From ArchWiki
Revision as of 17:51, 6 October 2017 by Kewl (talk | contribs) (OpenNIC: examples of opennic namespace)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The configuration file for DNS resolvers is /etc/resolv.conf. From resolv.conf(5):

The resolver is a set of routines in the C library that provide access to the Internet Domain Name System (DNS). The resolver configuration file contains information that is read by the resolver routines the first time they are invoked by a process. The file is designed to be human readable and contains a list of keywords with values that provide various types of resolver information.
If this file does not exist, only the name server on the local machine will be queried; the domain name is determined from the hostname and the domain search path is constructed from the domain name.

DNS in Linux

Your ISP (usually) provides working DNS servers, and a router may also add an extra DNS server in case it has its own cache server. Switching between DNS servers does not represent a problem for Windows users, because if a DNS server is slow or does not work it will immediately switch to a better one. However, Linux usually takes longer to timeout, which could be the reason why you are getting a delay.


Use drill (provided by package ldns) before any changes, repeat after making the adjustments and compare the query time(s). The following command uses the nameservers set in /etc/resolv.conf:

$ drill

You can also specify a specific nameserver's ip address, bypassing the settings in your /etc/resolv.conf:

$ drill

For example to test Google's name servers:

$ drill @

To test a local name server (such as unbound) do:

$ drill @

Alternative DNS servers

To use alternative DNS servers, edit /etc/resolv.conf and add them at the top of the list so they are used first, optionally removing or commenting out other servers. Currently, you may include a maximum of three nameservers.

Note: Changes made to /etc/resolv.conf take effect immediately.
Tip: If you require more flexibility, e.g. more than three nameservers, you can use a local DNS resolver like dnsmasq or unbound. In this case the nameserver IP address will likely be


OpenNIC provides free uncensored nameservers located in multiple countries.

The full list of public servers is available at and a shortlist of nearest nameservers for optimal performance is generated on their home page.

Alternatively, the anycast servers below can be used; while reliable their latency fluctuates a lot.

# OpenNIC IPv4 nameservers (Worldwide Anycast)
# OpenNIC IPv6 nameservers (Worldwide Anycast)
nameserver 2a05:dfc7:5::53
nameserver 2a05:dfc7:5::5353
Note: Use of OpenNIC DNS servers will allow host name resolution in the traditional Top-Level Domain (TLD) registries, but also in OpenNIC or afiliated operated namespaces (.o, .libre, .dyn...)

Cisco Umbrella (formerly OpenDNS)

OpenDNS provided free alternative nameservers, was bought by Cisco in Nov. 2016 and continues to offer OpenDNS as end-user product of its "Umbrella" product suite with focus on Security Enforcement, Security Intelligence and Web Filtering. The old nameservers still work but are pre-configured to block adult content:

# OpenDNS IPv4 nameservers
# OpenDNS IPv6 nameservers
nameserver 2620:0:ccc::2
nameserver 2620:0:ccd::2


Google's nameservers can be used as an alternative:

# Google IPv4 nameservers
# Google IPv6 nameservers
nameserver 2001:4860:4860::8888
nameserver 2001:4860:4860::8844


Comodo provides another IPv4 set, with optional (non-free) web-filtering. Implied in this feature is that the service hijacks the queries.

# Comodo nameservers 


Yandex.DNS has three options:

# Basic Yandex.DNS - Quick and reliable DNS
nameserver              # Preferred IPv4 DNS
nameserver              # Alternate IPv4 DNS

nameserver 2a02:6b8::feed:0ff     # Preferred IPv6 DNS
nameserver 2a02:6b8:0:1::feed:0ff # Alternate IPv6 DNS
# Safe Yandex.DNS - Protection from virus and fraudulent content
nameserver             # Preferred IPv4 DNS
nameserver              # Alternate IPv4 DNS

nameserver 2a02:6b8::feed:bad     # Preferred IPv6 DNS
nameserver 2a02:6b8:0:1::feed:bad # Alternate IPv6 DNS
# Family Yandex.DNS - Without adult content
nameserver              # Preferred IPv4 DNS
nameserver              # Alternate IPv4 DNS

nameserver 2a02:6b8::feed:a11     # Preferred IPv6 DNS
nameserver 2a02:6b8:0:1::feed:a11 # Alternate IPv6 DNS

Yandex.DNS' speed is the same in the three modes. In Basic mode, there is no traffic filtering. In Safe mode, protection from infected and fraudulent sites is provided. Family mode enables protection from dangerous sites and blocks sites with adult content.


UncensoredDNS is a free uncensored DNS service. It is run by a private individual and consists in one anycast served by multiple servers and one unicast node hosted in Denmark.

# IPv4 nameservers
nameserver    ##
nameserver      ##
# IPv6 nameservers
nameserver 2001:67c:28a4::   ##
nameserver 2a01:3a0:53:53::  ##
Note: Its servers listen to port 5353 as well as the standard port 53. This can be used in case your ISP hijacks port 53.

Preserve DNS settings

dhcpcd, netctl, NetworkManager, and various other processes can overwrite /etc/resolv.conf. This is usually desirable behavior, but sometimes DNS settings need to be set manually (e.g. when using a static IP address). There are several ways to accomplish this.

  • If you are using dhcpcd, see #Modify the dhcpcd config below.
  • If you are using netctl and static IP address assignment, do not use the DNS* options in your profile, otherwise resolvconf is called and /etc/resolv.conf overwritten.

With NetworkManager

To stop NetworkManager from modifying /etc/resolv.conf, edit /etc/NetworkManager/NetworkManager.conf and add the following in the [main] section:


/etc/resolv.conf might be a broken symlink that you will need to remove after doing that. Then, just create a new /etc/resolv.conf file.

Using openresolv

openresolv provides a utility resolvconf, which is a framework for managing multiple DNS configurations. See resolvconf(8) and resolvconf.conf(5) for more information.

The configuration is done in /etc/resolvconf.conf and running resolvconf -u will generate /etc/resolv.conf.

Modify the dhcpcd config

dhcpcd's configuration file may be edited to prevent the dhcpcd daemon from overwriting /etc/resolv.conf. To do this, add the following to the last section of /etc/dhcpcd.conf:

nohook resolv.conf

Alternatively, you can create a file called /etc/resolv.conf.head containing your DNS servers. dhcpcd will prepend this file to the beginning of /etc/resolv.conf.

Or you can configure dhcpcd to use the same DNS servers every time. To do this, add the following line at the end of your /etc/dhcpcd.conf, where dns-server-ip-addressses is a space separated list of DNS IP addresses.

static domain_name_servers=dns-server-ip-addresses

For example, to set it to Google's DNS servers:

static domain_name_servers=

Write-protect /etc/resolv.conf

Another way to protect your /etc/resolv.conf from being modified by anything is setting the immutable (write-protection) attribute:

# chattr +i /etc/resolv.conf

Use timeout option to reduce hostname lookup time

If you are confronted with a very long hostname lookup (may it be in pacman or while browsing), it often helps to define a small timeout after which an alternative nameserver is used. To do so, put the following in /etc/resolv.conf.

options timeout:1

Tips and tricks

Local domain names

If you want to be able to use the hostname of local machine names without the fully qualified domain names, then add a line to resolv.conf with the local domain such as:


That way you can refer to local hosts such as as simply mainmachine1 when using the ssh command, but the drill command still requires the fully qualified domain names in order to perform lookups.