Difference between revisions of "SonyEricsson samba sharing"

From ArchWiki
Jump to: navigation, search
(rename sections)
 
(4 intermediate revisions by 2 users not shown)
Line 2: Line 2:
 
You can have acess to Sony Ericsson phones and phone cards via samba sharing. It works even with old firmware and you have still full functional phone, not like USB mass storage mode.
 
You can have acess to Sony Ericsson phones and phone cards via samba sharing. It works even with old firmware and you have still full functional phone, not like USB mass storage mode.
  
==Supported Phones==
+
==Supported phones==
 
* Se C702
 
* Se C702
  
==Setting Up Phone==
+
==Set up phone==
  
 
* Settings > Connectivity > USB > USB network > USB Network type > Via Computer
 
* Settings > Connectivity > USB > USB network > USB Network type > Via Computer
Line 12: Line 12:
 
* Settings > Connectivity > Sreaming settings > Connect using > USB Ethernet > Allow local connection > Yes
 
* Settings > Connectivity > Sreaming settings > Connect using > USB Ethernet > Allow local connection > Yes
  
==Setting Up Computer==
+
==Set up computer==
  
* you must have installed samba:
+
* You must have installed [[Samba]].
 
 
# pacman -S samba smbclient
 
  
 
* start samba:  
 
* start samba:  
Line 25: Line 23:
 
* set IP for phone:
 
* set IP for phone:
  
  # ifconfig usb0 192.168.0.50
+
  # ip link set dev usb0 address 192.168.0.50
  
 
* now you should be able to ping your phone
 
* now you should be able to ping your phone
Line 34: Line 32:
 
enter name and password you choosed in phone
 
enter name and password you choosed in phone
  
==External Links==
+
==External links==
 
[http://www.abclinuxu.cz/poradna/hardware/show/250631 Czech-language wiki]
 
[http://www.abclinuxu.cz/poradna/hardware/show/250631 Czech-language wiki]

Latest revision as of 08:28, 24 August 2017

You can have acess to Sony Ericsson phones and phone cards via samba sharing. It works even with old firmware and you have still full functional phone, not like USB mass storage mode.

Supported phones

  • Se C702

Set up phone

  • Settings > Connectivity > USB > USB network > USB Network type > Via Computer
  • Settings > Connectivity > Network sharing > set up name and password
  • Settings > Connectivity > Sreaming settings > Connect using > USB Ethernet (set ip adress eg. 192.168.0.50, mask 255.255.255.0)
  • Settings > Connectivity > Sreaming settings > Connect using > USB Ethernet > Allow local connection > Yes

Set up computer

  • You must have installed Samba.
  • start samba:
# /etc/rc.d/samba start
  • plug in phone in Phone Mode
  • set IP for phone:
# ip link set dev usb0 address 192.168.0.50
  • now you should be able to ping your phone
$ ping 192.168.0.50
  • in eg. Konqueror you can browse phone by entering
smb://192.168.0.50 

enter name and password you choosed in phone

External links

Czech-language wiki