Difference between revisions of "Rtl8187 wireless"

From ArchWiki
Jump to navigation Jump to search
m (Using the driver: deduplication, style)
(contained only general information, the driver itself "should just work" or the general informations are enough)
Line 1: Line 1:
[[Category:Wireless Networking]]
#REDIRECT [[Wireless Setup]]
{{Merge|Wireless Setup|This page contains mostly general information, which duplicate [[Wireless Setup]]. This page should be merged there.}}
This page describes how to get the '''rtl8187''' wifi-driver working
The rtl8187 chip is made for usb-cards/dongles. It supports 802.11(a)/b/g and the following encryptions:  WEP, WPA and WPA2. The rtl8187 driver is in the kernel now.
== Using the driver ==
Make sure that you have loaded the rtl8187 module with
# modprobe rtl8187
Then run
# dmesg | grep rtl8187
You should see some output like this:
usbcore: registered new interface driver rtl8187
If you see that line everything should be OK.
If everything is right, you should have two new interfaces: {{ic|wlan0}} and {{ic|wmaster0}}.
== What to do if your connection always times out? ==
The open source driver suffers from a lot of tx excessive retries and invalid misc errors for some unknown reason, resulting in a lot of packet loss and it keeps disconnecting, some times instantly.
=== Lowering the rate ===
The solution can be found in this thread: https://bbs.archlinux.org/viewtopic.php?pid=299642
Just set the rate to 5.5
# iwconfig wlan0 rate 5.5M auto
Fixed option should ensure that it doesn't change the rate on its own, thus making the connection a bit more stable:
# iwconfig wlan0 rate 5.5M fixed
=== Lowering the txpower ===
You can try lowering the transmit power as well. This may save power as well:
iwconfig wlan0 txpower 5
or even as low as 0. Valid settings are from 0 to 20, auto and off for the stock kernel driver.
=== Setting rts and fragmentation thresholds ===
Default iwconfig options have rts and fragmentation thresholds off. These options are particularly useful when there are many adjacent APs or in a noisy environment.
The minimum value for fragmentation value is 256 and maximum is 2346. In many windows drivers the maximum is the default value:
iwconfig wlan0 frag 2346
For rts minimum is 0, maximum is 2347. Once again windows drivers use maximum as the default:
iwconfig wlan0 rts 2347
== See also ==
*[http://wireless.kernel.org/ The Linux Wireless project]
*[http://aircrack-ng.org/doku.php?id=r8187 Aircrack-ng information for rtl8187 chips]

Revision as of 22:30, 3 August 2013

Redirect to: