Difference between revisions of "Samba"

Revision as of 12:26, 26 May 2013

Template:Article summary start Template:Article summary text Template:Article summary heading Template:Article summary wiki Template:Article summary wiki Template:Article summary end Samba is a re-implementation of the SMB/CIFS networking protocol, it facilitates file and printer sharing among Linux and Windows systems as an alternative to NFS. Some users say that Samba is easily configured and that operation is very straight-forward. However, many new users run into problems with its complexity and non-intuitive mechanism. It is strongly suggested that the user stick close to the following directions.

Required packages

Server

To share files with Samba, install samba, from the Official Repositories.

Client

Only smbclient is required to access files from a Samba/SMB/CIFS server. It is also available from the Official Repositories.

Server configuration

The /etc/samba/smb.conf file must be created before starting the service. Once that is set up, users may opt for using an advanced configuration interface like SWAT.

As root, copy the default Samba configuration file to /etc/samba/smb.conf:

# cp /etc/samba/smb.conf.default /etc/samba/smb.conf

Creating a share

Edit /etc/samba/smb.conf, scroll down to the Share Definitions section. The default configuration automatically creates a share for each user's home directory. It also creates a share for printers by default.

There are a number of commented sample configurations included. More information about available options for shared resources can be found in man smb.conf. Here is the on-line version.

Creating user share path

This marks the named objects for automatic export to the environment of subsequently executed commands:

# export USERSHARES_DIR="/var/lib/samba/usershares"
# export USERSHARES_GROUP="sambashare"

This creates the usershares directory in var/lib/samba:

# mkdir -p ${USERSHARES_DIR}

This makes the group sambashare:

# groupadd ${USERSHARES_GROUP}

This changes the owner of the directory and group you just created to root:

# chown root:${USERSHARES_GROUP} ${USERSHARES_DIR}

This changes the permissions of the usershares directory so that users in the group sambashare can read, write and execute files:

# chmod 01770 ${USERSHARES_DIR}

Set the following variable in smb.conf configuration file:

/etc/samba/smb.conf

...
 [global]
   usershare path = /var/lib/samba/usershares
   usershare max shares = 100
   usershare allow guests = yes
   usershare owner only = False
 ...

Save the file and then add your user to the group sambashares replacing "your_username" with the name of your user:

# usermod -a -G ${USERSHARES_GROUP} your_username

Restart Samba

Log out and log back in. You should now be able to configure your samba share using GUI. For example, in Thunar you can right click on any directory and share it on the network. When the error You are not the owner of the folder appears, simply try to reboot the system.

Adding a user

To log into a Samba share, a samba user is needed. The user must already have a Linux user account with the same name on the server, otherwise running the next command will fail:

# pdbedit -a -u <user>

Note: As of version 3.4.0, smbpasswd is no longer used by default. Existing smbpasswd databases can be converted to the new format

Web-based configuration (SWAT)

SWAT (Samba Web Administration Tool) is a facility that is part of the Samba suite. Whether or not to use this tool remains a matter of personal preference. It does allow for quick configuration and has context-sensitive help for each smb.conf parameter. SWAT also provides an interface for monitoring of current state of connection(s), and allows network-wide MS Windows network password management.

Warning: Before using SWAT, be warned that SWAT will completely replace /etc/samba/smb.conf with a fully optimized file that has been stripped of all comments, and only non-default settings will be written to the file.

To use SWAT, two systemd unit files come with the samba package that allow for socket activation. The SWAT service will be called automatically should a user call on the configured socket. In this case, a TCP connection on a specific port.

First, review the socket configuration:

/usr/lib/systemd/system/swat.socket

[Unit]
Description=SWAT Samba Web Admin Tool

[Socket]
ListenStream=127.0.0.1:901
Accept=true

[Install]
WantedBy=sockets.target

Note: By default SWAT will only be available from the localhost, the system the SWAT service is installed on. If SWAT should be available for external connections, copy the unit to /etc/systemd/system/swat.socket, and replace 127.0.0.1 with your system's LAN ip. i.e. 192.168.1.80:901.

When satisfied with the configuration, start the socket:

# systemctl start swat.socket

Or, should you want to enable SWAT during boot, enable:

# systemctl enable swat.socket

The web interface can now be accessed on port 901 by default: http://localhost:901/

Note: An all-encompasing Webmin tool is also available, and the SWAT module can be loaded there.

Starting the service

Start/enable Samba via the smbd and nmbd at boot:

systemctl enable smbd.service
systemctl enable nmbd.service

Run them right now as well (otherwise you'd have to reboot):

systemctl start smbd.service
systemctl start nmbd.service

Client configuration

Shared resources from other computers on the LAN may be accessed and mounted locally by GUI or CLI methods. The graphical manner is limited since most lightweight Desktop Environments do not have a native way to facilitate accessing these shared resources.

There are two parts to share access. First is the underlying file system mechanism, and second is the interface which allows the user to select to mount shared resources. Some environments have the first part built into them.

Manual mounting

Install smbclient from the Official Repositories.

To list public shares on a server:

$ smbclient -L <hostname> -U%

Create a mount point for the share:

# mkdir /mnt/MOUNTPOINT

Mount the share using the mount.cifs type. Not all the options listed below are needed or desirable (ie. password).

# mount -t cifs //SERVER/SHARENAME /mnt/MOUNTPOINT -o user=USERNAME,password=PASSWORD,workgroup=WORKGROUP,ip=SERVERIP

SERVER

The Windows system name.

SHARENAME

The shared directory.

MOUNTPOINT

The local directory where the share will be mounted.

-o [options]

See man mount.cifs for more information:

Note: Abstain from using a trailing /. //SERVER/SHARENAME/ will not work.

Add Share to /etc/fstab

The simplest way to add an fstab entry is something like this:

/etc/fstab

//SERVER/SHARENAME /mnt/MOUNTPOINT cifs noauto,username=USER,password=PASSWORD,workgroup=WORKGROUP,ip=SERVERIP 0 0

However, storing passwords in a world readable file is not recommended! A safer method would be to use a credentials file. As an example, create a file and chmod 600 <filename> so only the owning user can read and write to it. It should contain the following information:

/path/to/credentials/sambacreds

username=USERNAME
password=PASSWORD

and the line in your fstab should look something like this:

/etc/fstab

//SERVER/SHARENAME /mnt/MOUNTPOINT cifs noauto,username=USER,credentials=/path/to/credentials/sambacreds,workgroup=WORKGROUP,ip=SERVERIP 0 0

If using systemd (modern installations), one can utilize the comment=systemd.automount option, which speeds up service boot by a few seconds. Also, one can map current user and group to make life a bit easier, utilizing uid and gid options (warning: using the uid and gid options may cause input ouput errors in programs that try to fetch data from network drives):

/etc/fstab

//SERVER/SHARENAME /mnt/MOUNTPOINT cifs noauto,credentials=/path/to/smbcredentials,comment=systemd.automount,uid=USERNAME,gid=USERGROUP 0 0

User mounting

/etc/fstab

//SERVER/SHARENAME /mnt/MOUNTPOINT cifs users,noauto,credentials=/path/to/smbcredentials,workgroup=WORKGROUP,ip=SERVERIP 0 0

Note: Note: The option is users (plural). For other filesystem types handled by mount, this option is usually user; sans the "s".

This will allow users to mount it as long as the mount point resides in a directory controllable by the user; i.e. the user's home. For users to be allowed to mount and unmount the Samba shares with mount points that they do not own, use smbnetfs, or grant privileges using sudo.

Automatic Mounting

There are several ways to easily browse shared resources:

smbnetfs

Install smbnetfs, from the Official Repositories.

Add the following line to /etc/fuse.conf:

user_allow_other

and load the fuse kernel module:

# modprobe fuse

If a username and a password are required to access some of the shared folders, edit /etc/smbnetfs/.smb/smbnetfs.conf and uncomment the line starting with "auth":

/etc/smbnetfs/.smb/smbnetfs.conf

auth			"hostname" "username" "password"

Make sure to chmod 600 /etc/smbnetfs/.smb/smbnetfs.conf, and any include files for smbnetfs to work correctly.

Daemon

Start and enable the smbnetfs daemon.

fusesmb

Note: Because smbclient 3.2.X is malfunctioning with fusesmb, revert to using older versions if necessary. See the relevant forum topic for details.

Install fusesmb^AUR, available in the Arch User Repository.
Create a mount point: # mkdir /mnt/fusesmb
Load fuse kernel module.
Mount the shares:
```
# fusesmb -o allow_other /mnt/fusesmb
```

autofs

See Autofs for information on the kernel-based automounter for Linux.

File Manager Configuration

Nautilus

In order to access samba shares through Nautilus, install the gvfs-smb package, available in the Official Repositories.

Press Template:Keypress and enter smb://servername/share in the location bar to access your share.

The mounted share is likely to be present at /run/user/<your UID>/gvfs in the filesystem.

Thunar and pcmanfm

For access using Thunar or pcmanfm, install gvfs-smb, available in the Official Repositories.

Go to smb://servername/share, to access your share.

KDE

KDE, has the ability to browse Samba shares built in. Therefore do not need any additional packages. However, for a GUI in the KDE System Settings, install the kdenetwork-filesharing package from the Official Repositories

Other Graphical Environments

There are a number of useful programs, but they may need to have packages created for them. This can be done with the Arch package build system. The good thing about these others is that they do not require a particular environment to be installed to support them, and so they bring along less baggage.

pyneighborhood is available in the Official Repositories.
LinNeighborhood, RUmba, xffm-samba plugin for Xffm are not available in the official repositories or the AUR. As they are not officially (or even unofficially supported), they may be obsolete and may not work at all.

@@ Line 78: / Line 78: @@
 {{Warning|Before using SWAT, be warned that SWAT will completely replace {{ic|/etc/samba/smb.conf}} with a fully optimized file that has been stripped of all comments, and only non-default settings will be written to the file.}}
-To use SWAT, first install {{Pkg|xinetd}}, available in the [[Official Repositories]].
+To use SWAT, two [[systemd]] unit files come with the samba package that allow for socket activation. The SWAT service will be called automatically should a user call on the configured socket. In this case, a TCP connection on a specific port.
-Edit {{ic|/etc/xinetd.d/swat}}. To enable SWAT, change the {{ic|1=disable = yes}} line to {{ic|1=disable = no}}.
+First, review the socket configuration:
+{{hc|/usr/lib/systemd/system/swat.socket|<nowiki>
+[Unit]
+Description=SWAT Samba Web Admin Tool
-{{hc|/etc/xinetd.d/swat|<nowiki>
+[Socket]
-service swat
+ListenStream=127.0.0.1:901
-{
+Accept=true
-        type                    = UNLISTED
-        protocol                = tcp
-        port                    = 901
-        socket_type             = stream
-        wait                    = no
-        user                    = root
-        server                  = /usr/sbin/swat
-        log_on_success          += HOST DURATION
-        log_on_failure          += HOST
-        disable                 = no
-}</nowiki>}}
-Alternatively, add an entry for swat to {{ic|/etc/services}} and omit the first 3 lines of the configuration.
+[Install]
+WantedBy=sockets.target
+</nowiki>}}
-Then start the ''xinetd'' daemon using [[systemd]].
+{{Note|By default SWAT will only be available from the localhost, the system the SWAT service is installed on. If SWAT should be available for external connections, copy the unit to {{ic|<nowiki>/etc/systemd/system/swat.socket</nowiki>}}, and replace 127.0.0.1 with your system's LAN ip. i.e. {{ic|<nowiki>192.168.1.80:901</nowiki>}}.}}
-The web interface can be accessed on port 901 by default:
+When satisfied with the configuration, start the socket:
+ # systemctl start swat.socket
+Or, should you want to enable SWAT during boot, enable:
+ # systemctl enable swat.socket
+The web interface can now be accessed on port 901 by default:
 {{ic|http://localhost:901/}}
@@ Line 107: / Line 107: @@
 === Starting the service ===
-Start/enable Samba via the '''smbd''' and '''nmbd''' at boot:
+Start/enable Samba via the [http://www.samba.org/samba/docs/man/manpages-3/smbd.8.html smbd] and [http://www.samba.org/samba/docs/man/manpages-3/nmbd.8.html nmbd] at boot:
   systemctl enable smbd.service
   systemctl enable nmbd.service