Difference between revisions of "Sony Vaio Pro SVP-1x21"

From ArchWiki
Jump to: navigation, search
(Toggle TouchPad via Fn+F1: update script to use kernel control if available)
Line 157: Line 157:
Set the maximum charge to 50/80/100% by modifying {{ic|battery_charge_limiter}} found in:
Set the maximum charge to 50/80/100% by modifying {{ic|battery_charge_limiter}} found in:
In order for changes to take effect, it may be necessary to execute:
echo 0 | sudo tee /sys/devices/platform/sony-laptop/battery_care_limiter
=== USB ports ===
=== USB ports ===

Revision as of 05:04, 15 November 2013

This document will guide you through the process of installing Arch Linux on the 2013 Sony Vaio Pro Haswell based Ultrabook. From what we've seen, this laptop seems to be very Arch friendly! :)


  • Intel Haswell Series CPU (4200U/4500U)
  • 4/8GB of DDR3 1600MHz RAM
  • 128 to 512GB SSD with read speeds over 1GB/s
  • 11/13" LED-backlit 1080p IPS screen
  • Optional touchscreen
  • Backlit keyboard
  • Webcam
  • Wireless: WiFi 802.11n, Bluetooth, NFC
  • Sensors: ambilight
  • Ultra low weight; around 1.1kg for the 13" model


BIOS Configuration

Get into the BIOS by pushing the assist button when the system is shut off and then hitting Start BIOS Setup. Do not try to boot from your usb key using recovery mode, instead change the boot order in the BIOS. Make the following changes:

Intel(R) AT Support System	[Disabled]
Secure Boot			[Disabled]
External Device Boot		[Enabled]
Select 1st Boot Priority	[External Device]

If you want to use the legacy boot (non-EFI), change:

Boot Mode			[Legacy]

Install media

  • Important! Do NOT use the usb port labelled with a lightning bolt, you will never get it to even boot.
  • When booting from USB you might need to append libata.force=noncq to the kernel parameters to avoid problems with the SSD.
  • When installing via UEFI from USB create an UEFI bootable USB from ISO

Internet connection

Works as expected as of kernel version 3.11


Picking a bootloader


Inside the chroot UEFI variables might not be available. To make them available for installing the bootloader, run

   mount -t efivarfs efivarfs /sys/firmware/efi/efivars

Works as expected. Make sure to mount /dev/sda3 under /boot to install Gummiboot to the existing EFI system partiton.


Some users are unable to run the install.

Note: Grub should install fine if UEFI boot mode is turned on in the BIOS.
Dual-boot Windows 8

Windows 8 fast boot mode overwrites your EFI variables. To keep your bootloader in working order, fast boot needs to be disabled. In cmd.exe as Administrator:

   powercfg /h off

The laptop firmware seems to have a preference to boot Windows even when other bootmanagers are present.

A solution is to move your bootloader to a recognised location such as /EFI/Boot/bootx64.efi [1]



Works as expected.


  • For a faster boot, don't forget to undo these BIOS settings:
External Device Boot		[Disabled]
Select 1st Boot Priority	[Internal Drive]
  • If you want all the power from the Haswell CPU, install a RC of the 3.12 kernel (linux-mainlineAUR).

Hardware support


Issues regarding getting full performance are being fixed in Linux kernel 3.12. 3.11 is working fine, just has no turbo.


Works good with the xf86-video-intel driver. For instuctions on installing and configuring, see the Intel Graphics article.


As the Installation Guide suggests, install alsa-utils and follow this guide to get started. Works out of the box, although main sound card may have index 1, making it non-default (index 0 is taken by Intel HDMI). To fix this, edit /usr/share/alsa/alsa.conf (near line 68):

defaults.ctl.card 1
defaults.pcm.card 1


The Intel 7260 WiFi card is supported in Linux kernel 3.11 or newer.

Touch screen

Tapping works out of the box. Multitouch gestures do not work.

Keyboard backlight

Works out of the box. Enables in low amblient light and a key press, turns off after about 20s. Can be customized by modifying kbd_backlight and kbd_backlight_timeout found in:


A simple shell script for toggling the backlight, bind to a keyboard shortcut for easy use:

if [ $(<$path) -eq 1 ]
echo "$newval" > $path

Make sure that you can write to this file without root privileges:

# chmod 777 /sys/devices/platform/sony-laptop/kbd_backlight

Monitor backlight control

Works out of the box with xorg-xbacklight. By default the backlight is only adjusted by 1% per button press. This can easily be fixed by binding those keys to a xorg-xbacklight command. DM:s like Xfce does take larger steps by default.

With KDE 1% adjustment can be fixed by kernel module parameter video.brightness_switch_enabled=0. This will disable kernel driver 1% adjustment, then KDE PowerDevil correctly adjust brightness by 10% and shows gauge window. There is no need to bind keys.


Works great with the xf86-input-synaptics driver. A good base config can be found here.

Keyboard and buttons

Works very well out of the box.

Toggle TouchPad via Fn+F1

The hotkey that toggles the TouchPad can be configured using acpid. Create the following two files to do so:

event=button.fnf1 FNF1
action=/etc/acpi/actions/toggle-touchpad.sh "%e"
#! /bin/sh

# Modern method, for Linux 3.11 or later.
if [ -r "$sys_enable_file" ]; then
  read -r is_currently_enabled < "$sys_enable_file"
  echo > "$sys_enable_file" $((1 - $is_currently_enabled))

# Older method: have the X11 driver do it
  export DISPLAY=:0
  USER=`who | grep ':0' | grep -o '^\w*' | head -n1`

  if [ "$(su "$USER" -c "synclient -l" | grep TouchpadOff | awk '{print $3}')" == "0" ]; then
      su "$USER" -c "synclient TouchpadOff=1"
      su "$USER" -c "synclient TouchpadOff=0"
Note: Restart acpid using systemctl after adding the files.

Fan control

Works well out of the box. It stays quiet during normal load. Change profile by editing thermal_control found in:


Available profiles can be found in thermal_profiles in the same directory.


Set the maximum charge to 50/80/100% by modifying battery_charge_limiter found in:


In order for changes to take effect, it may be necessary to execute:

echo 0 | sudo tee /sys/devices/platform/sony-laptop/battery_care_limiter

USB ports

Some users are having issues with the usb port labeled with a lightning bolt not working for anything but charging. This is a known issue for many Sony laptops.

SD card slot

Works out of the box.


Works out of the box with neardAUR.


Works out of the box.


Works out of the box.

Internal mic

Not working for some users. A fix has been committed to the kernel in 3.12-rc5.

Summary of known issues

  • Haswell turbo is not supported in kernel 3.11.
  • Some users are having trouble with the internal Mic showing as "Unavailable" to pulse and not working. (fix is merged linux 3.12-rc5)
  • Only one usb port fully working for some users.