Difference between revisions of "RVM"
m (sorry, missed some places.)
m (domain name change)
|(2 intermediate revisions by 2 users not shown)|
|Line 1:||Line 1:|
a to [].
== Installing RVM ==
== Installing RVM ==
Revision as of 22:07, 13 November 2012
There exists a similar application that you may also want to consider: rbenv.
- 1 Installing RVM
- 2 Post Installation
- 3 Using RVM
- 4 Troubleshooting
- 5 See Also
The install process is very easy, and is the very same for any distro, including Archlinux. You have two choices, one system-wide, another as a user. The first is for production servers, or if your are alone on your machine. You'll need root privileges. The second is the recommended for multiple users on the same machine (like a development test box). If you do not know which to choose, start with a single user installation.
The upstream instructions for installing RVM should just work. The install script is aware enough to tell you what packages you need to install on Archlinux to make different rubies work. This usually involves gcc and some other stuff needed to compile ruby.
As an observation, installing RVM with gem is not recommended anymore. This article uses the recommended documentation with minor tweaks to make it work on Archlinux.
Before starting, you will need the following to get the installation process going:
$ pacman -S git curl
For most purposes, the recommended installation method is single-user, which is a self-contained RVM installation in a user's home directory.
Use the script that rvm docs recommends to install. Make sure to run this script as the user for whom you want RVM installed (i.e. your normal user that you use for development).
$ curl -L get.rvm.io | bash -s stable
(to install a specific version replace stable with, for example, -- --version 1.13.0)
If instead you want to check the script before running it, do:
$ curl -L get.rvm.io > rvm-install
Inspect the file, then run it with:
$ bash < ./rvm-install
After the script has finished, then add the following line to the end of your ~/.bash_login or ~/.bashrc (or ~/.zprofile or whatever):
$ [[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm"
Now, close out your current shell or terminal session and open a new one. (You may attempt reloading your ~/.bash_login with the following command:
$ source ~/.bash_login
However, closing out your current shell or terminal and opening a new one is the preferred way for initial installations.)
System-wide installation is a similar procedure to the single user install. However, instead run the install script with sudo. Do not run the installer directly as root!
$ curl -L get.rvm.io | sudo bash -s stable
(to install a specific version replace stable with, for example, -- --version 1.13.0)
After the script has finished, add yourself and your users to the 'rvm' group. (The installer does not auto-add any users to the rvm group. Admins must do this.) For each one, repeat:
$ sudo usermod -a -G rvm <user>
Group memberships are only evaluated at login time. Log the users out, then back in. You too: close out your current shell or terminal session and open a new one. (You may attempt reloading your ~/.bash_login with the following command:
$ source ~/.bash_login
However, closing out your current shell or terminal and opening a new one is the preferred way for initial installations. Alternatively, you can use the "newgrp rvm" command and check with "id" to see whether the shell has picked up the new group membership of your user)
RVM will be automatically configured for every user on the system (in opposite to the single-user installation); this is accomplished by loading /etc/profile.d/rvm.sh on login. Archlinux defaults to parsing /etc/profile which contains the logic to load all files residing in the /etc/profile.d/ directory.
Before installing gems with multi-user rvm, make sure that /etc/gemrc does not have the line "gem: --user-install". If it does you need to comment it out otherwise the gems will install to the wrong place.
You only use the sudo command during the install process. In multi-user configurations, any operations which require sudo access must use the rvmsudo command which preserves the RVM environment and passes this on to sudo. There are very few cases where rvmsudo is required once the core install is completed, except for when updating RVM itself. There is never a reason to use sudo post-install. rvmsudo should only be needed for updating with
$ rvmsudo rvm get head
A cautionary action
In order to prevent the installation breakage by this cause, you may add this configuration to your /etc/sudoers file:
## Cmnd alias specification Cmnd_Alias RVM = /usr/local/rvm/rubies/<ruby_interpreter>/bin/gem, \ /usr/local/rvm/rubies/<another_ruby_interpreter>/bin/gem, \ /usr/local/rvm/bin/rvm ## User privilege specification root ALL=(ALL) ALL ## Uncomment to allow members of group wheel to execute any command %wheel ALL=(ALL) ALL, !RVM
Where <ruby_interpreter> would be —for example— ruby-1.9.2-p290.
After the installation, check everything worked with this command:
$ type rvm | head -n1
The response should be:
$ rvm is a function
If you receive rvm: not found, you may need to source your ~/.bash_login (or wherever you put the line above):
$ . ~/.bash_login
Check if the rvm function is working:
$ rvm notes
Finally, see if there are any dependency requirements for your installation by running:
$ rvm requirements
(Follow the returned instructions if any.)
Very important: whenever you upgrade RVM in the future, you should always run rvm notes and rvm requirements as this is usually where you will find details on any major changes and/or additional requirements to ensure your installation stays working.
You may put in your ~/.bashrc the following lines to get some useful features:
# Display the current RVM ruby selection PS1="\$(/usr/local/rvm/bin/rvm-prompt) $PS1" # RVM bash completion [[ -r /usr/local/rvm/scripts/completion ]] && . /usr/local/rvm/scripts/completion
Or if you're running as a single user:
# RVM bash completion [[ -r "$HOME/.rvm/scripts/completion" ]] && source "$HOME/.rvm/scripts/completion"
The RVM documentation is quite comprehensive and explanatory. However, here are some RVM usage examples to get you started.
To see what Ruby environments are available to install, run:
$ rvm list known
To install one, run:
$ rvm install <ruby_version>
For example, to install Ruby 1.9.2 one would run the following command:
$ rvm install 1.9.2
This should download, configure and install Ruby 1.9.2 in the place you installed RVM. For example, if you did a single user install, it will be in ~/.rvm/rubies/1.9.2.
You can define a default ruby interpreter by doing:
$ rvm use <ruby_version> --default
If not, the default environment will be the system ruby in /usr —if you have installed one using pacman— or none.
To switch from one environment to another simply run:
$ rvm use <ruby_version>
For example to switch to Ruby 1.8.7 one would run the following command:
$ rvm 1.8.7
(As you see, the flag use is not really necessary.)
You should get a message telling you the switch worked. It can be confirmed by running:
$ ruby --version
Note that this environment will only be used in the current shell. You can open another shell and select a different environment for that one in parallel.
In case you have set a default interpreter as explained above, you can do the switch with:
$ rvm default
If you wish the ruby interpreter that is outside RVM (i.e. the one installed in /usr by the standard Archlinux package), you can switch to it using:
$ rvm system
To see all installed Ruby environments, run the following command:
$ rvm list
If you've installed a few rubies, this might generate a list like so:
rvm Rubies jruby-1.5.0 [ [i386-java] ] => ruby-1.8.7-p249 [ i386 ] ruby-1.9.2-head [ i386 ] System Ruby system [ i386 ]
The ASCII arrow indicates which environment is currently enabled. In this case, it is Ruby 1.8.7. This could be confirmed by running:
$ ruby --version ruby 1.8.7 (2010-01-10 patchlevel 249) [i686-linux]
RVM has a valued feature called gemsets which enables you to store different sets of gems in compartmentalized independent ruby setups. This means that ruby, gems and irb are all separate and self-contained from the system and each other.
Gemsets must be created before being used. To create a new gemset for the current ruby, do this:
$ rvm use <ruby_version> $ rvm gemset create <gemset_name>
Alternatively, if you prefer the shorthand syntax offered by rvm use, employ the --create option like so:
$ rvm use <ruby_version>@<gemset_name> --create
You can also specify a default gemset for a given ruby interpreter, by doing:
$ rvm use <ruby_version>@<gemset_name> --default
To use a gemset:
$ rvm gemset use <gemset_name>
You can switch to a gemset as you start to use a ruby, by appending @<gemset_name> to the end of the ruby selector string:
$ rvm use <ruby_version>@<gemset_name>
When you install a ruby environment, it comes with two gemsets out of the box, their names are default and global. You will usually find in the latter some pre-installed common gems, while the former always starts empty.
A little bit about where the default and global gemsets differ: When you do not use a gemset at all, you get the gems in the default set. If you use a specific gemset (say @testing), it will inherit gems from that ruby's @global. The global gemset is to allow you to share gems to all your gemsets.
Within a gemset, you can utilize usual RubyGems commands
$ gem install <gem>
$ gem uninstall <gem>
to remove gems, and
$ gem list
to view installed ones.
If you are deploying to a server, or you do not want to wait around for rdoc and ri to install for each gem, you can disable them for gem installs and updates. Just add these two lines to your ~/.gemrc or /etc/gemrc:
install: --no-rdoc --no-ri update: --no-rdoc --no-ri
To see the name of the current gemset:
$ rvm gemset name
To list all named gemsets for the current ruby interpreter:
$ rvm gemset list
To list all named gemsets for all interpreters:
$ rvm gemset list_all
This action removes the current gemset:
$ rvm gemset use <gemset_name> $ rvm gemset delete <gemset_name>
By default, rvm deletes gemsets from the currently selected Ruby interpreter. To delete a gemset from a different interpreter, say 1.9.2, run your command this way:
$ rvm 1.9.2 do gemset delete <gemset_name>
This action removes all gems installed in the gemset:
$ rvm gemset use <gemset_name> $ rvm gemset empty <gemset_name>
To upgrade to the most recent release version:
$ rvm get latest
Upgrading to the latest repository source version (the most bugfixes):
$ rvm get head
Remember to use rvmsudo for multi-user setups. Update often!
$ rvm implode
is going to wipe out the RVM installation —cleanly—.
This is just a simple introduction to switching ruby versions with RVM and managing different set of gems in different environments. There is lots more that you can do with it! For more information, consult the very comprehensive RVM documentation. This page is a good place to start.
You will need to take care with rvm installations, since ArchLinux is very well updated, and some earlier ruby's patchlevels do not like it. RVM many times do not choose the latest patchlevel version to install, and you'll need to check manually on the ruby website, and force RVM to install it.
"data definition has no type or storage class"
This appears to be specific to 1.8.7, but if you get this error while compiling the following steps will fix your problem:
$ cd src/ruby-1.8.7-p334/ext/dl $ rm callback.func $ touch callback.func $ ruby mkcallback.rb >> callback.func $ rm cbtable.func $ touch cbtable.func $ ruby mkcbtable.rb >> cbtable.func
Naturally, substitute the actual build path to your source, which will be something like ~/.rvm/src/.
Ruby 1.8.x won't compile with RVM
This is a known issue on Arch Linux, and is caused by a problem with openssl. Arch uses openssl 1.0, lower patchlevels of 1.8.7 assumes 0.9.
Certain patch levels may not build (p352 for example), p299 should work fine and can be installed using the following command:
$ rvm remove 1.8.7 $ rvm install 1.8.7-p299
Another approach is to install local openssl via RVM:
$ rvm pkg install openssl $ rvm remove 1.8.7 $ rvm install 1.8.7 -C --with-openssl-dir=$HOME/.rvm/usr
It may be necessary to patch 1.8.7:
$ wget http://redmine.ruby-lang.org/attachments/download/1931/stdout-rouge-fix.patch $ rvm remove 1.8.7 $ rvm install --patch Downloads/stdout-rouge-fix.patch ruby-1.8.7-p352
Ruby 1.9.1 won't compile with RVM
Like with 1.8.x, earlier patchlevels do not like the OpenSSL 1.0. Then you can use the very same solution above, by installing openssl locally on RVM.
$ rvm pkg install openssl $ rvm remove 1.9.1 $ rvm install 1.9.1 -C --with-openssl-dir=$HOME/./rvm/usr
The patchlevels >p378 have a problem with gem paths, when $GEM_HOME is set. The problem is known and fixed in 1.9.2. (http://redmine.ruby-lang.org/issues/3584). If you really need 1.9.1 please use p378.
$ rvm install 1.9.1-p378 -C --with-openssl-dir=$HOME/.rvm/usr