Syncthing is an open-source file synchronization client/server application, written in Go, implementing its own, equally free Block Exchange Protocol. All transit communications between syncthing nodes are encrypted using TLS, and all nodes are uniquely identified with cryptographic certificates.
- 1 Installation
- 2 Running Syncthing
- 3 Configuration
- 4 Participate in the infrastructure
- 5 Tips and tricks
- 6 Troubleshooting
Install the package.
syncthing binary manually from a terminal. The multiple optional parameters are described in .
Running Syncthing as a system service ensures that it is running at startup even if the user has no active session, it is intended to be used on a server.
Enable and start the
firstname.lastname@example.org where myuser is the actual name of your user.
Running Syncthing as a user service ensures that Syncthing only starts after the user has logged into the system (e.g., via the graphical login screen, or ssh). Thus, the user service is intended to be used on a (multiuser) desktop computer. To use the user service, start/enable the user unit
syncthing.service (i.e. with the
GTK+ graphical user interface, desktop notifications and integration with the file managers Nautilus, Nemo and Caja. Syncthing can be launched by Syncthing-GTK: use the interface settings to run syncthing-gtk at startup, and to state whether to launch the syncthing daemon.provides a
Syncthing provides a web interface accessible by default on http://localhost:8384.
After installation Syncthing already has a proper start-up configuration. You may now add new servers and/or folders by visiting the web interface. For detailed instructions on how to set up a simple network, read Syncthing's getting started.
After a successful first start, it will create the default repository at
~/Sync. You can see this in the web admin interface. On the right is the list of nodes you have added. On the left is the list of repositories, which are folders you can choose to share with other nodes.
To add another node, click "Add Node" underneath the list of nodes. You will be prompted for their Node ID (which can be found on the other machine by clicking
Edit > Show ID) as well as a short name and the address.
If you specify "dynamic" for the address, the syncthing announce server will be used to automatically exchange addresses between nodes. If you want to know more about Node IDs, including the cryptographic implications, you can read the appropriate Syncthing documentation page.
After saving the configuration, you will be prompted to restart the syncthing server, and once restarted, the changes will be applied.
Next, you can either change the configuration of the default node (click its name and then
Edit), or create a new one to share data with. Simply tick the node you wish to share the data with, and they will have permission to access it.
Local network setup
In the typical case several machines, like laptops and androids, share a local area network (LAN) behind a network address translation (NAT) router, it is advised for a versatile configuration to:
- Activate both local and global discovery on each node to allow discovery in all situations, including when a mobile device leaves the LAN and connects to the internet from the outside,
- Use a different listen address port for each machine, like
tcp://:22012and so forth. This will differentiate them on the global discovery servers and avoid the "Connected to myself - should not happen" message on the other local devices whenever they leave the NAT.
- Enable if possible UPnP port forwarding or manually forward each port. When a new node is discovered, Syncthing tries to use its listening port. If this port happens to be closed, it will seek an open port locally: whenever NAT traversal is enabled in Syncthing, it will attempt to use UPnP to map a random external port to the internal listening port chosen, for example 22010. If this is not desirable or not possible, each port should be manually forwarded to the right machine on the LAN. Eventually, if no open port can be found on both sides, relaying will be used.
inotify (inode notify) is a Linux kernel subsystem that acts to extend filesystems to notice changes to the filesystem, and report those changes to applications. The inotify functionality is integrated in Syncthing and can be enabled in the advanced configuration menu for individual folders. The setting is located at: Actions > Advanced > (click on the folder button you want) > FS Watcher Enabled. It is expected to be exposed in the folder configuration UI in the near future.
Alternatively, inotify support is provided bybut in this case inotify will only work while the GUI is running.
fs.inotify.max_user_watchesvalue, by appending the following line:
Participate in the infrastructure
One can participate in the Syncthing infrastructure by running a global discovery server or a relay server.
Running a relay
Syncthing has the ability to connect two devices via a relay when it is not possible to establish a direct connection between them. Relayed connections are end-to-end encrypted in the usual manner, so the relay has no insight into the connection other than the knowledge of the IP addresses and device IDs.
Anyone can run a relay server and it will automatically join the Syncthing relay pool and be available to all Syncthing's users. To run your own relay, install and Start/Enable
syncthing-relaysrv.service. Rate limiting and other options can be configured via the command line. These options can be set in the
ExecStart directive of the service drop-in file as follows:
[Service] ExecStart= ExecStart=/usr/bin/syncthing-relaysrv -global-rate 500000 -provided-by relayprovidername
-status-srvoptions if necessary.
Running a discovery server
Global discovery is used by Syncthing to find peers on the internet. Any device announces itself at startup to the discovery server which stores the device ID, IP address, port and current time. Then on request, for a given device ID, it returns the information stored in JSON format, for instance.
As an example, the request
The discovery server requires certificates to run, which should ideally be placed in
/var/discosrv. The user/group
syncthing needs permissions to be able to read the certificate files. You need to edit the systemd unit file to correctly point to the certificates (and to undertake any other configuration change you may want, see list).
[Unit] Description=Syncthing discovery server After=network.target [Service] User=syncthing Group=syncthing ExecStart=/usr/bin/syncthing-discosrv -db-dsn /var/discosrv/discosrv.db -cert /var/discosrv/cert.pem -key /var/discosrv/key.pem Restart=on-failure SuccessExitStatus=2 PrivateDevices=true ProtectSystem=full ProtectHome=true NoNewPrivileges=true [Install] WantedBy=multi-user.target
To point the client to your discovery server, change the
Global Discovery Servers variable under Settings to
https://yourserver:8443/ (default port) or whatever port you have reconfigured to. The variable takes a comma-separated list of discovery servers. It is possible to include multiple ones, including the default one.
If you are using self-signed certificates, the client refuses to connect unless you append the discovery server ID to its domain. The ID is printed to stdout upon launching the discovery server. Amend the Global Discovery Servers entry to add the ID:
Tips and tricks
Stop journal spam
Syncthing can be quite noisy even while it is not doing anything. The service ExecStart can be overridden to filter output directly without an extra script (adjust "grep" as needed):
[Service] ExecStart= ExecStart=/bin/bash -c 'set -o pipefail; /usr/bin/syncthing -no-browser -no-restart -logflags=0 | grep -v "INFO: "'
Run in VirtualBox
It is possible to have Syncthing connect both locally and globally within a VirtualBox virtual machine (VM) while keeping its network adapter in the standard NAT mode (as opposed to bridged networking attached to the host computer's adapter).
To enable this mode, Syncthing should listen to a port in the VM different from the listening port already used by the host.
For example, if the default 22000 port is used by the host, one could use 22001 in the VM.
The listening port in the VM can be changed through Syncthing's Sync Protocol Listen Addresses to
tcp://:22001 in the GUI Settings.
The 22001/TCP port of the host must be forwarded to the guest in this configuration. This can be done with the following command:
$ VBoxManage modifyvm myvmname --natpf1 "syncthing,tcp,,22001,,22001"
In this setup, relaying should not be necessary: local devices can connect to the VM on port 22001 while global devices are accessible as long as they have themselves an open port.
Running through a proxy
Syncthing can be run through a proxy to enable use behind a corporate firewalls or tunneling via SSH. According to the using proxies documentation it is necessary to set the
all_proxy environment variable, and it must indicate a socks5 proxy type.
- If the service is run from a script or from the command line, you must set the variables beforehand as follows:
export all_proxy="socks5://proxy_address:proxy_port" export no_proxy="127.0.0.1"
- If it is run as a service, you must define the variables in the service configuration file as follows:
[Service] Environment="all_proxy=socks5://proxy_address:proxy_port" Environment="no_proxy=127.0.0.1"
You must then reload systemd daemons configurations:
# systemctl daemon-reload
and restart the
See Debugging Syncthing.