Difference between revisions of "SANE (简体中文)"

From ArchWiki
Jump to: navigation, search
(Sync to latest English version.)
(For Brother hardware)
 
(6 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
[[Category:Imaging (简体中文)]]
 
[[Category:Imaging (简体中文)]]
[[en:Sane]]
+
[[en:SANE]]
[[es:Sane]]
+
[[es:SANE]]
 
[[fr:Sane]]
 
[[fr:Sane]]
 +
[[it:SANE]]
 +
[[ja:Sane]]
 
{{Translateme (简体中文)}}
 
{{Translateme (简体中文)}}
{{Article summary start|Summary}}
+
{{Related articles start (简体中文)}}
{{Article summary text|Installing and configuring Sane}}
+
{{Related|Scan print and save Script}}
{{Article summary heading|Related}}
+
{{Related articles end}}
{{Article summary wiki|Scan print and save Script}}
+
{{Article summary end}}
+
 
+
 
Sane provides a library and a command-line tool to use scanners under GNU/Linux.
 
Sane provides a library and a command-line tool to use scanners under GNU/Linux.
 
[http://www.sane-project.org/sane-supported-devices.html Here] you can check if sane supports your scanner.
 
[http://www.sane-project.org/sane-supported-devices.html Here] you can check if sane supports your scanner.
Line 37: Line 36:
 
=== For Brother hardware ===
 
=== For Brother hardware ===
 
In order to install a Brother Scanner or Printer/Scanner Combo you need the right driver (which can be found in the AUR).
 
In order to install a Brother Scanner or Printer/Scanner Combo you need the right driver (which can be found in the AUR).
There are only four drivers to choose from (brscan1-4).  In order to find the right one you should search for your model at the [http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/download_scn.html brother linux scanner page].
+
There are only four drivers to choose from (brscan1-4).  In order to find the right one you should search for your model at the [http://support.brother.com/g/s/id/linux/en/download_scn.html brother linux scanner page].
  
 
After you installed the driver you need to run
 
After you installed the driver you need to run
Line 52: Line 51:
 
For Wi-Fi and/or network scanners, you can use "Image Scan! for Linux".
 
For Wi-Fi and/or network scanners, you can use "Image Scan! for Linux".
  
Install {{AUR|iscan}} and {{AUR|iscan-plugin-network}} from the [[AUR]], then update {{ic|/etc/sane.d/epkowa.conf}} and add the line:
+
Install {{Pkg|iscan}} and {{AUR|iscan-plugin-network}} from the [[AUR]], then update {{ic|/etc/sane.d/epkowa.conf}} and add the line:
 
  net {IP_OF_SCANNER}
 
  net {IP_OF_SCANNER}
  
Line 91: Line 90:
  
 
==Network scanning==
 
==Network scanning==
==== Sharing Your Scanner Over a Network ====
+
=== Sharing Your Scanner Over a Network ===
  
 
You can share your scanner with other hosts on your network who use sane, xsane or xsane-enabled Gimp. To set up the server, first indicate which hosts on your network are allowed access.
 
You can share your scanner with other hosts on your network who use sane, xsane or xsane-enabled Gimp. To set up the server, first indicate which hosts on your network are allowed access.
Line 123: Line 122:
 
Your scanner can now be used by other workstations, across your local area network.
 
Your scanner can now be used by other workstations, across your local area network.
  
==== Accessing Your Scanner from a Remote Workstation ====
+
=== Accessing Your Scanner from a Remote Workstation ===
 
You can access your network-enabled scanner from a remote Arch Linux workstation.
 
You can access your network-enabled scanner from a remote Arch Linux workstation.
  
Line 159: Line 158:
  
 
==== Multiple backends claim scanner ====
 
==== Multiple backends claim scanner ====
It may happen, that multiple backends support (or pretend to support) your scanner, and sane chooses one that doesn't do after all (the scanner won't be displayed by scanimage -L then). This has happend with older Epson scanners and the <code>epson2</code> resp. <code>epson</code> backends. In this case, the solution is to comment out the unwanted backend in <code>/etc/sane.d/dll.conf</code>. In the Epson case, that would be to change
+
It may happen, that multiple backends support (or pretend to support) your scanner, and sane chooses one that does not do after all (the scanner will not be displayed by scanimage -L then). This has happend with older Epson scanners and the {{ic|epson2}} resp. {{ic|epson}} backends. In this case, the solution is to comment out the unwanted backend in {{ic|/etc/sane.d/dll.conf}}. In the Epson case, that would be to change
  
 
   epson2
 
   epson2
Line 175: Line 174:
  
 
===Permission problem===
 
===Permission problem===
If you see your scanner only when running {{Ic|lsusb}} (as root), you might get it working by adding your user to {{Ic|scanner}} and/or {{Ic|lp}} group.
+
You can try to change permissions of usb device but this is not recommended, a better solution is to fix the Udev rules so that your scanner is recognized.
# gpasswd -a username scanner
+
# gpasswd -a username lp
+
This is reported to work on HP all-in-one models (e.g., PSC 1315 and PSC 2355).
+
 
+
You can also try to change permissions of usb device but this is not recommended, a better solution is to fix the Udev rules so that your scanner is recognized.
+
  
 
Example:
 
Example:
Line 227: Line 221:
 
Change the firmware path line with yours. :
 
Change the firmware path line with yours. :
  
<pre>
+
{{bc|
 
   # Change to the fully qualified filename of your firmware file, if
 
   # Change to the fully qualified filename of your firmware file, if
 
   # firmware upload is needed by the scanner
 
   # firmware upload is needed by the scanner
 
   firmware /mnt/mydata/Backups/firmware/esfw3e.bin
 
   firmware /mnt/mydata/Backups/firmware/esfw3e.bin
</pre>
+
}}
  
 
And add the following line in the end or anywhere you like
 
And add the following line in the end or anywhere you like
  
<pre>
+
{{bc|
 
   # Epson Perfection 1270
 
   # Epson Perfection 1270
 
   usb 0x04b8 0x0120
 
   usb 0x04b8 0x0120
</pre>
+
}}
  
 
You can get such code information (''usb 0x04b8 0x0120'') by "sane-find-scanner" command.
 
You can get such code information (''usb 0x04b8 0x0120'') by "sane-find-scanner" command.

Latest revision as of 20:16, 3 April 2016

Tango-preferences-desktop-locale.png本页面需要更新翻译,内容可能已经与英文脱节。要贡献翻译,请访问简体中文翻译组Tango-preferences-desktop-locale.png

附注: please use the first argument of the template to provide more detailed indications.

Sane provides a library and a command-line tool to use scanners under GNU/Linux. Here you can check if sane supports your scanner.

Installation

Install sane from the official repositories.

Configuration

Now you can try to see if sane recognizes your scanner

$ scanimage -L

If that fails, check that your scanner is plugged into the computer. You also might have to unplug/plug your scanner for /etc/udev/rules.d/sane.rules to recognize your scanner.

Now you can see if it actually works

$ scanimage --format=tiff > test.tiff

For HP hardware

For HP hardware you may also need to install hplip from the official repositories and/or hpojAUR from the AUR.

  • Uncomment or add hpaio and hpoj to a new line in /etc/sane.d/dll.conf.
  • Running hp-setup as root may help you add your device.
  • hp-plugin is the 'HPLIP Plugin Download and Install Utility'.
  • hp-scan is the 'HPLIP Scan Utility'.

For Hewlett-Packard OfficeJet, PSC, LaserJet, and PhotoSmart printer multi-function peripherals, run ptal-init setup as root and follow instructions:

# ptal-init setup

Then start the ptal-init daemon.

For Brother hardware

In order to install a Brother Scanner or Printer/Scanner Combo you need the right driver (which can be found in the AUR). There are only four drivers to choose from (brscan1-4). In order to find the right one you should search for your model at the brother linux scanner page.

After you installed the driver you need to run

# /usr/local/Brother/sane/setupSaneScan1 -i

so the drivers/scanner are recognized by sane.

For network scanners, Brother provides a configuration tool:

$ brsaneconfig2 -a name=<ScannerName> model=<ScannerModel> ip=<ScannerIP>

Example:

$ brsaneconfig2 -a name=SCANNER_DCP770CW model=DCP-770CW ip=192.168.0.110

For Epson hardware

For Wi-Fi and/or network scanners, you can use "Image Scan! for Linux".

Install iscan and iscan-plugin-networkAUR from the AUR, then update /etc/sane.d/epkowa.conf and add the line:

net {IP_OF_SCANNER}

For Samsung hardware

For some Samsung MFP printers you may need to edit /etc/sane.d/xerox_mfp.conf.

example entry:

#Samsung SCX-3200
usb 0x04e8 0x3441

Change the printer model as needed. You can get the ipVendor and idProduct code with lsusb. See this thread.

For plustek scanners

Some plustek scanners (noticeably Canoscan ones), require a lock directory. Make sure that /var/lock/sane directory exists, that its permissions are 660, and that it is owned by <user>:scanner. If the directory permissions are wrong, only root will be able to use the scanner. Seems (at least on x86-64) that some programs using libusb (noticeably xsane and kooka) need scanner group rw permissions also for accessing /proc/bus/usb to work for a normal user.

Firmware

Note: This section is only needed if you need to upload firmware to your scanner.

Firmwares usually have the .bin extension.

Firstly you need to put the firmware someplace safe, it is recommended to put it in a subdirectory of /usr/share/sane.

Then you need to tell sane where the firmware is:

  • Find the name of the backend for your scanner from the sane supported devices list.
  • Open the file /etc/sane.d/<backend-name>.conf.
  • Make sure the firmware entry is uncommented and let the file-path point to where you put the firmware file for your scanner. Be sure that members of the group scanner can access the /etc/sane.d/<backend-name>.conf file.

If the backend of your scanner is not part of the sane package (such as hpaio.conf which is part of hplip), you need to uncomment the relevant entry in /etc/sane.d/dll.d/hplip.

Install a frontend

XSane provides a GTK-based frontend to Sane. It is available in the extra repository.

# pacman -S xsane
Note: Scanning directly to pdf using Xsane in 16bit color depth mode is known to produces corrupted files. 8bit mode should work.

Other frontends exist, to find them you can:

  • use pacman -Ss to search for keywords such as "sane" or "scanner"
  • see the list of frontends on the sane-project website

Network scanning

Sharing Your Scanner Over a Network

You can share your scanner with other hosts on your network who use sane, xsane or xsane-enabled Gimp. To set up the server, first indicate which hosts on your network are allowed access.

Change the /etc/sane.d/saned.conf file to your liking, for example:

# required
localhost
# allow local subnet
192.168.0.0/24

Ensure xinetd is installed:

# pacman -S xinetd

Next, make sure the a file called /etc/xinetd.d/sane exists and disabled is set to no:

service sane-port
{
   port        = 6566
   socket_type = stream
   wait        = no
   user        = root
   group       = scanner
   server      = /usr/sbin/saned
   disable     = no
}

Add the following line to /etc/services:

sane-port 6566/tcp

Start the xinetd daemon.

Your scanner can now be used by other workstations, across your local area network.

Accessing Your Scanner from a Remote Workstation

You can access your network-enabled scanner from a remote Arch Linux workstation.

To set up your workstation, begin by installing xsane:

# pacman -S xsane

Next, specify the server's host name or IP address in the /etc/sane.d/net.conf file:

# static IP address
192.168.0.1
# or host name
stratus

Now test your workstation's connection, from a non-root login prompt:

$ xsane

or

$ scanimage -L

After a short while, xsane should find your remote scanner and present you with the usual windows, ready for network scanning delight!

For HP All in one network printer/scanner/fax you need to configure it via:

$ hp-setup <printer ip>

Troubleshooting

Invalid argument

If you get an "Invalid argument" error with xsane or another sane front-end, this could be caused by one of the following reasons:

Missing firmware file

No firmware file was provided for the used scanner (see above for details).

Wrong firmware file permissions

The permissions for the used firmware file are wrong. Correct them using

# chown root:scanner /usr/share/sane/SCANNER_MODEL/FIRMWARE_FILE
# chmod ug+r /usr/share/sane/SCANNER_MODEL/FIRMWARE_FILE

Multiple backends claim scanner

It may happen, that multiple backends support (or pretend to support) your scanner, and sane chooses one that does not do after all (the scanner will not be displayed by scanimage -L then). This has happend with older Epson scanners and the epson2 resp. epson backends. In this case, the solution is to comment out the unwanted backend in /etc/sane.d/dll.conf. In the Epson case, that would be to change

 epson2
 #epson

to

 #epson2
 epson

Slow startup

If you encounter slow startup issue (e.g. xsane or scanimage -L take a lot to find scanner) it may be that more than one driver supporting it is available.

Have a look at /etc/sane.d/dll.conf and try commenting out one (e.g. you may have epson, epson2 and epkowa enabled at the same time, try leaving only epson or epkowa uncommented)

Permission problem

You can try to change permissions of usb device but this is not recommended, a better solution is to fix the Udev rules so that your scanner is recognized.

Example:

First, as root, check connected usb devices with lsusb:

#Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
#Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
#Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
#Bus 003 Device 003: ID 04d9:1603 Holtek Semiconductor, Inc. 
#Bus 003 Device 002: ID 04fc:0538 Sunplus Technology Co., Ltd 
#Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
#Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
#Bus 001 Device 006: ID 03f0:2504 Hewlett-Packard 
#Bus 001 Device 002: ID 046d:0802 Logitech, Inc. Webcam C200
#Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

In our example we see scanner - 'Bus 001 Device 006: ID 03f0:2504 Hewlett-Packard'

Now edit /lib/udev/rules.d/53-sane.rules and look for the first part of the ID number found previously and check if there is a line that also reports the second part of the number (model numer), in this example 2504. If not found change or copy a line and enter the idVendor and idProduct of your scanner, in this example it would be:

# Hewlett-Packard ScanJet 4100C
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="2504", MODE="0664", GROUP="scanner",
  ENV{libsane_matched}="yes"

Save the file, plug out and back in your scanner and the file permissions should be now correct.

Another tip, is that you can add your device (scanner) in backend file:

Add 'usb 0x03f0 0x2504' to /etc/sane.d/hp4200.conf so it looks like this:

#
# Configuration file for the hp4200 backend
#
#
# HP4200
#usb 0x03f0 0x0105
usb 0x03f0 0x2504

Epson Perfection 1270

For Epson Perfection 1270, you also need a firmware named esfw3e.bin. It can be obtained by installing the Windows driver.

Modify configuration file of snapscan backend:

vi /etc/sane.d/snapscan.conf 

Change the firmware path line with yours. :

   # Change to the fully qualified filename of your firmware file, if
   # firmware upload is needed by the scanner
   firmware /mnt/mydata/Backups/firmware/esfw3e.bin

And add the following line in the end or anywhere you like

  # Epson Perfection 1270
  usb 0x04b8 0x0120

You can get such code information (usb 0x04b8 0x0120) by "sane-find-scanner" command.

Also add such information lines in your libsane.usermap file to setup your privilage, like:

vi /etc/hotplug/usb/libsane.usermap
 
 #Epson Perfection 1270
 libusbscanner 0x0003 0x04b8 0x0120 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000

Replug scanner, you have a working Epson Perfection 1270 now.

NOTE: I can scan image if I define the X and Y value, but without that error meassage occors like: "scanimage: sane_start: Error during device I/O", if anyone know why, please complete the section. ".