From ArchWiki
Revision as of 05:10, 8 March 2012 by Filam (Talk | contribs) (Additional Resources: Linux Magazine links)

Jump to: navigation, search

This template has only maintenance purposes. For linking to local translations please use interlanguage links, see Help:i18n#Interlanguage links.

Local languages: Català – Dansk – English – Español – Esperanto – Hrvatski – Indonesia – Italiano – Lietuviškai – Magyar – Nederlands – Norsk Bokmål – Polski – Português – Slovenský – Česky – Ελληνικά – Български – Русский – Српски – Українська – עברית – العربية – ไทย – 日本語 – 正體中文 – 简体中文 – 한국어

External languages (all articles in these languages should be moved to the external wiki): Deutsch – Français – Română – Suomi – Svenska – Tiếng Việt – Türkçe – فارسی

Template:Article summary start Template:Article summary text Template:Article summary heading Template:Article summary link Template:Article summary link Template:Article summary heading Template:Article summary wiki Template:Article summary wiki Template:Article summary wiki Template:Article summary end


Template:Wikipedia Redundant Array of Independent Disks (RAID) devices are virtual devices created from two or more real block devices. This allows multiple devices (typically disk drives or partitions thereof) to be combined into a single device to hold (for example) a single filesystem. RAID is designed to prevent data loss in the event of a hard disk failure. There are different levels of RAID.

Uses striping to combine disks. Not really RAID in that it provides no redundancy. It does, however, provide a big speed benefit. This example will utilize RAID 0 for swap, on the assumption that a desktop system is being used, where the speed increase is worth the possibility of system crash if one of your drives fails. On a server, a RAID 1 or RAID 5 array is more appropriate. The size of a RAID 0 array block device is the size of the smallest component partition times the number of component partitions.
The most straightforward RAID level: straight mirroring. As with other RAID levels, it only makes sense if the partitions are on different physical disk drives. If one of those drives fails, the block device provided by the RAID array will continue to function as normal. The example will be using RAID 1 for everything except swap. Note that RAID 1 is the only option for the boot partition, because bootloaders (which read the boot partition) do not understand RAID, but a RAID 1 component partition can be read as a normal partition. The size of a RAID 1 array block device is the size of the smallest component partition.
Requires 3 or more physical drives, and provides the redundancy of RAID 1 combined with the speed and size benefits of RAID 0. RAID 5 uses striping, like RAID 0, but also stores parity blocks distributed across each member disk. In the event of a failed disk, these parity blocks are used to reconstruct the data on a replacement disk. RAID 5 can withstand the loss of one member disk.
Note: RAID 5 is a common choice due to its combination of speed and data redundancy. The caveat is that if 1 drive were to fail and before that drive was replaced another drive failed, all data will be lost. For excellent information regarding this, see the RAID5 Risks discussion thread on the Ubuntu forums. The best alternative to RAID5 when redundancy is crucial is RAID 10.
RAID 1+0
Commonly referred to as RAID 10, is a nested RAID that combines two of the standard levels of RAID to gain performance and additional redundancy.


Warning: Installing a system with RAID is a complex process that may destroy data. Be sure to backup all data before proceeding.

RAID does not provide a guarantee that your data is safe. If there is a fire, if your computer is stolen or if you have multiple hard drive failures, RAID will not protect your data. Therefore it is important to make backups (see Backup Programs). Whether you use tape drives, DVDs, CDROMs or another computer, keep an current copy of your data out of your computer (and preferably offsite). Get into the habit of making regular backups. You can also divide the data on your computer into current and archived directories. Then back up the current data frequently, and the archived data occasionally.

RAID Levels

RAID level Data redundancy Physical drive utilization Read performance Write performance Min drives Max drives
0 No 100% Superior Superior 1 16
1 Yes 50% Very high Very high 2 2
5 Yes 67% - 94% Superior High 3 16
6 Yes 50% - 88% Very High High 4 16
10 Yes 50% Very high Very high 4 16


Install mdadm and parted, available in the Official Repositories.

Prepare the device

To prevent possible issues down the line, you should consider wiping your entire disk before setting up RAID. This should be repeated for each disk you will be using for RAID, these commands completely erase anything currently on the device!

Warning: These steps erase everything on the /dev/disk-to-clean so type carefully

Erase any old RAID configuration info

# mdadm --zero-superblock /dev/disk-to-clean

Erase all partition-table data

# dd if=/dev/zero of=/dev/disk-to-clean bs=4096 count=1

Make sure kernel clears old entries

# partprobe -s

Verify the entries in /etc/fstab and /etc/mdadm.conf

With a software RAID, disabling the hard disk cache will help prevent data loss during power loss, as long as you do not use a UPS. Repeat the command for each drive in the array. Note however, that this decreases performance.

# hdparm -W 0 /dev/path_to_disk

Create the partition table

The RAID setup varies between different RAID-levels. If you know what RAID you want and already set up your hardware accordingly, you can proceed with formatting the disks you want in your array. It is also possible to create a RAID-array directly on the raw disks (without partitions), but not recommended because it can cause problems when swapping a failed disk.

When replacing a failed disk of a RAID-array, the new disk has to be exactly the same size as the failed disk or bigger — otherwise the array recreation process will not work. Even hard drives of the same manufacturer and model can have small size differences. By leaving a little space at the end of the disk unallocated one can compensate for the size differences between drives, which makes choosing a replacement drive model easier. Therefore, it is good practice to leave about 100 MB of unallocated space at the end of the disk.

Format one of the drives in the array with your favorite tool. For example,

# cfdisk /dev/path_to_disk
Tip: Using GParted to create the partitions and align them to the cylinder will create optimized disk alignment. This can be achieved using the Gnome Partition Editor Live Media.

Partition code

The two partition types that are applicable to RAID devices are Non-FS data and Linux RAID auto. Non-FS data is recommended, as your array is not auto-assembled during boot. With Linux RAID auto one may run into trouble when booting from a live-cd or when installing the degraded RAID-array in a different system (maybe with other degraded RAID-arrays in worst case) as Linux will try to automatically assemble and resync the array which could render your data on the array unreadable if it fails.

Note: cfdisk and mkpart use a set of "filesystem types" to set the partition codes. Each type corresponds to a partition code (see Parted User's Manual). It uses the da type to denote Non-FS data and fd for Linux RAID auto.

Copy the partition table

Once you have a properly partitioned and aligned disk you can copy the setup to any other disk.

Verify your partitions meet basic requirements:

# sfdisk -lRV /dev/path_to_formatted_array_disk

Dump the partition table from the formatted disk to a file:

# sfdisk -d /dev/path_to_formatted_array_disk > ~/formatted_array.dump

Copy the partition table from the disk dump file to all other disks in the array:

# sfdisk /dev/path_to_unformatted_array_disk < ~/formatted_array.dump

After repeating the command for every unformatted disk of the array, verify that the disks are identical with

# fdisk -l


# sfdisk -l -u S

Build the array

Now build the array (e.g. post on RAID5 setup).

Warning: Make sure to change the bold values below to match your setup.
 # mdadm --create --verbose /dev/your_array --level=5 --metadata=1.2 --chunk=256 --raid-devices=5 /dev/path_to_array_disk-1 /dev/path_to_array_disk-2 /dev/path_to_array_disk-3 /dev/path_to_array_disk-4 /dev/path_to_array_disk-5 

The array is created under the virtual device /dev/your_array, assembled and ready to use (in degraded mode). You can directly start using it while mdadm resyncs the array in the background. It can take a long time to restore parity, you can check the progress with:

$ cat /proc/mdstat

Update configuration file

Since the installer builds the initrd using /etc/mdadm.conf in the target system, you should update the default configuration file. The default file can be overwritten using the redirection operator, because it only contains explanatory comments.

Redirect the contents of the metadata stored on the named devices to the configuration file:

# mdadm --examine --scan > /etc/mdadm.conf
Note: If you are updating your RAID configuration from within the Arch Installer by swapping to another TTY, you will need to ensure that you are writing to the correct mdadm.conf file:
# mdadm --examine --scan > /mnt/etc/mdadm.conf

Once the configuration file has been updated the array can be assembled using mdadm:

# mdadm --assemble --scan

Configure filesystem

The array can now be formatted like any other disk, just keep in mind that:

  • Due to the large volume size not all filesystems are suited (see: File system limits).
  • The filesystem should support growing and shrinking while online (see: File system features).
  • The biggest performance gain you can achieve on a raid array is to make sure you format the volume aligned to your RAID stripe size (see: RAID Math).

Assemble array on boot

If you selected the Non-FS data partition code the array will not be automatically recreated after the next boot. To assemble the array issue the following command:

 # mdadm --assemble --scan /dev/your_array --uuid=your_array_uuid 

or write it to rc.local.

Mounting from a Live CD

If you want to mount your RAID partition from a Live CD, use

# mdadm --assemble /dev/md0 /dev/sda3 /dev/sdb3 /dev/sdc3

(or whatever mdX and drives apply to you)

Note: Live CDs like SystemrescueCD assemble the RAID arrays automatically at boot time if you used the partition type fd at the install of the array)

Removing device, stop using the array

You can remove a device from the array after you mark it as faulty.

# mdadm --fail /dev/md0 /dev/sdxx

Then you can remove it from the array.

# mdadm -r /dev/md0 /dev/sdxx

Remove device permanently (for example in the case you want to use it individally from now on). Issue the two commands described above then:

# mdadm --zero-superblock /dev/sdxx

After this you can use the disk as you did before creating the array.

Warning: If you reuse the removed disk without zeroing the superblock you will LOSE all your data next boot. (After mdadm will try to use it as the part of the raid array). DO NOT issue this command on linear or RAID0 arrays or you will LOSE all your data on the raid array.

Stop using an array:

  1. Umount target array
  2. Repeat the three command described in the beginning of this section on each device.
  3. Stop the array with: mdadm --stop /dev/md0
  4. Remove the corresponding line from /etc/mdadm.conf

Adding a device to the array

Adding new devices with mdadm can be done on a running system with the devices mounted. Partition the new device "/dev/sdx" using the same layout as one of those already in the arrays "/dev/sda".

# sfdisk -d /dev/sda > table
# sfdisk /dev/sdx < table

Assemble the RAID arrays if they are not already assembled:

# mdadm --assemble /dev/md1 /dev/sda1 /dev/sdb1 /dev/sdc1
# mdadm --assemble /dev/md2 /dev/sda2 /dev/sdb2 /dev/sdc2
# mdadm --assemble /dev/md0 /dev/sda3 /dev/sdb3 /dev/sdc3

First, add the new device as a Spare Device to all of the arrays. We will assume you have followed the guide and use separate arrays for /boot RAID 1 (/dev/md1), swap RAID 1 (/dev/md2) and root RAID 5 (/dev/md0).

# mdadm --add /dev/md1 /dev/sdx1
# mdadm --add /dev/md2 /dev/sdx2
# mdadm --add /dev/md0 /dev/sdx3

This should not take long for mdadm to do. Check the progress with:

# cat /proc/mdstat

Check that the device has been added with the command:

# mdadm --misc --detail /dev/md0

It should be listed as a Spare Device.

Tell mdadm to grow the arrays from 3 devices to 4 (or however many devices you want to use):

# mdadm --grow -n 4 /dev/md1
# mdadm --grow -n 4 /dev/md2
# mdadm --grow -n 4 /dev/md0

This will probably take several hours. You need to wait for it to finish before you can continue. Check the progress in /proc/mdstat. The RAID 1 arrays should automatically sync /boot and swap but you need to install Grub on the MBR of the new device manually. Installing_with_Software_RAID_or_LVM#Install_Grub_on_the_Alternate_Boot_Drives

The rest of this guide will explain how to resize the underlying LVM and filesystem on the RAID 5 array.

Note: I am not sure if this can be done with the volumes mounted and will assume you are booting from a live-cd/usb

If you are have encrypted your LVM volumes with LUKS, you need resize the LUKS volume first. Otherwise, ignore this step.

# cryptsetup luksOpen /dev/md0 cryptedlvm
# cryptsetup resize cryptedlvm

Activate the LVM volume groups:

# vgscan
# vgchange -ay

Resize the LVM Physical Volume /dev/md0 (or e.g. /dev/mapper/cryptedlvm if using LUKS) to take up all the available space on the array. You can list them with the command "pvdisplay".

# pvresize /dev/md0

Resize the Logical Volume you wish to allocate the new space to. You can list them with "lvdisplay". Assuming you want to put it all to your /home volume:

# lvresize -l +100%FREE /dev/array/home

To resize the filesystem to allocate the new space use the appropriate tool. If using ext2 you can resize a mounted filesystem with ext2online. For ext3 you can use resize2fs or ext2resize but not while mounted.

You should check the filesystem before resizing.

# e2fsck -f /dev/array/home
# resize2fs /dev/array/home

Read the manuals for lvresize and resize2fs if you want to customize the sizes for the volumes.


A simple one-liner that prints out the status of your Raid devices:

awk '/^md/ {printf "%s: ", $1}; /blocks/ {print $NF}' </proc/mdstat
md1: [UU]
md0: [UU]

For more information see: One-liner: health of Raid Array by Jason Wryan


If you are getting error when you reboot about "invalid raid superblock magic" and you have additional hard drives other than the ones you installed to, check that your hard drive order is correct. During installation, your RAID devices may be hdd, hde and hdf, but during boot they may be hda, hdb and hdc. Adjust your kernel line in /boot/grub/menu.lst accordingly. This is what happened to me anyway.

Recovering from a broken or missing drive in the raid

You might get the above mentioned error also when one of the drives breaks for whatever reason. In that case you will have to fore the raid to still turn on even with one disk short. Type this (change where needed):

# mdadm --manage /dev/md0 --run

Now you should be able to mount it again with something like this (if you had it in fstab):

# mount /dev/md0

Now the raid should be working again and available to use, however with one disk short! So, to add that one disc partition it the way like described above in #Partition_the_Hard_Drives. Once that is done you can add the new disk to the raid by doing:

# mdadm --manage --add /dev/md0 /dev/sdd1

If you type:

# cat /proc/mdstat

you probably see that the raid is now active and rebuilding.

You also might want to update your configuration (see: #Update configuration file).


There are several tools for benchmarking a RAID. The most notable improvement is the speed increase when multiple threads are reading from the same RAID volume.

Tiobench specifically benchmarks these performance improvements by measuring fully-threaded I/O on the disk.

Bonnie++ tests database type access to one or more files, and creation, reading, and deleting of small files which can simulate the usage of programs such as Squid, INN, or Maildir format e-mail. The enclosed ZCAV program tests the performance of different zones of a hard drive without writing any data to the disk.

hdparm should NOT be used to benchmark a RAID, because it provides very inconsistent results.

Additional Resources


Forum threads

RAID with encryption