Difference between revisions of "Sony Vaio VGN-SZ38GP"

From ArchWiki
Jump to: navigation, search
(Created page with "Category:Sony (English) This wiki entry describes the installation of ArchLinux on a Sony Vaio VGN-SZ38GP laptop. I a still configuring some stuff to make every thing works a...")
 
m (Corrected URL to git AUR)
 
(24 intermediate revisions by 6 users not shown)
Line 1: Line 1:
[[Category:Sony (English)]]
+
[[Category:Sony]]
This wiki entry describes the installation of ArchLinux on a Sony Vaio VGN-SZ38GP laptop. I a still configuring some stuff to make every thing works as I would, but I decide to share what I have done so far. Do not hesitate to had your own trick to improve the Archlinux experience on that device.
+
{{Style}}
  
==System Specs==
+
==Switch Mode==
*Platform
+
 
Intel® Centrino® Duo Mobile Technology
+
*When you finished your installation, download the [http://www.nvidia.com/object/linux-display-ia32-256.44-driver.html latest nvidia driver]
Intel® Core™2 Duo Processor T7200 (2 GHz) *1*2
+
*Backup the files : libGL.so.1.2  and libglx.so that you can find respectively under the folder /usr/lib/ and /usr/lib/xorg/modules/extensions/
Intel® PRO/Wireless 3945ABG Network Connection
 
*Chipset Intel® 945GM Express Chipset
 
*Processor System Bus  667MHz
 
*Memory Bus 533MHz
 
*Cache Memory L1 Cache: 64KB L2 Cache: 4MB (on CPU)
 
*Main Memory
 
1 GB DDR2 SDRAM*3 (upgradeable up to 2 GB)
 
(partially shared with video memory)*4
 
2 SO-DIMM slots (The pre-installed memory module uses one)
 
*Hard Disk 120 GB (HDD Recovery Storage:7GB*5, C:50GB, D:Remain) Serial ATA, 5400 rpm
 
*Optical Drive DVD±RW/+R DL/RAM Drive*6
 
Maximum reading speed: DVD-ROM: 8x,DVD+R, DVD-R, DVD+RW, DVD-RW, DVD+R DL, DVD-R DL: 4x,DVD-RAM: 2x,CD-RW: 12x,CD-R, CD-ROM: 24x
 
Maximum writing speed: DVD+R, DVD-R: 4x,DVD+RW, DVD+R DL: 2.4x,DVD-RW,DVD-RAM: 2x,CD-R: 24x,CD-RW: 10x
 
*Graphics Accelerator NVIDIA® GeForce® Go 7400 with NVIDIA® TurboCache™*4
 
*Video Memory 128MB*4
 
*Display 13.3" Wide (WXGA: 1280 x 800) TFT colour display (Clear Bright LCD: White LED, Wide View)
 
*Interfaces USB 2.0 x 2*7 ・i.LINK (IEEE 1394) S400 (4pin) ・Network (RJ-45) connector (100BASE-TX/10BASE-T) ・Headphone jack (stereo mini) ・Microphone jack (stereo mini) ・Monitor connector (Analogue RGB, mini D-sub 15pin) ・Modular (RJ-11) connector ・Docking Station connector ・Memory Stick Duo Slot*8 (MagicGate compatible, Memory Stick PRO Duo compatible, High-speed data transfer compatible)
 
*Multi Media Card Reader compatible with: Memory Stick*10 (Standard/Duo Size, MagicGate, Memory Stick PRO), SD Memory Card*11, xD-Picture Card
 
*Wireless LAN Integrated Wireless Intel® PRO/Wireless 3945ABG LAN IEEE 802.11a/802.11b/802.11g*12
 
Data rate: maximum 11Mbps (802.11b)/54 Mbps (802.11a/g) *13 ・Frequency: 5 GHz (802.11a), 2.4 GHz (802.11b/g)
 
*Security Chip TCG Ver1.2 compliant Trusted Platform Module (TPM)
 
*Fingerprint Sensor Built-in Fingerprint Sensor
 
*Bluetooth® Bluetooth® standard version 2.0+EDR*13 ・Output: maximum +6dBm ・Frequency: 2.4 GHz
 
*Modem V.92 and V.90 Compliant
 
*PC Card Slot ExpressCard™/34 x 1, Type I/II x 1
 
*Camera 310,000 pixels effective Image Device: 1/8", VGA CMOS
 
Lens: 2 elements in 2 groups, F4(Fixed) Focus distance: f=1.74 mm
 
Built-in monaural microphone aside
 
*Audio DSD compatible high quality sound chip:“Sound Reality”(Intel® High Definition Audio compatible)・3D audio (Direct Sound 3D support)・Built-in stereo speakers
 
*Keyboard/Input Device ca 19mm Key pitch / 3mm Key stroke ・86 Keys・Intelligent Alps Touchpad
 
*Battery VGP-BPS2C*14 Lithium-ion battery: up to 6.5 hours of use (at STAMINA MODE) *15
 
*Dimensions (W x H x D) 315 × 21.8 - 32.6 × 234.3 mm
 
*Weight 1.69 kg (including the supplied battery)
 
  
==lspci Output==
+
*'''You need to copy them in a different location because when you will install the nvidia driver it will automatically remove them.'''
* Stamina Mode
+
*Backup your xorg.conf file that you can find under /etc/X11/  
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
 
'''00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)'''
 
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
 
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
 
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
 
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
 
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
 
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
 
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
 
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
 
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
 
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
 
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
 
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
 
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
 
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
 
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
 
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
 
06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
 
07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 15)
 
09:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
 
09:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
 
09:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
 
  
*Speed Mode
+
''I choose to put the lib file under the folder /opt/gpu/intel/lib and the xorg.conf as /etc/X11/xorg.intel''
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
+
*Reboot the computer in Speed Mode.
'''01:00.0 VGA compatible controller: nVidia Corporation GeForce? Go 7400 (rev a1)'''
 
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
 
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
 
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
 
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
 
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
 
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
 
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
 
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
 
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
 
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
 
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
 
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
 
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
 
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
 
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
 
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
 
06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
 
07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 15)
 
09:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
 
09:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
 
09:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
 
  
==Archlinux Installation==
+
If you are running X you need to kill it. First go to a command prompt using Ctrl+Alt+F1-6 and after you have login run the command: killall X. You also need to kill kdm (killall kdm) or other login manager that you may have since it will make X respawn.  
Basically you just need to follow the [[Beginners' Guide]], I recommend to do the installation under the stamina mode (with intel graphic card less trouble) and then we will explain how to configure the speed mode.
 
  
==Switch Mode==
+
Then you have to change the runlevel by using the command: init 3.
- When you finished your installation, download the [http://www.nvidia.com/object/linux-display-ia32-256.44-driver.html latest nvidia driver]
+
*Run the script provided by nvidia to install the driver, it will automatically generate a new xorg.conf file with the correct setting for you graphic card.
   
+
*Backup the files libGL.so.<Nvidia Version> and libglx.so.<Nvidia Version> that you can respectively find in /usr/lib and /usr/lib/xorg/modules/extensions
- Backup the files : libGL.so.1.2 and libglx.so that you can find respectively under the folder /usr/lib/ and /usr/lib/xorg/modules/extensions/
+
*Backup xorg.conf file generated by the nvidia driver
 +
''I choose to put the lib file under the folder /opt/gpu/nv/lib and the xorg.conf as /etc/X11/xorg.nv''
 +
*Now use the following script :
 +
#!/bin/bash
 +
VIDEO=`lspci | grep -c nVidia`
 +
NVIDIA_VERSION="256.35"
 +
if [ "$VIDEO" = 1 ]; then
 +
cp -f /etc/X11/xorg.conf.nv /etc/X11/xorg.conf
 +
ln -sf /opt/gpu/nv/libGL.so.$NVIDIA_VERSION /usr/lib/libGL.so.1
 +
ln -sf /opt/gpu/nv/libglx.so.$NVIDIA_VERSION /usr/lib/xorg/modules/extensions/libglx.so
 +
echo "Speed Mode"
 +
else
 +
cp -f /etc/X11/xorg.conf.intel /etc/X11/xorg.conf
 +
ln -sf /opt/gpu/intel/libGL.so.1.2 /usr/lib/libGL.so.1
 +
ln -sf /opt/gpu/intel/libglx.xorg /usr/lib/xorg/modules/extensions/libglx.so
 +
echo "Stamina Mode"
 +
fi
 +
*Make you script executable using the following command : chmod +x <your_script_name>
 +
*Add your script path to the /etc/rc.local file.
 +
 
 +
==Screen Brightness==
 +
 
 +
For each graphic card there is a specific program that handle it, for the Intel card it is xbacklight and for Nvidia card it is smartdimmer.
 +
 
 +
xbacklight is installed by default with the Intel driver so you have nothing to do, but for Nvidia you will have to install {{AUR|smartdimmer}}{{Broken package link|{{aur-mirror|smartdimmer}}}} from the [[AUR]].
 +
Know we will have to configure acpi to configure the fn keys.
 +
*Go to /etc/acpi/events and create two files sonybright-down  sonybright-up.
 +
*in the first one add the following line :
 +
# /etc/acpi/events/sony-brightness-down
 +
event=sony/hotkey SPIC 00000001 00000010
 +
action=/etc/acpi/actions/sonybright.sh down
 +
*in the second one add the following line :
 +
# /etc/acpi/events/sony-brightness-up
 +
event=sony/hotkey SPIC 00000001 00000011
 +
action=/etc/acpi/actions/sonybright.sh up
 +
*Now you will have to create two script file for handling the brightness for each graphic card.
 +
*Create a file named intelbright.sh and put the following line inside :
 +
#!/bin/bash
 +
if [ "x$1" = "xdown" ]; then
 +
xbacklight -dec 10;
 +
elif [ "x$1" = "xup" ]; then
 +
xbacklight -inc 20;
 +
fi
 +
'''If the previous script does not work, you can use the alternative one below :'''
 +
#!/bin/bash
 +
val=$(cat /sys/class/backlight/sony/actual_brightness)
 +
if [ "x$1" = "xdown" ]; then
 +
((val--));
 +
elif [ "x$1" = "xup" ]; then
 +
((val++));
 +
fi
 +
echo $val > /sys/class/backlight/sony/brightness
 +
*Create a file named nvlbright.sh and put the following line inside :
 +
#!/bin/bash
 +
if [ "x$1" = "xdown" ]; then
 +
smartdimmer -d;
 +
  elif [ "x$1" = "xup" ]; then
 +
smartdimmer -i;
 +
fi
 +
*You can now add the following line to the script that we used to switch graphic card :
 +
#!/bin/bash
 +
VIDEO=`lspci | grep -c nVidia`
 +
NVIDIA_VERSION="256.35"
 +
if [ "$VIDEO" = 1 ]; then
 +
cp -f /etc/X11/xorg.conf.nv /etc/X11/xorg.conf
 +
'''cp -f /opt/gpu/bright/nvbright.sh /etc/acpi/actions/sonybright.sh'''
 +
ln -sf /opt/gpu/nv/libGL.so.$NVIDIA_VERSION /usr/lib/libGL.so.1
 +
ln -sf /opt/gpu/nv/libglx.so.$NVIDIA_VERSION /usr/lib/xorg/modules/extensions/libglx.so
 +
echo "Speed Mode"
 +
else
 +
cp -f /etc/X11/xorg.conf.intel /etc/X11/xorg.conf
 +
'''cp -f /opt/gpu/bright/intelbright.sh /etc/acpi/actions/sonybright.sh'''
 +
  ln -sf /opt/gpu/intel/libGL.so.1.2 /usr/lib/libGL.so.1
 +
ln -sf /opt/gpu/intel/libglx.xorg /usr/lib/xorg/modules/extensions/libglx.so
 +
echo "Stamina Mode"
 +
fi
 +
 
 +
==Wifi==
  
- '''You need to copy them in a different location because when you will install the nvidia driver it will automatically remove them.'''
+
If you have your wireless switch that is not automatically activating your wireless if you do not turn it on before turn on your computer.
 +
You can fix the problem by adding the following line to /etc/modprobe.d/modprobe.conf
 +
options sony-laptop mask=0xffffdfff
  
-Backup your xorg.conf file that you can find under /etc/X11/
+
==Fan Speed==
''I choose to put the lib file under the folder /opt/gpu/intel/lib and the xorg.conf as /etc/X11/xorg.intel''
 
  
- Reboot the computer in Speed Mode.
+
You can control the fan speed by using the '''vaiofand''' daemon that you can find on this address : [http://vaio-utils.org/fan/ http://vaio-utils.org/fan/]
If you are running X you need to kill it. First go to a command prompt using Ctrl+Alt+F1-6 and after you have login run the command: killall X. You also need to kill kdm (killall kdm) or other login manager that you may have since it will make X respawn.  
+
There is also a PKGBUILD available in [https://aur.archlinux.org/packages.php?ID=38826 AUR].
Then you have to change the runlevel by using the command: init 3.
 
  
- Run the script provided by nvidia to install the driver, it will automatically generate a new xorg.conf file with the correct setting for you graphic card.
+
==Power Saving==
  
'''to be continued ...'''
+
You can automatically turn of some device like the bluetooth, the firewire port, the cd/dvd drive or the audio card by using the '''vaiopower''' daemon that you can find on this address : [http://vaio-utils.org/power/  http://vaio-utils.org/power/]
 +
There is also a PKGBUILD available in [https://aur.archlinux.org/packages/vaiopower/ AUR].

Latest revision as of 12:22, 15 November 2015

Tango-edit-clear.pngThis article or section needs language, wiki syntax or style improvements.Tango-edit-clear.png

Reason: please use the first argument of the template to provide a brief explanation. (Discuss in Talk:Sony Vaio VGN-SZ38GP#)

Switch Mode

  • When you finished your installation, download the latest nvidia driver
  • Backup the files : libGL.so.1.2 and libglx.so that you can find respectively under the folder /usr/lib/ and /usr/lib/xorg/modules/extensions/
  • You need to copy them in a different location because when you will install the nvidia driver it will automatically remove them.
  • Backup your xorg.conf file that you can find under /etc/X11/

I choose to put the lib file under the folder /opt/gpu/intel/lib and the xorg.conf as /etc/X11/xorg.intel

  • Reboot the computer in Speed Mode.

If you are running X you need to kill it. First go to a command prompt using Ctrl+Alt+F1-6 and after you have login run the command: killall X. You also need to kill kdm (killall kdm) or other login manager that you may have since it will make X respawn.

Then you have to change the runlevel by using the command: init 3.

  • Run the script provided by nvidia to install the driver, it will automatically generate a new xorg.conf file with the correct setting for you graphic card.
  • Backup the files libGL.so.<Nvidia Version> and libglx.so.<Nvidia Version> that you can respectively find in /usr/lib and /usr/lib/xorg/modules/extensions
  • Backup xorg.conf file generated by the nvidia driver

I choose to put the lib file under the folder /opt/gpu/nv/lib and the xorg.conf as /etc/X11/xorg.nv

  • Now use the following script :
#!/bin/bash
VIDEO=`lspci | grep -c nVidia`
NVIDIA_VERSION="256.35"
if [ "$VIDEO" = 1 ]; then
cp -f /etc/X11/xorg.conf.nv /etc/X11/xorg.conf
ln -sf /opt/gpu/nv/libGL.so.$NVIDIA_VERSION /usr/lib/libGL.so.1
ln -sf /opt/gpu/nv/libglx.so.$NVIDIA_VERSION /usr/lib/xorg/modules/extensions/libglx.so
echo "Speed Mode"
else
cp -f /etc/X11/xorg.conf.intel /etc/X11/xorg.conf
ln -sf /opt/gpu/intel/libGL.so.1.2 /usr/lib/libGL.so.1
ln -sf /opt/gpu/intel/libglx.xorg /usr/lib/xorg/modules/extensions/libglx.so
echo "Stamina Mode"
fi
  • Make you script executable using the following command : chmod +x <your_script_name>
  • Add your script path to the /etc/rc.local file.

Screen Brightness

For each graphic card there is a specific program that handle it, for the Intel card it is xbacklight and for Nvidia card it is smartdimmer.

xbacklight is installed by default with the Intel driver so you have nothing to do, but for Nvidia you will have to install smartdimmerAUR[broken link: archived in aur-mirror] from the AUR. Know we will have to configure acpi to configure the fn keys.

  • Go to /etc/acpi/events and create two files sonybright-down sonybright-up.
  • in the first one add the following line :
# /etc/acpi/events/sony-brightness-down
event=sony/hotkey SPIC 00000001 00000010
action=/etc/acpi/actions/sonybright.sh down
  • in the second one add the following line :
# /etc/acpi/events/sony-brightness-up
event=sony/hotkey SPIC 00000001 00000011
action=/etc/acpi/actions/sonybright.sh up
  • Now you will have to create two script file for handling the brightness for each graphic card.
  • Create a file named intelbright.sh and put the following line inside :
#!/bin/bash
if [ "x$1" = "xdown" ]; then
xbacklight -dec 10;
elif [ "x$1" = "xup" ]; then
xbacklight -inc 20;
fi

If the previous script does not work, you can use the alternative one below :

#!/bin/bash
val=$(cat /sys/class/backlight/sony/actual_brightness)
if [ "x$1" = "xdown" ]; then
((val--));
elif [ "x$1" = "xup" ]; then
((val++));
fi
echo $val > /sys/class/backlight/sony/brightness
  • Create a file named nvlbright.sh and put the following line inside :
#!/bin/bash
if [ "x$1" = "xdown" ]; then
smartdimmer -d;
elif [ "x$1" = "xup" ]; then
smartdimmer -i;
fi
  • You can now add the following line to the script that we used to switch graphic card :
#!/bin/bash
VIDEO=`lspci | grep -c nVidia`
NVIDIA_VERSION="256.35"
if [ "$VIDEO" = 1 ]; then
cp -f /etc/X11/xorg.conf.nv /etc/X11/xorg.conf
cp -f /opt/gpu/bright/nvbright.sh /etc/acpi/actions/sonybright.sh
ln -sf /opt/gpu/nv/libGL.so.$NVIDIA_VERSION /usr/lib/libGL.so.1
ln -sf /opt/gpu/nv/libglx.so.$NVIDIA_VERSION /usr/lib/xorg/modules/extensions/libglx.so
echo "Speed Mode"
else
cp -f /etc/X11/xorg.conf.intel /etc/X11/xorg.conf
cp -f /opt/gpu/bright/intelbright.sh /etc/acpi/actions/sonybright.sh
ln -sf /opt/gpu/intel/libGL.so.1.2 /usr/lib/libGL.so.1
ln -sf /opt/gpu/intel/libglx.xorg /usr/lib/xorg/modules/extensions/libglx.so
echo "Stamina Mode"
fi

Wifi

If you have your wireless switch that is not automatically activating your wireless if you do not turn it on before turn on your computer. You can fix the problem by adding the following line to /etc/modprobe.d/modprobe.conf

options sony-laptop mask=0xffffdfff

Fan Speed

You can control the fan speed by using the vaiofand daemon that you can find on this address : http://vaio-utils.org/fan/ There is also a PKGBUILD available in AUR.

Power Saving

You can automatically turn of some device like the bluetooth, the firewire port, the cd/dvd drive or the audio card by using the vaiopower daemon that you can find on this address : http://vaio-utils.org/power/ There is also a PKGBUILD available in AUR.