Runit is a process supervisor. It includes runit-init, which can replace sysv's init as pid1, or can be run from inittab or your init system of choice. Runit's simple collection of tools can be used to build flexible dependency structures and distributed systems, or blazing fast parallel runlevel changes (including the initial boot).
See G. Pape's Runit Page for a complete description, but follow the installation instructions below for your Arch system.
To replace init with runit-init
- install runit-run-git from the AUR
- choose/create a default runlevel (see Run Levels)
If you just want to get your feet wet and not replace init just yet, runit-dietlibc can be installed side-by-side with the regular Arch initscripts, providing just process supervision of those services you put in /var/service.
- install runit-dietlibc from the AUR
- start runsvdir /var/service using your current init scheme (inittab/rc.local/systemd, whatever)
You may install runit-services-git and/or runit-scripts to install many services built for runit's style of supervision.
The runit-services-git package puts services in /etc/sv and uses /usr/bin/rsvlog as a logger (it's a shell script, take a look and modify to taste, improvements welcome).
runit-scripts puts many new runlevels and symlinks them to the service directories it creates in /etc/runit/runsvdir/all, and uses its own /usr/bin/nsvlog script for logging.
- sv - used for controlling services, getting status of services, and dependency checking.
- runsv - supervises a process, and optionally a log service for that process.
- svlogd - a simple but powerful logger, includes auto-rotation based on different methods (time, size, etc), post-processing, pattern matching, and socket (remote logging) options. Say goodbye to logrotate and the need to stop your services to rotate logs.
- runsvchdir - changes service levels (runlevels, see below).
- runsvdir - starts a supervision tree
- runit-init - PID 1, tiny, does almost nothing, dietlibc staticly compiled. Just what you want your PID 1 to be.
See the manpages for usage details not covered below.
Added by runit-dietlibc and runit-run
- /etc/runit/1 - bootstraps the system using arch rc scripts
- /etc/runit/2 - starts single or multi-user runlevels using arch's rc.single or rc.multi
- /etc/runit/3 - brings the system down using arch's rc scripts
- /etc/runit/runsvdir/* - various runlevels
- /usr/bin/rsvlog - a wrapper to svlogd meant to be symlinked as 'run' in a log service
- /etc/sv/* - the service directories available (more available here when you install runit-services-git)
Added by runit-scripts
- /etc/runit/1_new - meant to be an alternate way to bootstrap, does not necessarily use arch boot scripts
- /etc/runit/2_new - single/multi user runlevels (not based on arch scripts)
- /etc/runit/3_new - take the system down
- /etc/runit/runsvdir/all - every service directory available
- /etc/runit/runsvdir/* - various runlevels
- /usr/bin/nsvlog - wrapper meant to be symlinked as 'run' in a log service
Run Levels and Service Directories
Runit uses directories of symlinks to specify runlevels, other than the 3 main ones, which are defined in /etc/runit/1, 2, and 3.
1 bootstraps the system, 2 starts runsvdir on /service, and 3 stops the system.
While in run level 2, you are not contstrained to any amount service levels (equivalent to runlevels in sysvinit). You can runschdir to any directory (full of service directory symlinks) you've made in /etc/runit/runsvdir/. This becomes very handy in cases where you have an HA (Failover) setup, and you have one machine that can take over services for many other machines, simply by runsvchdir <theservicedir>.
You can also run trees of dependent service levels by having user-level supervision directories. See User Level Services below.
By default, the runit-run-git packages uses a very minimal service set, defined in /etc/runit/runsvdir/runit-default and symlinked to /etc/runit/runsvdir/default.
It only gives gettys on tty2 and tty3, so you will boot to just console scroll and a tidy 'runsvchdir: default: current'. This means when you start X it will be on tty4.
To go back to the standard arch consoles, use the arch-default directory in /etc/runit/runsvdir (symlink it to /etc/runit/runsvdir/default). Better yet, create your own directory in /etc/runit/runsvdir and add the symlinks you want for just the services you desire. Remember to take any services you start with runit out of DAEMONS in /etc/rc.conf, they don't need to be started there, and runit will allow parallel startup without backgrounding them.
For convenience I'll be using /service as the service directory in these examples. Since this has not been accepted by FHS, it is only made available as a symlink in the runit-run-git package. This allows importing of /service scripts written by others without as much fuss. If you only install runit-dietlibc, you would use /var/service as your service directory, or make the /service symlink to /var/service yourself.
Listing running services
run: /service/agetty-2: (pid 4120) 7998s run: /service/agetty-3: (pid 4119) 7998s run: /service/bougyman: (pid 4465) 7972s run: /service/bougyx: (pid 4135) 7998s; run: log: (pid 4127) 7998s run: /service/cron: (pid 4137) 7998s; run: log: (pid 4122) 7998s run: /service/dialer: (pid 4121) 7998s run: /service/qmail: (pid 4138) 7998s; run: log: (pid 4126) 7998s run: /service/smtpd: (pid 4136) 7998s; run: log: (pid 4125) 7998s run: /service/socklog-klog: (pid 4139) 7998s; run: log: (pid 4132) 7998s run: /service/socklog-unix: (pid 4133) 7998s; run: log: (pid 4124) 7998s run: /service/ssh: (pid 4134) 7998s; run: log: (pid 4123) 7998s
Services should live in /etc/sv; however, the runit-scripts package puts a bunch of common ones in /etc/runit/runsvdir/all. We're working to replace/convert these to /etc/sv in the runit-services-git package.
Create and Start a service:
Stops a service immediately (would still start on next boot):
Restarts a service:
Reloads a service:
Shows status of a service and it's log service:
Stops a service, and disables it (won't start next boot):
Refer to man sv for more details.
Shut down the system
Reboot the system
We've symlinked /sbin/runit-init to /sbin/init in runit-run-git, so as not to have to change grub stuff. The original sysvinit can be started (even after a runit-run-git install) with init=/sbin/init.sysv appended to your kernel command line.
User Level Services
You can extend the supervision tree by starting a runsvdir as a specific user, giving that user control of their own supervise tree.
Add a user level service tree
Create /etc/sv/homes/joeuser/run with the following:
#!/bin/sh export PATH=/home/joeuser/bin:$PATH # optional, if your services rely on binaries in ~/bin exec 2>&1 \ sudo -H -u joeuser runsvdir -P /home/joeuser/service 'log:...................................................................................................................................' # Requires sudo, of course
Then symlink /etc/sv/homes/joeuser to /service and any service joe puts in ~/service will start, as him, with his environment.
(the .......... represent placeholders, the proceess will print stdout/err every 5 seconds for each placeholder . you use in this case)
Create an X session service for a user
Create the /etc/sv/joeuserX/run script with the following
#!/bin/sh exec 2>&1 \ su -c xinit - joeuser
Then symlink /etc/sv/joeuserX to /service. joe's X session will now always run (in this runlevel). To protect it using joe's ssh passphrase, use the following in your .xinitrc:
#!/bin/sh ... SNIP ... xscreensaver& eval $(keychain --eval) exec sh -c \ 'SSH_ASKPASS=/usr/lib/openssh/ssh-askpass-fullscreen ssh-add < /dev/null \ && exec stumpwm'
Replace the 'stumpwm' with the command to launch your window manager or desktop environment.
Requires the 'keychain' and 'ssh-askpass-fullscreen' packages, or you could replace 'eval $(keychain)' with 'eval $(ssh-agent) and replace ssh-askpass-fullscreen with any ssh passphrase asker. The fullscreen version guarantees protection of your desktop, so we prefer that. This also exports your key to all your x apps, so you don't need another keychain manager for ssh. In addition, 'keychain' (as opposed to just ssh-agent) supports gpg passphrase caching, as well, not just the ssh keys.