Difference between revisions of "Samba"

From ArchWiki
Jump to navigation Jump to search
m (→‎Installation: changed latter to former, as I assume it is talking about FAM, not Gamin)
(The comment line is to long for a laptop screen resolution)
Line 222: Line 222:
  netbios name = PC_NAME
  netbios name = PC_NAME
  security = share
  security = share
  ; the line below is important! If you have permission issues make sure the user here is the same as the user of the folder you want to share
  ; the line below is important! If you have permission issues make sure the user here is the same as the user of the  
; folder you want to share
  guest account = mark
  guest account = mark
  username map = /etc/samba/smbusers
  username map = /etc/samba/smbusers

Revision as of 00:10, 19 January 2010

Template:Article summary start Template:Article summary text Template:Article summary heading Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:Article summary heading Template:Article summary wiki Template:Article summary wiki Template:Article summary end

Samba is a re-implementation of the SMB/CIFS networking protocol, it facilitates file and printer sharing among Linux and Windows systems as an alternative to NFS. Samba is easily configured and operation is very straight-forward.


Installing only the client program is sufficient for systems that are not meant to share files, only access them:

# pacman -S smbclient

In order to make shares available to clients, install the Samba server package:

# pacman -S samba

A daemon is installed with the server and it must be started for Samba to begin working. Samba typically uses FAM to monitor the file-system for changes, yet Gamin has almost completely replaced FAM as of recent, mainly because the former is poorly maintained and generally an inferior, unpopular choice.

To install Gamin:

# pacman -S gamin


The Template:Filename file must be created before starting the daemons. Once that is setup, users may opt for using an advanced configuration interface like SWAT.


As root, copy the default Samba configuration file to Template:Filename:

# cp /etc/samba/smb.conf.default /etc/samba/smb.conf

Open Template:Filename and edit it to suit your needs. The default file creates a share for each user's home directory. It also creates a share for printers.

Starting and automating the daemons

If using FAM, start the Template:Codeline daemon before Template:Codeline. Gamin does not need a daemon since it automatically starts when needed.

Without rebooting, FAM and Samba can be started with the commands:

# /etc/rc.d/fam start
# /etc/rc.d/samba start

Add Template:Codeline and Template:Codeline to the DAEMONS line in Template:Filename to automatically start the daemons at boot.

SWAT: Samba web administration tool

SWAT is a facility that is part of the Samba suite. The main executable is called swat and is invoked by the internetworking super daemon, inetd.

There are many and varied opinions regarding the usefulness of SWAT. No matter how hard one tries to produce the perfect configuration tool, it remains an object of personal taste. However, SWAT is a very useful tool that allows Web-based configuration of Samba. It has a wizard that may help to get Samba configured quickly, it has context-sensitive help on each Template:Filename parameter, it provides for monitoring of current state of connection information, and it allows network-wide MS Windows network password management.

Warning: Before using SWAT, please be warned SWAT will completely replace your Template:Filename with a fully optimized file that has been stripped of all comments you might have placed there, and only non-default settings will be written to the file.

To use SWAT, first install xinetd:

# pacman -Sy xinetd

Edit Template:Filename using your favorite text editor. To enable SWAT, change the Template:Codeline line to Template:Codeline.

Additionally, edit Template:Filename if remote administration is needed.

The web interface can be accessed on port 901 by default,

Note: If you have problems with these directions, you can use the more all-encompasing Webmin tool instead, and easily load the SWAT module there.

Adding users

To log into a Samba share you'll need to add a user:

# smbpasswd -a <user>

The user must already have a account on the server. If the user does not exist you will receive the error:

Failed to modify password entry for user "<user>"

You can add a new user to the Linux host with adduser. This article does not cover adding users to Windows systems.

Accessing Samba shares

KDE and Gnome have the ability to browse Samba shares. You therefore do not need any additional packages if using either of these DEs. If however you plan to use the share solely from a shell, you will need an additional package.

Accessing a Samba share from Gnome or KDE

From a Nautilus/Dolphin/Konqueror window, hit Template:Keypress+Template:Keypress or go to the "Go" menu and select "Location..." -- both actions will allow you to type in the "Go to:" blank. Enter:

Note: If you do not have your servername in your Template:Filename, you must use the IP Address of the server in place of the servername.

For a GUI in the KDE System Settings you have to install the kdenetwork-filesharing package from [extra].

Accessing a Samba share from the shell

Shares may be accessed by using an automatic mounter or by using a manual method.

Automatic share mounting

There are several alternatives for easy share browsing.


1. Install Template:Package Official:

# pacman -S smbnetfs

2. Add the following line to Template:Filename:


3. Load the Template:Codeline kernel module:

# modprobe fuse

4. Start the Template:Codeline daemon:

# /etc/rc.d/smbnetfs start

All shares in the network are now automatically mounted under Template:Filename.

Add the following to Template:Filename to access the shares at boot:

MODULES=(... fuse ...)
DAEMONS=(... smbnetfs ...)
Note: Because Template:Codeline is malfunctioning with Template:Codeline, revert to using older versions if necessary. See the relevant forum topic for details.

1. Install the Template:Package AUR package from the AUR using yaourt or other AUR Helpers:

$ yaourt -S fusesmb

2. Create a mount point:

# mkdir /mnt/fusesmb

3. Load Template:Codeline module:

# modprobe fuse

4. Mount the shares:

# fusesmb -o allow_other /mnt/fusesmb

For mounting shares at boot, add the command above to Template:Filename and add Template:Codeline module to Template:Filename:

MODULES=(... fuse ...)

See Autofs for information on the kernel-based automounter for Linux.

Manual share mounting

1. Use smbclient to browse shares from the shell. To list any public shares on a server:

$ smbclient -L <hostname> -U%

2. Create the mount point for the share:

# mkdir /mnt/MOUNTPOINT

3. Mount the share using Template:Codeline. Keep in mind that not all options may be needed nor desirable, such as Template:Codeline:

The Windows system's name
The shared directory
The local directory where the share will be mounted to
Specifies options for Template:Codeline
Username used to mount the share
The shared directory's password
Used to specify the workgroup
The IP address of the server -- if the system is unable to find the Windows computer by name (DNS, WINS, hosts entry, etc.)
Note: Abstain from using trailing directory (/) characters. Using Template:Filename will not work.

4. To unmount the share, use:

# umount /mnt/MOUNTPOINT
Adding the share to Template:Filename

Add the following to Template:Filename for easy mounting:

//SERVER/SHARENAME /mnt/MOUNTPOINT cifs noauto,noatime,username=USER,password=PASSWORD,workgroup=WORKGROUP 0 0

The Template:Codeline option disables mounting it automatically at boot and Template:Codeline increases performance by skipping inode access times.

After adding the previous line, the syntax to mount files becomes simpler:

# mount /mnt/MOUNTPOINT

If adding a Samba share to Template:Filename, the Template:Codeline daemon should also be added to Template:Filename, somewhere after the network daemon. The Template:Codeline daemon will mount network partitions at boot and, more importantly, unmount network partitions at shutdown. Even if using the Template:Codeline option in Template:Filename, the Template:Codeline daemon should be used. Without it any network share that is mounted when shutting down will cause the Template:Codeline daemon to wait for the connection to time out, considerably extending poweroff time.

Allowing users to mount

Before enabling access to the mount commands, Template:Filename needs to be modified. Add the Template:Codeline options to the entry in Template:Filename:

//SERVER/SHARENAME /path/to/SHAREMOUNT cifs users,noauto,noatime,username=USER,password=PASSWORD,workgroup=WORKGROUP 0 0
Note: The option is Template:Codeline (plural). For other filesystem types handled by mount, this option is usually user; sans the "s".

This will allow users to mount it aslong as the mount point resides in a directory controllable by the user; i.e. the user's home. For users to be allowed to mount and unmount the Samba shares with mount points that they do not own, use #smbnetfs, or grant privileges using sudo.

Tips and tricks

Share files for your LAN without user and password

Edit Template:Filename and change the following line:

security = user


security = share

If you want to restrict the shares data to a specific interface replace:

;   interfaces =


interfaces = lo eth0
bind interfaces only = true

(changing eth0 to the local network you want share with.)

If you want to edit the account that access the shares, edit the following line:

;   guest account = nobody

The last step is to create share directory (for write access make writable = yes):

[Public Share]
path = /path/to/public/share
available = yes
browsable = yes
public = yes
writable = no

Sample configuration file

The configuration that worked for one user:

workgroup = WORKGROUP
server string = Samba Server
netbios name = PC_NAME
security = share
; the line below is important! If you have permission issues make sure the user here is the same as the user of the 
; folder you want to share
guest account = mark
username map = /etc/samba/smbusers
name resolve order = hosts wins bcast
wins support = no
[public] comment = Public Share path = /path/to/public/share available = yes browsable = yes public = yes writable = no

Discovering network shares

If nothing is known about other systems on the local network, and automated tools such as #smbnetfs are not available, the following methods allow one to manually probe for Samba shares.

1. First, install Template:Package Official and Template:Package Official using pacman:

# pacman -S nmap smbclient

2. Template:Codeline checks which ports are open:

# nmap -sT 192.168.1.*

In this case, a scan on the 192.168.1.* IP address range has been performed, resulting in: Template:Command

The first result is another system; the second happens to be the client from where this scan was performed.

3. Now that systems with port 139 open are revealed, use Template:Codeline to check for NetBIOS names: Template:Command

Regardless of the output, look for <20>, which shows the host with open services.

4. Use Template:Codeline to list which services are shared on PUTER. If prompted for a password, pressing enter should still display the list: Template:Command

This shows which folders are shared and can be mounted locally. See: #Accessing Samba shares


Trouble accessing a password-protected share from Windows

If you are having trouble accessing a password protected share from Windows, try adding this to Template:Filename:[1]

# lanman fix
client lanman auth = yes
client ntlmv2 auth = no

Getting a dialog box up takes a long time

I had a problem that it took ~30 seconds to get a password dialog box up when trying to connect from both Windows XP/Windows 7. Analyzing the error.log on the server I saw:

[2009/11/11 06:20:12,  0] printing/print_cups.c:cups_connect(103)
Unable to connect to CUPS server localhost:631 - Interrupted system call

I don't have any printer connected to this server, so I added this to the global section:

load printers = no
printing = bsd
disable spoolss = yes
printcap name = /dev/null

Not sure if all of them are necessary, but at least it works now.

Changes in Samba version 3.4.0

Major enhancements in Samba 3.4.0 include:

The default passdb backend has been changed to 'tdbsam'! That breaks existing setups using the 'smbpasswd' backend without explicit declaration!

If you would like to stick to the 'smbpasswd' backend try changing this in Template:Filename:

passdb backend = smbpasswd

or convert your smbpasswd entries using:

sudo pdbedit -i smbpasswd -e tdbsam

Error: Value too large for defined data type

With some applications you could get this error whith every attempt to open a file mounted in smbfs/cifs:

 Value too large for defined data type

The solution[2] is to add this options to your smbfs/cifs mount options (in /etc/fstab for example):


It works on Arch Linux up-to-date (2009-12-02)