Difference between revisions of "Reset lost root password"

From ArchWiki
Jump to navigation Jump to search
(Pointing out disk encryption as a countermeasure to password recovery)
(Removed the "erase password" paragraph. We do not want users fucking up their systems like that. Really, we don't want that.)
Line 18: Line 18:
# Exit [[Change Root|change root]].
# Exit [[Change Root|change root]].
# Reboot, and remember your password.
# Reboot, and remember your password.
=== Password Erase ===
1. Boot the LiveCD, and mount your root ('''/''') partition.  For example:
mkdir /mnt/arch
mount /dev/sda2 /mnt/arch
2. Edit the password file with your editor.  Example vim:
vim /mnt/arch/etc/shadow
3. Delete the second field on the root line (in [[Vim|vim]] this can be done by going to the first letter/symbol in the field and typing '''d/:/''' then '''Enter'''):
4. Save the file (''':x''' in vim).
5. Reboot and root login will not require a password.
== Using GRUB to Invoke Bash ==
== Using GRUB to Invoke Bash ==

Revision as of 22:50, 11 July 2013

zh-cn:Password Recovery This guide will show you how to recover a forgotten root password. A several methods are available that can help you accomplish this.

Using a LiveCD

With a LiveCD a couple methods are available: change root and use the passwd command, or erase the password field entry. Any Linux capable LiveCD can be used, albeit to change root it must match your installed architecture type.

Change Root

  1. Boot the LiveCD, and change root.
  2. Use the passwd command to reset your root password.
  3. Exit change root.
  4. Reboot, and remember your password.

Using GRUB to Invoke Bash

1. Select the appropriate boot entry in the GRUB menu and press e to edit the line.

2. Select the kernel line and press e again to edit it.

3. Append init=/bin/bash at the end of line.

4. Press b to boot (this change is only temporary and will not be saved to your menu.lst). After booting you will be at the bash prompt.

5. Your root file system should be mounted as readonly so remount it as read/write:

# mount -n -o remount,rw /

6. Use the passwd command to create a new root password.

7. Reboot and do not lose your password again!

Note: Some keyboards may not be loaded properly by the init system with this method and you will not be able to type anything at the bash prompt. If this is the case, you will have to use another method.


An attacker could use the methods mentioned above to break into your system. No matter how secure the operating system is or how good passwords are, having physical access amounts to loading an alternate OS and exposing your data, unless you use full disk encryption.