Difference between revisions of "Samba"

From ArchWiki
Jump to navigation Jump to search
(style, see Help:Style)
Line 256: Line 256:
=== File manager configuration ===
=== File manager configuration ===
==== Nautilus ====
==== Nautilus and Nemo ====
In order to access samba shares through Nautilus, install the {{Pkg|gvfs-smb}} package, available in the [[Official Repositories]].
In order to access samba shares through Nautilus or Nemo, install the {{Pkg|gvfs-smb}} package, available in the [[Official Repositories]].
Press {{ic|Ctrl+l}} and enter {{ic|smb://servername/share}} in the location bar to access your share.
Press {{ic|Ctrl+l}} and enter {{ic|smb://servername/share}} in the location bar to access your share.

Revision as of 04:29, 19 November 2013

zh-CN:Samba zh-TW:Samba Template:Article summary start Template:Article summary text Template:Article summary heading Template:Article summary wiki Template:Article summary wiki Template:Article summary wiki Template:Article summary wiki Template:Article summary wiki Template:Article summary end

Samba is a re-implementation of the SMB/CIFS networking protocol, it facilitates file and printer sharing among Linux and Windows systems as an alternative to NFS. Some users say that Samba is easily configured and that operation is very straight-forward. However, many new users run into problems with its complexity and non-intuitive mechanism. It is strongly suggested that the user stick close to the following directions.

Required packages


To share files with Samba, install samba, from the official repositories.


Only smbclient is required to access files from a Samba/SMB/CIFS server. It is also available from the official repositories.

Server configuration

The Samba server is configured in /etc/samba/smb.conf. Copy the default Samba configuration file to /etc/samba/smb.conf:

# cp /etc/samba/smb.conf.default /etc/samba/smb.conf

Creating a share

Edit /etc/samba/smb.conf, scroll down to the Share Definitions section. The default configuration automatically creates a share for each user's home directory. It also creates a share for printers by default.

There are a number of commented sample configurations included. More information about available options for shared resources can be found in man smb.conf. Here is the on-line version.

On Windows side, be sure to change smb.conf to the Windows Workgroup. (Windows default: WORKGROUP)

Be sure that your machine is not named Localhost, since it will resolve on Windows to

Starting services

Start smbd and nmbd to provide basic file sharing through SMB:

# systemctl start smbd
# systemctl start nmbd

To enable the services on bootup:

# systemctl enable smbd
# systemctl enable nmbd
Note: Or you can enable Samba socket so the daemon is started on the first incoming connection:
systemctl disable smbd.service
systemctl enable smbd.socket

Creating user share path

This marks the named objects for automatic export to the environment of subsequently executed commands:

# export USERSHARES_DIR="/var/lib/samba/usershares"
# export USERSHARES_GROUP="sambashare"

This creates the usershares directory in var/lib/samba:

# mkdir -p ${USERSHARES_DIR}

This makes the group sambashare:

# groupadd ${USERSHARES_GROUP}

This changes the owner of the directory and group you just created to root:


This changes the permissions of the usershares directory so that users in the group sambashare can read, write and execute files:

# chmod 1770 ${USERSHARES_DIR}

Set the following variables in smb.conf configuration file:

  usershare path = /var/lib/samba/usershares
  usershare max shares = 100
  usershare allow guests = yes
  usershare owner only = False

Save the file and then add your user to the group sambashares replacing "your_username" with the name of your user:

# usermod -a -G ${USERSHARES_GROUP} your_username

Restart Samba.

# systemctl restart smbd nmbd

Log out and log back in. You should now be able to configure your samba share using GUI. For example, in Thunar you can right click on any directory and share it on the network. When the error You are not the owner of the folder appears, simply try to reboot the system.

Adding a user

To log into a Samba share, a samba user is needed. The user must already have a Linux user account with the same name on the server, otherwise running the next command will fail:

# pdbedit -a -u user
Note: As of version 3.4.0, smbpasswd is no longer used by default. Existing smbpasswd databases can be converted to the new format

Changing a password

To change a user's password, use smbpasswd:

# smbpasswd username

Client configuration

Shared resources from other computers on the LAN may be accessed and mounted locally by GUI or CLI methods. The graphical manner is limited since most lightweight Desktop Environments do not have a native way to facilitate accessing these shared resources.

There are two parts to share access. First is the underlying file system mechanism, and second is the interface which allows the user to select to mount shared resources. Some environments have the first part built into them.

Manual mounting

Install smbclient from the official repositories. If you want a lighter approach and do not need the ability to list public shares, you need only install cifs-utils to provide /usr/bin/mount.cifs.

To list public shares on a server:

$ smbclient -L hostname -U%

Create a mount point for the share:

# mkdir /mnt/mountpoint

Mount the share using the mount.cifs type. Not all the options listed below are needed or desirable (ie. password).

# mount -t cifs //SERVER/SHARENAME /mnt/MOUNTPOINT -o user=USERNAME,password=PASSWORD,workgroup=WORKGROUP,ip=SERVERIP


The Windows system name.


The shared directory.


The local directory where the share will be mounted.

-o [options]

See man mount.cifs for more information.
  • Abstain from using a trailing /. //SERVER/SHARENAME/ will not work.
  • If your mount does not work stable, stutters or freezes, try to enable different SMB protocol version with vers= option. For example, vers=2.0 for Windows Vista mount.

Add Share to /etc/fstab

The simplest way to add an fstab entry is something like this:


However, storing passwords in a world readable file is not recommended! A safer method would be to use a credentials file. As an example, create a file and chmod 600 filename so only the owning user can read and write to it. It should contain the following information:


and the line in your fstab should look something like this:

//SERVER/SHARENAME /mnt/MOUNTPOINT cifs credentials=/path/to/credentials/sambacreds,workgroup=WORKGROUP,ip=SERVERIP 0 0

If using systemd (modern installations), one can utilize the comment=systemd.automount option, which speeds up service boot by a few seconds. Also, one can map current user and group to make life a bit easier, utilizing uid and gid options (warning: using the uid and gid options may cause input ouput errors in programs that try to fetch data from network drives):

//SERVER/SHARENAME /mnt/MOUNTPOINT cifs credentials=/path/to/smbcredentials,comment=systemd.automount,uid=USERNAME,gid=USERGROUP 0 0
Note: Space in sharename should be replaced by \040 (ASCII code for space in octal). For example, //SERVER/SHARE\ NAME on the command line should be //SERVER/SHARE\040NAME in fstab.

User mounting

//SERVER/SHARENAME /mnt/MOUNTPOINT cifs users,credentials=/path/to/smbcredentials,workgroup=WORKGROUP,ip=SERVERIP 0 0
Note: Note: The option is users (plural). For other filesystem types handled by mount, this option is usually user; sans the "s".

This will allow users to mount it as long as the mount point resides in a directory controllable by the user; i.e. the user's home. For users to be allowed to mount and unmount the Samba shares with mount points that they do not own, use smbnetfs, or grant privileges using sudo.

Automatic mounting

There are several ways to easily browse shared resources:


Install smbnetfs from the official repositories.

Add the following line to /etc/fuse.conf:


and load the fuse kernel module:

# modprobe fuse

If a username and a password are required to access some of the shared folders, edit /etc/smbnetfs/.smb/smbnetfs.conf and uncomment the line starting with "auth":

auth			"hostname" "username" "password"

Make sure to chmod 600 /etc/smbnetfs/.smb/smbnetfs.conf, and any include files for smbnetfs to work correctly.

To mount the network

smbnetfs mount_point

To browse the network


Start and enable the smbnetfs daemon.

If you want to start it at boot, enable it. It will be mounted on /mnt/smbnet/.


Note: Because smbclient 3.2.X is malfunctioning with fusesmb, revert to using older versions if necessary. See the relevant forum topic for details.
  1. Install fusesmbAUR, available in the AUR.
  2. Create a mount point: mkdir /mnt/fusesmb
  3. Load fuse kernel module.
  4. Mount the shares:
    fusesmb -o allow_other /mnt/fusesmb


See Autofs for information on the kernel-based automounter for Linux.

File manager configuration

Nautilus and Nemo

In order to access samba shares through Nautilus or Nemo, install the gvfs-smb package, available in the Official Repositories.

Press Ctrl+l and enter smb://servername/share in the location bar to access your share.

The mounted share is likely to be present at /run/user/your_UID/gvfs in the filesystem.

Thunar and PCManFM

For access using Thunar or PCManFM, install gvfs-smb, available in the official repositories.

Go to smb://servername/share, to access your share.


KDE, has the ability to browse Samba shares built in. Therefore do not need any additional packages. However, for a GUI in the KDE System Settings, install the kdenetwork-filesharing package from the official repositories.

Other graphical environments

There are a number of useful programs, but they may need to have packages created for them. This can be done with the Arch package build system. The good thing about these others is that they do not require a particular environment to be installed to support them, and so they bring along less baggage.

  • pyneighborhood is available in the official repositories.
  • LinNeighborhood, RUmba, xffm-samba plugin for Xffm are not available in the official repositories or the AUR. As they are not officially (or even unofficially supported), they may be obsolete and may not work at all.

See also