Difference between revisions of "REFInd"

From ArchWiki
Jump to: navigation, search
m (Planning the partitions and kernel location: link to ESP explanation)
(Boot EFISTUB using rEFInd: simplify note, update to reflect previous changes)
Line 9: Line 9:
== Boot EFISTUB using rEFInd ==
== Boot EFISTUB using rEFInd ==
{{Tip|If you're new to [[EFISTUB]] and/or rEFInd, you need to read [http://www.rodsbooks.com/refind/linux.html The rEFInd Boot Manager: Methods of Booting Linux] before going any further. This section illustrates only one possible use-case for a pure Arch linux system which is not suitable for all configurations, and includes a section with one use-case for dual booting Archlinux with Windows 8.1.}}
{{Tip| rEFInd can boot Linux in many ways. See [http://www.rodsbooks.com/refind/linux.html The rEFInd Boot Manager: Methods of Booting Linux] for coverage of the various approaches. This section illustrates one possible use-case.}}
{{Note|{{pkg|refind-efi}} includes a install script from upstream at {{ic|/usr/bin/refind-install}} which does the job of setting-up of rEFInd similar to the steps below.}}
{{Note|{{pkg|refind-efi}} includes a install script from upstream at {{ic|/usr/bin/refind-install}} which does the job of setting-up of rEFInd similar to the steps below.}}
{{Note|For 32-bit aka IA32 EFI, replace '''x64''' with '''ia32''' (case-sensitive) in the commands below.}}
{{Note|For 32-bit aka IA32 EFI, replace '''x64''' with '''ia32''' in the commands below.}}
* Mount efivarfs
* Mount efivarfs
Line 19: Line 19:
  # mount -t efivarfs efivarfs /sys/firmware/efi/efivars              # ignore if already mounted
  # mount -t efivarfs efivarfs /sys/firmware/efi/efivars              # ignore if already mounted
* Install the {{Pkg|refind-efi}} package.
* Install the {{pkg|refind-efi}} package.
* Copy the following files from their source directory to their destination
* Copy the following files from their source directory to their destination

Revision as of 20:31, 26 March 2014

zh-CN:REFInd rEFInd is a UEFI boot manager. It is a fork of the no-longer-maintained rEFIt and fixes many issues with respect to non-Mac UEFI booting. It is designed to be platform-neutral and to simplify booting multiple OSes.

Planning the partitions and kernel location

rEFInd includes drivers for loading non-FAT32 partitions so it is not necessary to place the kernel and ramdisk on the ESP. For example, rEFInd can mount the root partition and read them directly from /boot.

Boot EFISTUB using rEFInd

Tip: rEFInd can boot Linux in many ways. See The rEFInd Boot Manager: Methods of Booting Linux for coverage of the various approaches. This section illustrates one possible use-case.
Note: refind-efi includes a install script from upstream at /usr/bin/refind-install which does the job of setting-up of rEFInd similar to the steps below.
Note: For 32-bit aka IA32 EFI, replace x64 with ia32 in the commands below.
  • Mount efivarfs
# mount -t efivarfs efivarfs /sys/firmware/efi/efivars              # ignore if already mounted
  • Copy the following files from their source directory to their destination
# cp /usr/share/refind/refind_x64.efi /boot/efi/EFI/refind/refind_x64.efi
# cp /usr/share/refind/refind.conf-sample  /boot/efi/EFI/refind/refind.conf
# cp -r /usr/share/refind/icons /boot/efi/EFI/refind/
# cp -r /usr/share/refind/fonts /boot/efi/EFI/refind/
# cp -r /usr/share/refind/drivers_x64 /boot/efi/EFI/refind/
  • Edit rEFInd's config file at /boot/efi/EFI/refind/refind.conf. The file is well commented and self explanatory. rEFInd should automatically find kernel files in /boot, but it is also possible to add a menu entry for Arch Linux. Set the default boot item to the Archlinux kernel by adding the line:
default_selection vmlinuz

A menu entry can be added to refind.conf such as

menuentry "Arch Linux" {
        icon     EFI/refind/icons/os_linux.icns
        volume   "/"
        loader   /boot/vmlinuz-linux
        initrd   /boot/initramfs-linux.img
        options  "root=PARTUUID=3518bb68-d01e-45c9-b973-0b5d918aae96 rw rootfstype=ext4"

but this may not be necessary unless standard options need to be changed. Note that the "volume" line contains the label of the volume where the root partition is. For alphameric characters only it is not necessary to put the name in quotes, but if you use special characters then the kernel will not boot unless the name is in quotes. Also the partition can be referenced using the PARTUUID or the UUID provided the appropriate string is used as verified from the output of the blkid command. If the root partition is not ext4 then the rootfstype will be as needed for the partition type, but should be detected automatically without this parameter.

Note that if you choose to mount your ESP as a different name to /boot/efi then replace these paths as appropriate as in the lines above.

Note: Modify the loader and initrd paths if you did not place them in your ESP's root. Replace the string after PARTUUID with your root's PARTUUID. Please note in the example above that PARTUUID/PARTLABEL identifies a GPT partition, and differs from the UUID/LABEL, which identifies a filesystem. Using the PARTUUID/PARTLABEL is advantageous because it is invariant if you reformat the partition with another filesystem. It's also useful if you don't have a filesystem on the partition (or use LUKS, which doesn't support LABELs).

To find the PARTUUID (or UUID) for the root partition use:

# blkid


# lsblk -f

to get the partition information matched to the correct root partition.

  • If the kernel and initramfs are located at /boot as default, you can create a refind_linux.conf file inside the directory where the kernel and initramfs files are located. Or you can copy the sample file to the same directory that the kernel and initramfs are located using:
# cp /usr/share/refind/refind_linux.conf-sample /boot/refind_linux.conf
"Boot with defaults"    "root=PARTUUID=XXXXXXXX rootfstype=XXXX ro"
"Boot to terminal"      "root=PARTUUID=XXXXXXXX rootfstype=XXXX ro systemd.unit=multi-user.target"

where the PARTUUID from the blkid command is used, and the rootfstype is commonly ext4.

This file tells rEFInd where the root partition is located for the system boot, so the PARTUUID is that for the root partition.

The drivers that were copied to the refind directory in the ESP include an ext4 driver, and allow the rEFInd binary to read the kernel and initramfs file in the ext4 /boot directory.

Tip: Each line of refind_linux.conf is displayed as a submenu by rEFInd. Access the submenu with "+" or "insert" or "F2" keys.
  • Create a boot entry in the UEFI NVRAM in the motherboard using efibootmgr
# efibootmgr -c -d /dev/sdX -p Y -l /EFI/refind/refind_x64.efi -L "rEFInd"

where sdX is drive containing the EFI partition, and Y is the partition number for the EFI on that drive.

The entries can be checked by just using the command

# efibootmgr

on its own to verify that there is now a refind entry, and the boot order should show that this is the first entry in the list.

For a few system types if the efibootmgr command does not create NVRAM entries correctly, then an alternative is to use bcfg from within a UEFI shell version 2, to write and manage NVRAM entries. Information about this is available elsewhere in the wiki.

Note: As of refind-efi 0.2.7, refind can auto-detect kernels in /boot, if there are UEFI drivers for the filesystem used by /boot partition (or / partition if no separate /boot is used) in the ESP, and are loaded by rEFInd. This is enabled in the default configuration in refind.conf (you may need to include the PATH to the drivers folders in the ESP). See [1] for more info.

Once the system is rebooted when the install is complete the system should then boot to the graphical rEFInd screen after the POST is complete, and by default a 20 second timeout will run after which the system should boot by default to Archlinux (The timeout period can be changed by editing refind.conf). Once the system has booted then the root user can login and continue to configure the newly installed system.

During the 20 second timeout period the rEFInd boot manager can be interrupted to select different icons that can be booted, and it is also possible to change the boot kernel parameters in a similar way to what many users have been familiar with in the past using grub.

It is also possible to get a screenshot of the graphical rEFInd screen by hitting F10 and a bmp image file will be written to the top level directory of the EFI.

When the Archlinux kernel is updated via pacman then no further action is needed other than to reboot if the setup described above is used. For customised setups where the kernel is not placed in the /boot directory then the kernel and initramfs files may need to be moved to the directory where they will be booted before the new kernel will be active after reboot.

Using rEFInd with an existing UEFI Windows installation

Note: The usual caveats of Windows and Arch Dual Boot apply.

rEFInd is compatible with the EFI system partition created by a UEFI Windows installation, so there is no need to create or format another FAT32 partition when installing Arch alongside Windows. Simply mount Windows' ESP and install rEFInd as usual. By default, rEFInd's autodetection feature should recognize any existing Windows/recovery bootloaders.

Upgrading rEFInd

When a new version of the refind package is installed as an update via pacman, then all that is necessary is to copy the refind directories and files, except the refind.conf and refind_linux.conf as in the pure Archlinux install section above.

To automatically update rEFInd to the latest version, you could run refind-install (in cronjob) as alternative to the systemd script below. The command will be executed as follow:

Installing rEFInd on Linux....
ESP was found at /boot/efi using vfat
Found rEFInd installation in /boot/efi/EFI/refind; upgrading it.
Installing driver for ext4 (ext4_x64.efi)
Copied rEFInd binary files

Notice: Backed up existing icons directory as icons-backup.
Existing refind.conf file found; copying sample file as refind.conf-sample
to avoid overwriting your customizations.

rEFInd has been set as the default boot manager.
Existing //boot/refind_linux.conf found; not overwriting.

Installation has completed successfully.

Systemd Automation (Upgrading)

To automate the process of copying refind files and updating the nvram (if needed) use the following script.

Note: If you want to change the directory that refind is installed in the UEFISYS partition, just change the value of $refind_dir in the script
#!/usr/bin/env bash
## COPYRIGHT 2013 : MARK E. LEE (BLUERIDER) : mlee24@binghamton.edu; mark@markelee.com

## LOG
## 1/17/2013 : Version 2 of refind_name_patch is released
##           : Supports long subdirectory location for refind
##           : Updates nvram when needed
##           : 10% speed boost
## 7/15/2013 : Changed arch to match 32-bit (ia32) and 64-bit (x64) naming scheme
##           : Changed directory copying in update-efi-dir to copy tools and drivers directories explicitly
##           : Changed efibootmgr writing code to be more concise and added (-w) to write the entry as per dusktreader's excellent guide : https://docs.google.com/document/d/1pvgm3BprpXoadsQi38FxqMOCUZhcSqFhZ26FZBkmn9I/edit
##           : Function to check if NVRAM boot entry was already listed was fixed to use awk and an if then clause
##           : ref_bin_escape was modified from : ref_bin_escape=${ref_bin//\//\\\\} to remove extra backslashes (error does not show up when using cmdline)
## 7/29/2013 : Changed location of tools,drivers, and binary directory to match capricious upstream move to /usr/share/refind

function main () {  ## main insertion function
  declare -r refind_dir="/boot/efi/EFI/refind"; ## set the refind directory
  arch=$(uname -m | awk -F'_' '{if ($1 == "x86") {print "x"$2} else if ($1 == "i686") {print "ia32"}}') &&  ## get bit architecture
  update-efi-dir;  ## updates or creates the refind directory
  update-efi-nvram;  ## updates nvram if needed

function update-efi-dir () {  ## setup the refind directory
  if [ ! -d $refind_dir ]; then  ## check if refind directory exists
    echo "Couldn't find $refind_dir";
    mkdir $refind_dir &&  ## make the refind directory if needed
    echo "Made $refind_dir";
  if [ "$arch" ]; then  ## check if anything was stored in $arch
    cp -r /usr/share/refind/{refind_$arch.efi,keys,images,icons,fonts,docs,{tools,drivers}_$arch} $refind_dir/  && ## update the bins and dirs
    echo "Updated binaries and directory files for refind at $refind_dir";
    echo "Failed to detect an x86 architecture";

function update-efi-nvram () { ## update the nvram with efibootmgr
  declare -r ref_bin=${refind_dir/\/boot\/efi}/refind_$arch.efi;  ## get path of refind binary (without /boot/efi)
  declare -r ref_bin_escape=${ref_bin//\//\\};  ## insert escape characters into $ref_bin
  [ "$(efibootmgr -v | awk "/${ref_bin_escape//\\/\\\\}/")" ] && ( ## check if boot entry is in nvram \
    echo "Found boot entry, no need to update nvram";
    ) || ( ## if boot entry is not in nvram; add it
    declare -r esp=$(mount -l | awk '/ESP/ {print $1}') &&  ## get ESP partition
    efibootmgr -cgw -d ${esp:0:8} -p ${esp:8} -L "rEFInd" -l $ref_bin_escape && ## update nvram
    echo "
    Updated nvram with entry rEFInd to boot $ref_bin
    Did not copy configuration files, please move refind.conf to $refind_dir/";
main;  ## run the main insertion function
Description=Update rEFInd bootloader files


Description=Update rEFInd directories, binaries, and nvram

ExecStart=/usr/bin/bash /usr/lib/systemd/scripts/refind_name_patchv2

Enable the systemd path unit by running:

# systemctl enable refind_update.path

Apple Macs

In case of Apple Macs, try mactel-bootAUR for an experimental "bless" utility for Linux. If that does not work, use "bless" from within OSX to set rEFInd as default bootloader. Assuming UEFISYS partition is mounted at /mnt/efi within OSX, do

$ sudo bless --setBoot --folder /mnt/efi/EFI/refind --file /mnt/efi/EFI/refind/refind_x64.efi


See VirtualBox#Using Arch under Virtualbox EFI mode.