, and run raw SQL commands. Use the "-d" option to connect to the database you created (without specifying a database, psql will try to access a database that matches your username)
$ psql -d myDatabaseName
Some helpful commands:
Connect to a particular database
=> \c <database>
List all users and their permission levels
Shows summary information about all tables in the current database
exit/quit the psql shell
=> \q or CTRL+d
There are of course many more meta-commands, but these should help you get started.
Configure PostgreSQL to be accessible from remote hosts
The PostgreSQL database server configuration file is
postgresql.conf. This file is located in the data directory of the server, typically
/var/lib/postgres/data. This folder also houses the other main config files, including the
# vim /var/lib/postgres/data/postgresql.confIn the connections and authentications section uncomment or edit the
listen_addressesline to your needs
listen_addresses = '*'and take a careful look at the other lines.
Hereafter insert the following line in the host-based authentication file
/var/lib/postgres/data/pg_hba.conf. This file controls which hosts are allowed to connect, so be careful.
# IPv4 local connections: host all all your_desired_ip_address/32 trust
your_desired_ip_address is the IP address of the client.
# systemctl restart postgresql
For troubleshooting take a look in the server log file
Configure PostgreSQL to Work With PHPInstall the PHP-PostgreSQL modules
# pacman -S php-pgsqlOpen the file
/etc/php/php.iniwith your editor of choice, e.g.,
# vim /etc/php/php.ini
Find the line that starts with, ";extension=pgsql.so" and change it to, "extension=pgsql.so". (Just remove the preceding ";"). If you need PDO, do the same thing with ";extension=pdo.so" and ";extension=pdo_pgsql.so". If these lines are not present, add them. These lines may be in the "Dynamic Extensions" section of the file, or toward the very end of the file.Restart the Apache web server
# systemctl restart httpd
Change Default Data Dir (Optional)
The default directory where all your newly created databases will be stored is
/var/lib/postgres/data. To change this, follow these steps:
Create the new directory and assign it to user
postgres (you eventually have to become root):
mkdir -p /pathto/pgroot/data chown -R postgres:postgres /pathto/pgroot
Become the postgres user(change to root, then postgres user), and initialize the new cluster:
initdb -D /pathto/pgroot/data
/etc/conf.d/postgresql and change the PGROOT variable(optionally PGLOG) to point to your new pgroot directory.
If using systemd, copy
/etc/systemd/system/postgresql.service and change the default PGROOT path.
You will also need to change the default PIDFile path.
Change Default Encoding of New Databases To UTF-8 (Optional)
When creating a new database (e.g. with
createdb blog) PostgreSQL actually copies a template database. There are two predefined templates: template0 is vanilla, while template1 is meant as an on-site template changeable by the administrator and is used by default. In order to change the encoding of new database, one of the options is to change on-site template1. To do this, log into PostgresSQL shell (psql) and execute the following:
First, we need to drop template1. Templates cannot be dropped, so we first modify it so it is an ordinary database:
UPDATE pg_database SET datistemplate = FALSE WHERE datname = 'template1';
Now we can drop it:
DROP DATABASE template1;
The next step is to create a new database from template0, with a new default encoding:
CREATE DATABASE template1 WITH TEMPLATE = template0 ENCODING = 'UNICODE';
Now modify template1 so it is actually a template:
UPDATE pg_database SET datistemplate = TRUE WHERE datname = 'template1';
(OPTIONAL) If you do not want anyone connecting to this template, set datallowconn to FALSE:
UPDATE pg_database SET datallowconn = FALSE WHERE datname = 'template1';
(this last step can create problems when upgrading via
Now you can create a new database by running from regular shell:
su - su - postgres createdb blog;
If you log in back to psql and check the databases, you should see the proper encoding of your new database:
List of databases Name | Owner | Encoding | Collation | Ctype | Access privileges -----------+----------+-----------+-----------+-------+---------------------- blog | postgres | UTF8 | C | C | postgres | postgres | SQL_ASCII | C | C | template0 | postgres | SQL_ASCII | C | C | =c/postgres : postgres=CTc/postgres template1 | postgres | UTF8 | C | C |
Installing phpPgAdmin (optional)
- Make sure that the [community] repo is enabled.
- Install the package via Pacman
# pacman -S phppgadmin
Installing pgAdmin (optional)
pgAdmin is a GUI-based administration tool for PostgreSQL.
- Install the package via Pacman
# pacman -S pgadmin3
This is for upgrading from 9.1 to 9.2.
pacman -S --needed postgresql-old-upgrade su - postgres -c 'mv /var/lib/postgres/data /var/lib/postgres/data-9.1' su - postgres -c 'mkdir /var/lib/postgres/data' su - postgres -c 'initdb -D /var/lib/postgres/data'
If you had custom settings in configuration files like pg_hba.conf and postgresql.conf, merge them into the new ones. Then:
su - postgres -c 'pg_upgrade -b /opt/pgsql-9.1/bin/ -B /usr/bin/ -d /var/lib/postgres/data-9.1 -D /var/lib/postgres/data'
If the "pg_upgrade" step fails with:
- cannot write to log file pg_upgrade_internal.log
Make sure you're in a directory that the "postgres" user has enough rights to write the log file to (
/tmpfor example). Or use "su - postgres" instead of "sudo -u postgres".
- LC_COLLATE error that says that old and new values are different
Figure out what the old locale was, C or en_US.UTF-8 for example, and force it when calling initdb.
sudo -u postgres LC_ALL=C initdb -D /var/lib/postgres/data
- There seems to be a postmaster servicing the old cluster.
Please shutdown that postmaster and try again.
Make sure postgres isn't running. If you still get the error then chances are these an old PID file you need to clear out.
> sudo -u postgres ls -l /var/lib/postgres/data-9.1 total 88 -rw------- 1 postgres postgres 4 Mar 25 2012 PG_VERSION drwx------ 8 postgres postgres 4096 Jul 17 00:36 base drwx------ 2 postgres postgres 4096 Jul 17 00:38 global drwx------ 2 postgres postgres 4096 Mar 25 2012 pg_clog -rw------- 1 postgres postgres 4476 Mar 25 2012 pg_hba.conf -rw------- 1 postgres postgres 1636 Mar 25 2012 pg_ident.conf drwx------ 4 postgres postgres 4096 Mar 25 2012 pg_multixact drwx------ 2 postgres postgres 4096 Jul 17 00:05 pg_notify drwx------ 2 postgres postgres 4096 Mar 25 2012 pg_serial drwx------ 2 postgres postgres 4096 Jul 17 00:53 pg_stat_tmp drwx------ 2 postgres postgres 4096 Mar 25 2012 pg_subtrans drwx------ 2 postgres postgres 4096 Mar 25 2012 pg_tblspc drwx------ 2 postgres postgres 4096 Mar 25 2012 pg_twophase drwx------ 3 postgres postgres 4096 Mar 25 2012 pg_xlog -rw------- 1 postgres postgres 19169 Mar 25 2012 postgresql.conf -rw------- 1 postgres postgres 48 Jul 17 00:05 postmaster.opts -rw------- 1 postgres postgres 80 Jul 17 00:05 postmaster.pid # <-- This is the problem > sudo -u postgres mv /var/lib/postgres/data-9.1/postmaster.pid /tmp
- ERROR: could not access file "$libdir/postgis-2.0": No such file or directory
Retrieve postgis-2.0.so from postgis package for version postgresql 9.1 () and copy it to /opt/pgsql-9.1/lib (make sure the privileges are right)
Note that these instructions could cause data loss. Use at your own risk.
It is recommended to add the following to your
IgnorePkg = postgresql postgresql-libs
This will ensure you do not accidentally upgrade the database to an incompatible version. When an upgrade is available, pacman will notify you that it is skipping the upgrade because of the entry in pacman.conf. Minor version upgrades (e.g., 9.0.3 to 9.0.4) are safe to perform. However, if you do an accidental upgrade to a different major version (e.g., 9.0.X to 9.1.X), you might not be able to access any of your data. Always check the PostgreSQL home page (http://www.postgresql.org/) to be sure of what steps are required for each upgrade. For a bit about why this is the case see the versioning policy.
There are two main ways to upgrade your PostgreSQL database. Read the official documentation for details.
For those wishing to use
pg_upgrade, a package is available in the repositories that will always run one major version behind the real PostgreSQL package. This can be installed side by side with the new version of PostgreSQL. When you are ready to perform the upgrade, you can do
pacman -Syu postgresql postgresql-libs postgresql-old-upgrade
Note also that the data directory does not change from version to version, so before running pg_upgrade it is necessary to rename your existing data directory and migrate into a new directory. The new database must be initialized by starting the server, as described near the top of this page. The server then needs to be stopped before running pg_upgrade.
# rc.d stop postgresql # su - postgres -c 'mv /var/lib/postgres/data /var/lib/postgres/olddata' # rc.d start postgresql # rc.d stop postgresql
Reference the upstream pg_upgrade documentation for details.
The upgrade invocation will likely look something like the following (run as the postgres user). Do not run this command blindly without understanding what it does!
# su - postgres -c 'pg_upgrade -d /var/lib/postgres/olddata/ -D /var/lib/postgres/data/ -b /opt/pgsql-8.4/bin/ -B /usr/bin/'
You could also do something like this (after the upgrade and install of postgresql-old-upgrade)
# rc.d stop postgresql # /opt/pgsql-8.4/bin/pg_ctl -D /var/lib/postgres/olddata/ start # pg_dumpall >> old_backup.sql # /opt/pgsql-8.4/bin/pg_ctl -D /var/lib/postgres/olddata/ stop # rc.d start postgresql # psql -f old_backup.sql postgres
Improve performance of small transactions
If you are using PostgresSQL on a local machine for development and it seems slow, you could try turning synchronous_commit off in the configuration (
/var/lib/postgres/data/postgresql.conf). Beware of the caveats, however.
synchronous_commit = off
Prevent disk writes when idle
PostgreSQL periodically updates its internal "statistics" file. By default, this file is stored on disk, which prevents disks spinning down on laptops and causes hard drive seek noise. It's simple and safe to relocate this file to a memory-only file system with the following configuration option:
stats_temp_directory = '/run/postgresql'