Difference between revisions of "Steam"

From ArchWiki
Jump to navigation Jump to search
(cleanup dependencies, remove s3tc dependencies as game specific, just check the first paragraph)
Line 22: Line 22:
Steam makes heavy usage of the Arial font. A decent Arial font to use is {{Pkg|ttf-liberation}} or the official Microsoft Arial fonts: {{aur|ttf-microsoft-arial}} or {{aur|ttf-ms-fonts}} packages from the [[AUR]]. Asian languages require {{Pkg|wqy-zenhei}} to display properly.
Steam makes heavy usage of the Arial font. A decent Arial font to use is {{Pkg|ttf-liberation}} or the official Microsoft Arial fonts: {{aur|ttf-microsoft-arial}} or {{aur|ttf-ms-fonts}} packages from the [[AUR]]. Asian languages require {{Pkg|wqy-zenhei}} to display properly.
Steam is '''not supported''' on this distribution. As such some fixes are needed on the users part to get things functioning properly. Several games have dependencies which may be missing from your system.  If a game fails to launch (often without error messages) then make sure all of the libraries listed below that game are installed. Please install {{Pkg|libtxc_dxtn}} and {{Pkg|lib32-libtxc_dxtn}} as almost all games require it.
Steam is '''not supported''' on this distribution. As such some fixes are needed on the users part to get things functioning properly. Several games have dependencies which may be missing from your system.  If a game fails to launch (often without error messages) then make sure all of the libraries listed below that game are installed. Please install {{Pkg|libtxc_dxtn}} and {{Pkg|lib32-libtxc_dxtn}} with mesa drivers as almost all games require it.
===General troubleshooting===
===General troubleshooting===
Line 74: Line 74:
* {{pkg|lib32-libxmu}}
* {{pkg|lib32-libxmu}}
* {{pkg|lib32-sdl_ttf}}
* {{pkg|lib32-sdl_ttf}}
If you are using open source drivers you will need {{pkg|lib32-libtxc_dxtn}} . See [http://www.frictionalgames.com/forum/thread-10924.html official forum] for details
====And Yet It Moves====
====And Yet It Moves====
Line 96: Line 92:
   ayim_dir="$(dirname "$(readlink -f "${BASH_SOURCE[0]}")")"
   ayim_dir="$(dirname "$(readlink -f "${BASH_SOURCE[0]}")")"
* {{pkg|lib32-libtxc_dxtn}} with mesa drivers
====Counter-Strike: Source====
====Counter-Strike: Source====
Line 230: Line 222:
====Postal 2====
====Postal 2====
Postal 2 runs without any additional dependencies.
Postal 2 runs without any additional dependencies.
* {{pkg|libtxc_dxtn}} and {{pkg|lib32-libtxc_dxtn}}
====Revenge of the Titans====
====Revenge of the Titans====
Line 284: Line 272:
* {{pkg|glu}}
* {{pkg|glu}}
* {{pkg|mono}}
====Steel Storm: Burning Retribution====
====Steel Storm: Burning Retribution====
Line 304: Line 291:
====Team Fortress 2 ====
====Team Fortress 2 ====
* {{pkg|lib32-libtxc_dxtn}}
======No audio======
======No audio======
Line 333: Line 317:
* {{pkg|lib32-glu}}
* {{pkg|lib32-glu}}
* {{pkg|lib32-libxxf86vm}}
* {{pkg|lib32-libxxf86vm}}
* {{pkg|lib32-libdrm}}
* {{pkg|lib32-openal}}
* {{pkg|lib32-openal}}
* {{pkg|lib32-mesa}}
* {{pkg|lib32-libtxc_dxtn}}
* {{pkg|xorg-xwininfo}}
* {{pkg|xorg-xwininfo}}

Revision as of 22:05, 1 April 2013

zh-CN:Steam Template:Article summary start Template:Article summary text

Template:Article summary heading Template:Article summary wiki Template:Article summary end

See the Steam Wikipedia page and the page in the Wine Application Database for more info.


Native Steam on Linux

Note: Arch Linux is not officially supported.
Note: If you have a pure 64-bit installation, you will need to enable the multilib repository in pacman. This is because the Steam client is a 32-bit application. It may also make sense to install multilib-devel to provide some important multilib libraries. You also most likely need to install the 32-bit version of your graphics driver to run Steam.

Install steam from the multilib repository.

Steam makes heavy usage of the Arial font. A decent Arial font to use is ttf-liberation or the official Microsoft Arial fonts: ttf-microsoft-arialAUR or ttf-ms-fontsAUR packages from the AUR. Asian languages require wqy-zenhei to display properly.

Steam is not supported on this distribution. As such some fixes are needed on the users part to get things functioning properly. Several games have dependencies which may be missing from your system. If a game fails to launch (often without error messages) then make sure all of the libraries listed below that game are installed. Please install libtxc_dxtn and lib32-libtxc_dxtn with mesa drivers as almost all games require it.

General troubleshooting

Note: In addition to being documented here, any bug/fix/error should be, if not already, reported on Valve's bug tracker on their GitHub page.
Note: Connection problems may occur when using DD-WRT with peer-to-peer traffic filtering.

GUI problems with KDE

Valve GitHub issue 594

If you are using KDE and you have problems with the GUI (such as lag or random crashes) modify the compositing type to OpenGL/Raster. In KDE system settings, go to "Desktop Effects" in the "Workspace Appearance and Behaviour" section. Open the "Advanced" tab. Change "Compositing type" from XRender to OpenGL.

The close button only minimizes the window

Valve GitHub issue 1025

If you have your tray icon working you have the option of making the close button close to tray instead of minimize. To do this, set the environment variable STEAM_FRAME_FORCE_CLOSE to 1. You can do this by launching Steam using the following command.


Flash not working on 64-bit systems

Steam Support article

First ensure lib32-flashplugin is installed. It should be working at this point, if not create a local Steam flash plugin folder

mkdir ~/.steam/bin32/plugins/

and set a symbolic link to the global lib32 flash plugin file in your upper new folder

ln -s /usr/lib32/mozilla/plugins/libflashplayer.so ~/.steam/bin32/plugins/

Text is corrupt or missing

The Steam Support instructions for Windows seem to work on Linux also: Simply download SteamFonts.zip and install them (copying to ~/.fonts/ works at least).

Error on some games: S3TC support is missing

Install the following dependencies:

Black screen on (Valve?) games (but audio works)

Check the Steam stdout/stderr for Error lines, some quick dependencies for reference:

run steam from console via primusrun steam

SetLocale('en_US.UTF-8') fails at game startup

Edit /etc/locale.gen in your favourite editor and uncomment the line en_US.UTF-8 UTF-8. Then run locale-gen as root.

Game-specific depencencies and troubleshooting

Note: Steam installs library dependencies of a game to a library directory, but some are missing at the moment. Report bugs involving missing libraries on Valve's bug tracker on their GIT page before adding workarounds here, and then provide a link to the bug so it can be removed as the problems are fixed. Libraries like glu and libtxc_dxtn are exceptions to this, as they are just part of the implementation of the open drivers.

Amnesia: The Dark Descent


And Yet It Moves


Game refuses to launch and one of the following messages can be observed on console

 readlink: extra operand ‘Yet’
 Try 'readlink --help' for more information.


 This script must be run as a user with write priviledges to game directory

To fix this, open ~/.steam/root/SteamApps/common/And Yet It Moves/AndYetItMovesSteam.sh in text editor and replace line

 ayim_dir="$(dirname "$(readlink -f ${BASH_SOURCE[0]})")"


 ayim_dir="$(dirname "$(readlink -f "${BASH_SOURCE[0]}")")"

Counter-Strike: Source

Game crashes upon joining

If the game is constantly crashing when trying to join a game and in ~/.steam/root/SteamApps/your@account/Counter Strike Source/hl2.sh you have __GL_THREADED_OPTIMIZATIONS=1, try changing it to 0.

Crusader Kings II

Game is installed into $HOME/Steam/SteamApps/common/Crusader Kings II.

Game can be started directly, without need of running Steam on background, using command $HOME/Steam/SteamApps/common/Crusader Kings II/ck2.

Saves are stored in $HOME/Documents/Paradox Interactive/Crusader Kings II/save games/.

No audio

The default audio driver used by Crusader Kings 2 is for PulseAudio, so an override is necessary:


Defender's Quest: Valley of the Forgotten

Game does not start
  • Package adobe-air-sdk installs Adobe Air not in the place where the game expects it to be, fix this by creating a simlink (requires root permissions):
ln -s /opt/adobe-air-sdk/runtimes/air/linux/Adobe\ AIR /opt/Adobe\ AIR
  • Adobe AIR will want to check whether the EULA was accepeted and fail in doing so. To fix it, issue the following commands (from under your user, not under root):
mkdir -p ~/.appdata/Adobe/AIR
echo 2 > ~/.appdata/Adobe/AIR/eulaAccepted

Note that by issuing these commands you're accepting Adobe Air's EULA.

Dwarfs F2P

Game does not start

There was a bug that stopped Steam from fetching all the needed files. It should be resolved, if you still bump into this problem, try verifying integrity of game cache from game properties, local files tab.

Game crashes

In some cases, the game crashes about 2 minutes before the end of every arcade. This bug has been reported, but there's no known solution to it.

FTL: Faster than Light


Libraries are downloaded and and placed in the game's data directory for both architectures. As long as you run FTL by the launcher script (or via the shortcut in Steam) you should not need to download any further libraries.


After installation, FTL may fail to run due to a 'Text file busy' error (characterised in Steam by your portrait border going green then blue again). The easiest way to mend this is to just reboot your system. Upon logging back in FTL should run.

The Steam overlay in FTL does not function as it is not a 3D accelerated game. Because of this the desktop notifications will be visible. If playing in fullscreen, therefore, these notifications in some systems may steal focus and revert you back to windowed mode with no way of going back to fullscreen without relaunching. The binaries for FTL on Steam have no DRM and it is possible to run the game without Steam running, so in some cases that may be optimum - just ensure that you launch FTL via the launcher script in ~/.steam/root/SteamApps/common/FTL Faster than Light/data/ rather than the FTL binary in the $arch directory.

Problems with open-source video driver

FTL may fail to run if you are using an opensource driver for your video card. There are two solutions: install a proprietary video driver or delete (rename if you are unsure) the library "libstdc++.so.6" inside ~/.steam/root/SteamApps/common/FTL\ Faster\ Than\ Light/data/amd64/lib This is if you are using a 64bit system, I suppose that in case you are using a 32bit system you have to remove (rename) the same library located into ~/.steam/root/SteamApps/common/FTL\ Faster\ Than\ Light/data/x86/lib.

Harvest: Massive Encounter


Game refuses to launch and throws you to library installer loop. Just edit ~/.steam/root/SteamApps/common/Harvest Massive Encounter/run_harvest and remove everything but

 exec ./Harvest

Killing Floor

Screen resolution

Killing Floor runs pretty much from scratch, although you might have to change in-game resolution screen as the default one is 800x600 and a 4:3 screen format. If you try to modify screen resolution in-game, it might crash your desktop enviroment. To fix this, please set the desired resolution screen size by modifing your ~/.killingfloor/System/KillingFloor.ini with your prefered editor.

# nano ~/.killingfloor/System/KillingFloor.ini




Note: Replace all the ???? with the corresponding numbers according the desired resolution. If you have an 1366x768 screen and want to use it at it's fullest, change all the Viewport fields to something like ViewportX=1366 and ViewportY=768 in the corresponding areas.
Note: The dots in the middle indicate that there are more fields in that .ini file. But for screen resolution troubleshooting, you do not need to modify anything else.

Save the file and restart the game, it should work now.

Windowed Mode

Uncheck fullscreen in the options menu, and use Template:Keypress to stop mouse capturing (that was non-obvious to discover..). This way you can easily minimize it and do other other things..and let your WM handle things.



Game will not launch without lib32-openal.

Penumbra: Overture


(Taken from penumbra-collectionAUR and penumbra-overture-ep1-demoAUR)

Windowed Mode

There is no in-game option to change to the windowed mode, you will have to edit ~/.frictionalgames/Penumbra/Overture/settings.cfg to activate it. Find FullScreen="true" and change it to FullScreen="false", after this the game should start in windowed mode.

Postal 2

Postal 2 runs without any additional dependencies.

Revenge of the Titans


Serious Sam 3: BFE

No audio

Try running:

# pacman -S lib32-alsa-plugins
# mkdir -p /usr/lib/i386-linux-gnu/alsa-lib/
# ln -s /usr/lib32/alsa-lib/libasound_module_pcm_pulse.so /usr/lib/i386-linux-gnu/alsa-lib/

If that does not work, try tweaking ~/.alsoftrc as proposed by the Steam community (Serious Sam 3: BFE uses OpenAL to output sound). If you are not using Pulse Audio, you may want to write the following configuration:

$ nano ~/.alsoftrc
drivers = alsa
device = default
capture = default
mmap = true


Game crash

The shipped x86 version of Spacechem does not work on x64 with the game's own libSDL* files, and crashes with some strange output.

To solve this just remove or move the three files libSDL-1.2.so.0, libSDL_image-1.2.so.0, libSDL_mixer-1.2.so.0 from ~/.steam/root/SteamApps/common/SpaceChem

Space Pirates and Zombies

No audio

Apply the fix documented in Serious Sam 3: BFE above.


Splice comes with both x86 and x64 binaries. Steam does not have to be running to launch this game.


Steel Storm: Burning Retribution

Start with black screen

The game tries to launch in 1024x768 resolution with fullscreen mode by default. It is impossible on some devices. (for example laptop Samsung Series9 with intel hd4000 video).

You can launch the game in windowed mode. To do this open game Properties in Steam, in General tab select "Set launch options..." and type "-window".

Now you can change the resolution in game.

No English fonts

If you use intel video card, just disable S3TC in DriConf.

Superbrothers: Sword & Sworcery EP


Team Fortress 2

No audio

It happens if there is no PulseAudio in your system. If you want to use ALSA, you need to launch Steam or the game directly with SDL_AUDIODRIVER=alsa (From SteamCommunity).

If it still does not work, you may also need to set the environment variable AUDIODEV. For instance AUDIODEV=Live. Use aplay -l to list the available sound cards.

The Book of Unwritten Tales

If the game does not start, go to Properties --> Uncheck "Enable Steam Community In-Game".

The game may segfault upon clicking the Setting menu and possibly during or before gameplay. This is a known problem and you will unfortunately have to wait for a fix from the developer. A workaround (taken from the steam forums) is to replace the game's RenderSystem_GL.so with one from debian's repositories. To do that download this deb file, extract it and replace the following file:

~/.local/share/Steam/SteamApps/common/The Book of Unwritten Tales/lib/32/RenderSystem_GL.so

with the one that comes with the .deb package.


The Clockwork Man


Trine 2

  • If colors are wrong with FOSS drivers (r600g at least), try to run the game in windowed mode, rendering will be corrected. (bugreport)
  • If sound plays choppy, try to edit /etc/openal/alsoft.conf with values
  • If the game resolution is wrong when using a dual monitor setup and you can't see the whole window edit ~/.frozenbyte/Trine2/options.txt and change the options ForceFullscreenWidth and ForceFullscreenHeight to the resolution of your monitor on which you want to play the game.

Unity of Command

  • If squares are shown instead of text, try removing $HOME/Steam/SteamApps/common/Unity of Command/bin/libpangoft2-1.0.so.0.

World of Goo

Changing Resolution
  • To change the game resolution edit the section "Graphics display" in the configuration file $HOME/Steam/SteamApps/common/World of Goo/properties/config.txt. For example, see below:
 <param name="screen_width" value="1680" />
 <param name="screen_height" value="1050" />
 <param name="color_depth" value="0" />
 <param name="fullscreen" value="true" />
 <param name="ui_inset" value="10" />

Skins for Steam

The Steam interface can be fully customized by copying its various interface files in its skins directory and modifying them.

Steam Skin Manager

The process of applying a skin to Steam can be greatly simplified using steam-skin-managerAUR from the AUR. The package also comes with a hacked version of the Steam launcher which allows the window manager to draw its borders on the Steam window.

As a result, skins for Steam will come in two flavors, one with and one without window buttons. The skin manager will prompt you whether you use the hacked version or not, and will automatically apply the theme corresponding to your GTK theme if it is found. You can of course still apply another skin if you want.

The package ships with two themes for the default Ubuntu themes, Ambiance and Radiance. A Faience theme is under development and already has its own package on the AUR steam-skin-faience-gitAUR.

Steam on Wine

Install wine from the official repositories and follow the instructions provided in the article.

Install the required Microsoft fonts ttf-microsoft-tahomaAUR and ttf-ms-fontsAUR from the AUR or through winetricks-svnAUR.

Note: If you have access to Windows discs, you may want to install ttf-win7-fontsAUR instead.

If you have an old Wine prefix (~/.wine), you should remove it and let Wine create a new one to avoid problems (you can transfer over anything you want to keep to the new Wine prefix).


Download and run the Steam installer from steampowered.com. It is no longer an .exe file so you have to start it with msiexec:

$ msiexec /i SteamInstall.msi

Starting Steam

On x86:

$ wine ~/.wine/drive_c/Program\ Files/Steam/Steam.exe

On x86_64 (with steam installed to a clean wine prefix):

$ wine ~/.wine/drive_c/Program\ Files\ \(x86\)/Steam/Steam.exe

Alternatively, you may use this method:

$ wine "C:\\Program Files\\Steam\\steam.exe" 

You should consider making an alias to easily start steam (and put it in your shell's rc file), example:

alias steam='wine ~/.wine/drive_c/Program\ Files\ \(x86\)/Steam/Steam.exe >/dev/null 2>&1 &'
Note: If you are using an nvidia card through bumblebee, you should prefix those commands with optirun.



Consider disabling wine debugging output by adding this to your shell rc file:

export WINEDEBUG=-all

or, just add it to your steam alias to only disable it for steam:

alias steam='WINEDEBUG=-all wine ~/.wine/drive_c/Program\ Files\ \(x86\)/Steam/Steam.exe >/dev/null 2>&1 &'

Additionally, Source games rely on a paged pool memory size specification for audio, and WINE by default does not have this set. To set it:

wine reg add "HKLM\\System\\CurrentControlSet\\Control\\Session Manager\\Memory Management\\" /v PagedPoolSize /t REG_DWORD /d 402653184 /f

Application Launch Options

Go to "Properties" -> "Set Launch Options", e.g.:

-console -dxlevel 90 -width 1280 -height 1024
  • console

Activate the console in the application to change detailed applications settings.

  • dxlevel

Set the application's DirectX level, e.g. 90 for DirectX Version 9.0. It is recommended to use the video card's DirectX version to prevent crashes. See the official Valve Software Wiki http://developer.valvesoftware.com/wiki/DirectX_Versions for details.

  • width and height

Set the screen resolution. In some cases the graphic settings are not saved in the application and the applications always starts in the default resolution. Please refer to http://developer.valvesoftware.com/wiki/Launch_options for a complete list of launch options.

Using a Pre-Existing Steam Install

If you have a shared drive with Windows, or already have a Steam installation somewhere else, you can simply symlink the Steam directory to ~/.wine/drive_c/Program Files/Steam/ . However, be sure to do all the previous steps in this wiki. Confirm Steam launches and logs into your account, then do this:

cd ~/.wine/drive_c/Program\ Files/ 
mv Steam/ Steam.backup/   (or you can just delete the directory)
ln -s /mnt/windows_partition/Program\ Files/Steam/
Note: If you have trouble starting Steam after symlinking the entire Steam folder, try linking only the steamapps subdirectory in your existing wine steam folder instead.
Note: If you still have trouble starting games, use sudo mount --bind /path/to/SteamApps ~/.local/share/Steam/SteamApps -ouser=your-user-name , this is the only thing that worked for me with TF2

Running Steam in a second X Server

Assuming you are using the script above to start Steam, make a new script, called x.steam.sh. You should run this when you want to start Steam in a new X server, and steam.sh if you want Steam to start in the current X server.

If due to misconfiguration a black screen is shown, you could always close down the second X server by pressing Template:Keypress + Template:Keypress + Template:Keypress.



xinit $HOME/steam.sh $* -- :1

Now you can use Template:Keypress + Template:Keypress + Template:Keypress to get to your first X server with your normal desktop, and Template:Keypress + Template:Keypress + Template:Keypress to go back to your game.

Because the second X server is only running the game and the first X server with all your programs is backgrounded, performance should increase. In addition, it is much more convenient to switch X servers while in game to access other resources, rather than having to exit the game completely or Template:Keypress-Template:Keypress out. Finally, it is useful for when Steam or WINE goes haywire and leaves a bunch of processes in memory after Steam crashes. Simply Template:Keypress + Template:Keypress + Template:Keypress on the second X server to kill that X and all processes on that desktop will terminate as well.

If you get errors that look like "Xlib: connection to ":1.0" refused by server" when starting the second X: You will need to adjust your X permissions.

If you lose the ability to use the keyboard while using Steam: This is an odd bug that does not happen with other games. A solution is to use a WM in the second X as well. Thankfully, you do not need to run a large WM. Openbox and icewm have been confirmed to fix this bug (evilwm, pekwm, lwm do not work), but the icewm taskbar shows up on the bottom of the game, thus it's recommended to use Openbox. Install openbox from the official repositories, then add openbox & to the top of your steam.sh file. Note you can run other programs (ex. Teamspeak &) or set X settings (ex. xset, xmodmap) before the WINE call as well.

Steam Links in Firefox, Chrome, Etc

To make steam:// urls in your browser connect with steam in wine, there are several things you can do. One involves making steam url-handler keys in gconf, another involves making protocol files for kde, others involve tinkering with desktop files or the Local State file for chromium. These seem to only work in firefox or under certain desktop configurations. One way to do it that works more globally is using mimeo, a tool made by Xyne (an Arch TU) which follows. For another working and less invasive (but firefox-only) way, see the first post here .

  • Make /usr/bin/steam with your favorite editor and paste:
# Steam wrapper script
exec wine "c:\\program files\\steam\\steam.exe" "$@"
  • Make it executable.
# chmod +x /usr/bin/steam
  • Create ~/.config/mimeo.conf with your favorite editor and paste:
/usr/bin/steam %u
  • Lastly, open /usr/bin/xdg-open in your favorite editor. Go to the detectDE() section and change it to look as follows:
    #if [ x"$KDE_FULL_SESSION" = x"true" ]; then DE=kde;
    #elif [ x"$GNOME_DESKTOP_SESSION_ID" != x"" ]; then DE=gnome;
    #elif `dbus-send --print-reply --dest=org.freedesktop.DBus /org/freedesktop/DBus org.freedesktop.DBus.GetNameOwner string:org.gnome.SessionManager > /dev/null 2>&1` ; then DE=gnome;
    #elif xprop -root _DT_SAVE_MODE 2> /dev/null | grep ' = \"xfce4\"$' >/dev/null 2>&1; then DE=xfce;
    #elif [ x"$DESKTOP_SESSION" == x"LXDE" ]; then DE=lxde;
    #else DE=""
  • Restart the browser and you should be good to go. In chromium, you cannot enter a steam:// link in the url box like you can with firefox. The forum link above has a steam://open/friends link to try if needed.
Note: If you have any problems with file associations after doing this, simply revert to regular xdg-utils and undo your changes to /usr/bin/xdg-open.
Note: Those on other distributions that stumble upon this page, see the link above for firefox specific instructions. No easy way to get it working on Chromium on other distros exists.

No text rendered problem

If there is no text/font rendered when starting steam you should try to start steam with the parameter -no-dwrite. Read more in the forum thread about it.

wine ~/.wine/drive_c/Program\ Files\ \(x86\)/Steam/Steam.exe -no-dwrite

See Also