Difference between revisions of "Virtual user mail system"

From ArchWiki
Jump to: navigation, search
Line 84: Line 84:
  smtpd_tls_loglevel = 1
  smtpd_tls_loglevel = 1
{{Warning|{{ic|<nowiki>relay_domains = *</nowiki>}} might me a bad idear (see http://www.postfix.org/BASIC_CONFIGURATION_README.html#relay_from). You usually do not want postfix to forward mail from strangers.}}  
{{Warning|{{ic|<nowiki>relay_domains = *</nowiki>}} might me a bad idear (see http://www.postfix.org/BASIC_CONFIGURATION_README.html#relay_to). You usually do not want postfix to forward mail from strangers.}}  
This references a lot of files that do not even exist yet. Let's create them.
This references a lot of files that do not even exist yet. Let's create them.

Revision as of 14:43, 9 January 2014

This article describes how to set up a complete virtual user mail system on an Arch Linux system in the simplest manner possible. However, since a mail system consists of many complex components, quite a bit of configuration will still be necessary. Roughly, the components used in this article are Postfix, Dovecot, PostfixAdmin and Roundcube.

In the end, the provided solution will allow you to use the best currently available security mechanisms, you will be able to send mails using SMTP and SMTPS and receive mails using POP3, POP3S, IMAP and IMAPS. Additionally, configuration will be easy thanks to PostfixAdmin and users will be able to login using Roundcube. What a deal!

This article assumes that you have a working LAMP setup as we will need a working Apache2 as well as MYSQL database. Of course, with a few changes to these instructions you could easily use another httpd and database. For the purposes of this tutorial, however, the choice made above will be used. Additionally, the article assumes all-default settings for every package installed below. No changes except for those mentioned will be required.

Should any unforeseen problems occur, feel free to use the discussion page to voice your problems and I will try to answer.


# pacman -S dovecot postfix



For security reasons, a new user should be created to store the mails:

groupadd -g 5000 vmail
useradd -u 5000 -g vmail -s /sbin/nologin -d /home/vmail -m vmail

A gid and uid of 5000 is used in both cases so that we do not run into conflicts with regular users. All your mail will then be stored in /home/vmail. You could change the home dir to something like /var/mail/vmail but careful to change this in any configuration below as well.


You will need to create an empty database and corresponding user. We will be using PostfixAdmin's tables to fill the database later on. In this article, postfix_user will have read/write access to postfix_db using hunter2 for a password. You are expected to create your database and user yourself as shown in the following code. Make sure to assign proper permissions.

$> mysql -u root -p
CREATE SCHEMA `postfix_db` DEFAULT CHARACTER SET utf8 COLLATE utf8_general_ci ;
CREATE USER 'postfix_user'@'localhost' IDENTIFIED BY 'hunter2';
GRANT ALL ON `postfix_db`.* TO `postfix_user`@`localhost`;


There are basically 2 ways for of doing SMTPS.

One is using the wrapper mode which enables even old/odd clients like Outlook to use TLS. The wrapper mode uses the system service "smtps" which is a non-standard service and runs on port 465.

The other, more proper method is to use a port that simply enforces TLS without any wrapping. The system service for this is "submission" which is standard and uses port 587.

For the improper variant uncomment this in /etc/postfix/master.cf:

smtps     inet  n       -       n       -       -       smtpd
  -o smtpd_tls_wrappermode=yes
  -o smtpd_sasl_auth_enable=yes

And verify that these lines are in /etc/services:

smtps 465/tcp # Secure SMTP
smtps 465/udp # Secure SMTP

otherwise posfix won't start :

postfix/master[5309]: fatal: Servname not supported for ai_socktype

For the proper variant uncomment this in /etc/postfix/master.cf:

smtp     inet  n       -       n       -       -       smtpd
submission     inet  n       -       n       -       -       smtpd
  -o smtpd_tls_security_level=encrypt
  -o smtpd_sasl_auth_enable=yes

To /etc/postfix/main.cf append:

relay_domains = *
virtual_alias_maps = proxy:mysql:/etc/postfix/virtual_alias_maps.cf
virtual_mailbox_domains = proxy:mysql:/etc/postfix/virtual_domains_maps.cf
virtual_mailbox_maps = proxy:mysql:/etc/postfix/virtual_mailbox_maps.cf
virtual_mailbox_base = /home/vmail
virtual_mailbox_limit = 512000000
virtual_minimum_uid = 5000
virtual_transport = virtual
virtual_uid_maps = static:5000
virtual_gid_maps = static:5000
local_transport = virtual
local_recipient_maps = $virtual_mailbox_maps
transport_maps = hash:/etc/postfix/transport

smtpd_sasl_auth_enable = yes
smtpd_sasl_type = dovecot
smtpd_sasl_path = /var/run/dovecot/auth-client
smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_relay_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_tls_auth_only = yes
smtpd_tls_cert_file = /etc/ssl/private/server.crt
smtpd_tls_key_file = /etc/ssl/private/server.key
smtpd_sasl_local_domain = $mydomain
broken_sasl_auth_clients = yes
smtpd_tls_loglevel = 1
Warning: relay_domains = * might me a bad idear (see http://www.postfix.org/BASIC_CONFIGURATION_README.html#relay_to). You usually do not want postfix to forward mail from strangers.

This references a lot of files that do not even exist yet. Let's create them.

Edit /etc/postfix/virtual_alias_maps.cf as new and add:

user = postfix_user
password = hunter2
hosts = localhost
dbname = postfix_db
query = SELECT goto FROM alias WHERE address='%s' AND active = true

Edit /etc/postfix/virtual_domains_maps.cf as new and add:

user = postfix_user
password = hunter2
hosts = localhost
dbname = postfix_db
query = SELECT domain FROM domain WHERE domain='%s' AND backupmx = false AND active = true

Edit /etc/postfix/virtual_mailbox_limits.cf as new and add:

user = postfix_user
password = hunter2
hosts = localhost
dbname = postfix_db
query = SELECT quota FROM mailbox WHERE username='%s'

Edit /etc/postfix/virtual_mailbox_maps.cf as new and add:

user = postfix_user
password = hunter2
hosts = localhost
dbname = postfix_db
query = SELECT maildir FROM mailbox WHERE username='%s' AND active = true

Run postmap on transport to generate its db:

postmap /etc/postfix/transport

We still need the SSL cert and private key:

cd /etc/ssl/certs
openssl req -new -x509 -newkey rsa:1024 -days 365 -keyout server.key -out server.crt
openssl rsa -in server.key -out server.key
chown nobody:nobody server.key server.crt
chmod 400 server.key
chmod 444 server.crt
mv server.key /etc/ssl/private/
mv server.crt /etc/ssl/private/


Start by getting a fresh config file from the pre-existing sample config:

cp /etc/dovecot/dovecot.conf.sample /etc/dovecot/dovecot.conf

In /etc/dovecot/dovecot.conf we'll need to do quite some configuration:

protocols = imap pop3
auth_mechanisms = plain
passdb {
    driver = sql
    args = /etc/dovecot/dovecot-sql.conf
userdb sql {
    driver = sql
    args = /etc/dovecot/dovecot-sql.conf

service auth {
    unix_listener auth-client {
        group = postfix
        mode = 0660
        user = postfix
    user = root

mail_home = /home/vmail/%d/%u
mail_location = maildir:~

ssl_cert = </etc/ssl/private/server.crt
ssl_key = </etc/ssl/private/server.key

See http://wiki2.dovecot.org/Variables for the docevot variables %d and %u.

Now obviously we also need the /etc/dovecot/dovecot-sql.conf we just referenced in the config above. Go ahead and create a /etc/dovecot/dovecot-sql.conf with these contents:

driver = mysql
connect = host=localhost dbname=postfix_db user=postfix_user password=hunter2
# The new name for MD5 is MD5-CRYPT so you might need to change this depending on version
default_pass_scheme = MD5-CRYPT
# Get the mailbox
user_query = SELECT '/home/vmail/%d/%u' as home, 'maildir:/home/vmail/%d/%u' as mail, 5000 AS uid, 5000 AS gid, concat('dirsize:storage=',  quota) AS quota FROM mailbox WHERE username = '%u' AND active = '1'
# Get the password
password_query = SELECT username as user, password, '/home/vmail/%d/%u' as userdb_home, 'maildir:/home/vmail/%d/%u' as userdb_mail, 5000 as  userdb_uid, 5000 as userdb_gid FROM mailbox WHERE username = '%u' AND active = '1'
# If using client certificates for authentication, comment the above and uncomment the following
#password_query = SELECT null AS password, ‘%u’ AS user


To install PostfixAdmin, we can use the postfixadmin package from the official repositories.

Next, PostfixAdmin needs to be configured. First edit the /etc/webapps/postfixadmin/config.inc.php file:

$CONF['configured'] = true;
// correspond to dovecot maildir path /home/vmail/%d/%u 
$CONF['domain_path'] = 'YES';
$CONF['domain_in_mailbox'] = 'YES';
$CONF['database_type'] = 'mysql';
$CONF['database_host'] = 'localhost';
$CONF['database_user'] = 'postfix_user';
$CONF['database_password'] = 'hunter2';
$CONF['database_name'] = 'postfix_db';

Then assuming localhost is the hostname of the machine you are installing this on, navigate to http://localhost/postfixAdmin/setup.php. The setup will guide you through the remaining steps to set up PostfixAdmin.

Note: For a detailed section on setting up domains and mailboxes in PostfixAdmin see the related [Gentoo wiki article]


Roundcube is available in the community repo.

pacman -S roundcubemail

The post install process is similar to any other webapps like PhpMyAdmin or PostFixAdmin. Copy the example configuration file to your webserver configuration directory. If you are using Apache do:

cp /etc/webapps/roundcubemail/apache.conf /etc/httpd/conf/extra/httpd-roundcubemail.conf

Add the include line in /etc/httpd/conf/httpd.conf

Include conf/extra/httpd-roundcubemail.conf

Make some directories writable by the webserver in /usr/share/webapps/roundcubemail/:

chown -R http:http temp logs

Roundcube now requires the pdo_mysql.so extension, make sure this extension is un-commented in your php.ini file. Also check .htaccess for access restrictions. Assuming that localhost is your current host, navigate a browser to http://localhost/roundcubemail/installer/ and follow the instructions. You could use the same database for Roundcube that you already used for PostfixAdmin though you shouldn't. For a proper setup, create a second database "roundcube_db" and a "roundcube_user" for use with Roundcube. Update this info in db.inc.php.

While running the installer, make sure to address the IMAP host with ssl://localhost/ or tls://localhost/ instead of just localhost. Use port 993. Likewise with SMTP, make sure to provide ssl://localhost/ on port 465 if you used the wrapper mode and tls://localhost/ on port 587 if you used the proper TLS mode. See here for an explanation on that.


Make sure your daemons start on boot:

systemctl enable dovecot postfix

Fire it up

Since now hopefully everything is set up correctly, all necessary daemons should be started for a test run:

systemctl start postfix dovecot

Now for testing purposes, create a domain and mail account in PostfixAdmin. Try to login to this account using Roundcube. Now send yourself a mail.

Optional Items

Although these items are not required, they definitely add more completeness to your setup


Is available in the extra repo. Following steps borrowed from SOHO_Postfix#Spamassassin

pacman -S spamassassin

Go over /etc/mail/spamassassin/local.cf and configure it to your needs. Create Spamassassin user/group and folder.

groupadd -g 5001 spamd
useradd -u 5001 -g spamd -s /sbin/nologin -d /var/lib/spamassassin -m spamd
chown spamd:spamd /var/lib/spamassassin

Make sure /etc/conf.d/spamd look like following.

SPAMD_OPTS="--create-prefs --max-children 5 --username spamd --helper-home-dir ${SAHOME} -s ${SAHOME}spamd.log --pidfile /var/run/spamd.pid"

To leave the service ready to run, let's update the spamassassin matching patterns.

Note: If you want to combine Spamassassin and Dovecot Mail Filtering you have to ignore the next two lines and continue further down instead.

Edit /etc/postfix/master.cf and add the content filter under smtp.

smtp       inet  n       -       n       -       -       smtpd
       -o content_filter=spamassassin

Also add the following service entry for spamassassin

spamassassin   unix   -     n       n      -       -       pipe
       user=spamd argv=/usr/bin/vendor_perl/spamc -f -e /usr/sbin/sendmail -oi -f ${sender} ${recipient}
SpamAssassin combined with Dovecot LDA / Sieve (Mailfiltering)
  • Set up LDA and the Sieve-Plugin which is descriped in Dovecot#Sieve. But ignore the last line mailbox_command...
  • Instead add a pipe in /etc/postfix/master.cf
 dovecot   unix  -       n       n       -       -       pipe
       flags=DRhu user=vmail:vmail argv=/usr/bin/vendor_perl/spamc -f -u spamd -e /usr/lib/dovecot/dovecot-lda -f ${sender} -d ${recipient}
  • And activate it in Postfix main.cf
 virtual_transport = dovecot

Enable and start the service with systemctl

systemctl enable spamassassin
systemctl start spamassassin


If you get errors like your imap/pop3 client failing to receive mails, take a look into your /var/log/mail.log file. It turned out that the maildir /home/vmail/mail@domain.tld is just being created if there is at least one email waiting. Otherwise there wouldn't be any need for the directory.

Tips and Tricks

When sending email with Postfix, how can I hide the sender’s IP and username in the Received header

This is a privacy concern mostly, if you use Thunderbird and send an email. The received header will contain your LAN and WAN IP and info about the email client you used. (Original source: AskUbuntu) What we want to do is remove the Received header from outgoing emails. This can be done by applying header_checks exclusively to the submission port. What we need to do is pass the cleanup_service_name option to the submission service so that we can set up a new cleanup service, “subcleanup.” The relevant section of /etc/postfix/master.cf might look like this:

submission inet n       -       -       -       -       smtpd
 -o smtpd_tls_security_level=encrypt
 -o smtpd_sasl_auth_enable=yes
 -o smtpd_client_restrictions=permit_sasl_authenticated,reject
 -o milter_macro_daemon_name=ORIGINATING
 -o cleanup_service_name=subcleanup

Now we can pass the header_checks option to the new cleanup service. That part of /etc/postfix/master.cf might look like this:

cleanup   unix  n       -       -       -       0       cleanup
subcleanup unix n       -       -       -       0       cleanup
 -o header_checks=regexp:/etc/postfix/submission_header_checks

Finally, we need to create the file /etc/postfix/submission_header_checks, which will contain the regex that filters offending Received header lines:

/^Received:/ IGNORE
/^User-Agent:/ IGNORE

See also