- 1 Introduction
- 2 Preparation
- 3 Package and Gem version Overview
- 4 Ruby 1.8 Environment
- 5 Create the Database Structure
- 6 Running Redmine
- 7 Resources
This article explains how to install Redmine, an open-source web-based project management and bug-tracking tool, on Arch Linux. For this article, MySQL(with C bindings provided by the 'mysql' gem) are used.
Package and Gem version Overview
The following packages are used at the time of this [re]writing:
ruby 1.8 <- the PKGBUILD should edited to include 'rails=2.3.5' in the Provides array(more below) rubygems 1.8 mysql 5.1.42 apache 2.2.14 redmine-mysql-git-20100124 (gems) rake 0.8.3 rack 1.0.1 rails 2.3.5 mysql 2.8.1
Ruby 1.8 Environment
As Redmine doesn't support ruby 1.9, we need to use the older 1.8 from AUR instead. Remove the "ruby" package(if you have it installed), so that it doesn't conflict, and retrieve and build the packages w any way you're comfortable with.
pacman -R ruby yaourt -S ruby1.8 yaourt -S rubygems1.8 # ruby1.8 installs ruby-1.8 executable. link it to "ruby": cd /usr/bin ln -s /usr/bin/ruby-1.8 /usr/bin/ruby # (optional) link gem-1.8 to gem ln -s /usr/biin/gem-1.8 /usr/bin/gem # and retrieve the gems gem install rake -v=0.8.3 gem install rack -v=1.0.1 gem install rails -v=2.3.5
Redmine can work with MySQL 4.1 or higher, PortageSQL 8 or SQLite 3.
Install the MySQL gem:
gem install mysql -v=2.8.1
Install MySQL by typing:
pacman -S mysql
For full installation and configuration tutorial see MySQL.
sudo /etc/rc.d/mysqld start
Create database and user for redmine to use:
mysql -u root -p create database redmine character set utf8; create user 'redmine'@'localhost' identified by 'YOUR_PASSWORD'; grant all privileges on redmine.* to 'redmine'@'localhost';
pacman -S sqlite3
SQLite is actually not a standalone application like most databases. Instead it is a C library that is linked to by the executable that is using it. Therefore, you need to point to the SQLite source to install the ruby gem.
gem install sqlite3-ruby --with-sqlite3-include=/usr/include --with-sqlite3-lib=/usr/lib
production: adapter: mysql database: redmine host: localhost username: redmine password: YOUR_PASSWORD encoding: utf8
production: adapter: sqlite3 dbfile: db/redmine.db
If you used a different database name or username in section Redmine_setup#Database_Preparation make sure to change them here as well.
Create the Database Structure
Run the following command inside redmine root directory:
rake db:migrate RAILS_ENV=production
This will create the database tables and the following admin account:
Username: admin Password: admin
Now we need to populate the database with default information. Run the following:
rake redmine:load_deafault_data RAILS_ENV=production
Using WEBrick Server
Run the WEBrick server:
scripts/server -e production
Now navigate to:
If everything went fine, you should be able to see the main page of Redmine. You should login with default admin account and configure your new redmine. Don't forget to change admin's password.
Using Apache Web Server(CGI)
Install apache according to Apache.
Make sure that Redmine works fine with the WEBrick server. Copy redmine directory content to /srv/http/ (or any other directory you use for your server):
sudo mkdir /srv/http/redmine/ sudo cp -r * /srv/http/redmine/
(The last command assumes you are inside /opt/redmine directory).
Note: All other commands assume that you are inside the /srv/http/redmine/ folder (or any other folder you decided to use for your server).
Copy dispatch.cgi.example file:
cp public/dispatch.cgi.example public/dispatch.cgi
Give dispatch.cgi execute permission:
chmod 775 public/dispatch.cgi
Uncomment the following line from config/environment.rb:
ENV['RAILS_ENV'] ||= 'production'
Edit /etc/httpd/conf/httpd.conf by adding the following:
<VirtualHost *:80> ServerName YOUR-DOMAIN ServerAdmin webmaster@<YOUR-DOMAIN>.com DocumentRoot /srv/http/redmine/public/ ErrorLog logs/redmine_error_log <Directory "/srv/http/redmine/public/"> Options Indexes ExecCGI FollowSymLinks Order allow,deny Allow from all AllowOverride all </Directory> </VirtualHost>
Give the http user and group the ability to read/write the following folders:
chown -R http.http files log tmp vendor
sudo /etc/rc.d/httpd restart
Surf to your server and check if it works. Notice that most likely it will work slower then with WEBrick server, so if there is not special need to run redmine on apache I personally suggest to use WEBrick Server.
Apache w/ Phusion Passenger
The CGI method described earlier is a bit slower than WEBrick server, so here I am going to describe another method by installing apache module called Phusion Passenger (also known as mod rails) similar to python module you probably used when installed Trac. The basic idea was borrowed from Samson's Weblog.
# install passenger gem install passenger # install the apache2 module passenger-install-apache2-module
This will guide you through the module compilation and installation. Note the settings it will show you in the end. They are important.
# using ''/srv/http'' as the server root dir, make a symbolic link to the redmine/public dir ln -s /path/to/redmine-0.8.5/public /srv/http/redmine
Important: Make sure you make a link to the public directory of redmine!
Now edit /etc/httpd/conf/httpd.conf and add the following (again, make sure you use the directories that passenger-install-apache2-module gave you):
LoadModule passenger_module /usr/lib/ruby/gems/1.8/gems/passenger-2.2.5/ext/apache2/mod_passenger.so PassengerRoot /usr/lib/ruby/gems/1.8/gems/passenger-2.2.5 PassengerRuby /usr/lib/ruby
And add this:
<VirtualHost *:80> # server DocumentRoot, address, and admin email RailsBaseURI /redmine #<- We add this, if you named your symbolic link differently write it here </VirtualHost>
NOTE: you need to restart Apache(if it was running) for the changes to take effect
Verify that everything is setup correctly by going to http://MY-SERVER-IP-ADDRESS/redmine. Insert non-formatted text here