Syslinux is a collection of boot loaders capable of booting from hard drives, CDs and over the network via PXE. It supports the fat, ext2, ext3, ext4 and btrfs file systems.
- 1 Syslinux Boot Process
- 2 Installation
- 3 Configuring syslinux
- 4 Troubleshooting
- 5 External link
Syslinux Boot Process
At boot, the computer loads the MBR (Template:Filename). Then the MBR looks for the partition that is marked as active (boot flag). Once found, the volume boot record (VBR) will be executed. In the case of ext2/3/4 and fat12/16/32, the starting sector of Template:Filename is hard-coded into the VBR. The VBR will execute (Template:Filename). Therefore, if the location of Template:Filename changes, syslinux will no longer boot. In the case of btrfs, the above method will not work since files move around resulting in the sector location of Template:Filename changing. Therefore, the entire Syslinux code needs to be stored outside the filesystem. The code is stored in the sectors following the VBR. Once Syslinux is fully loaded, it looks for a configuration file, either Template:Filename or Template:Filename. If one is found, the configuration file is loaded. If no configuration file is found you will be given a syslinux prompt.
Automatic Install - syslinux
The syslinux-install_update script will install Syslinux, copy COM32 modules to Template:Filename, set the boot flag and install the MBR. It can handle MBR and GPT disks along with softraid.
1. Install Syslinux
pacman -Syu syslinux
2. Make sure Template:Filename is mounted
3. Run syslinux-install_update script -i (install) -a (set boot flag) -m (install mbr)
4. Edit Template:Filename
Manual Install - syslinux
# fdisk -l /dev/sda
# sgdisk -l /dev/sda
will show " GPT: not present" if it is not a GPT disk.
Make sure you have the syslinux package installed. Then install Syslinux onto your boot partition, which must contain a fat, ext2, ext3, ext4, or btrfs file system.
# mkdir /boot/syslinux # extlinux --install /boot/syslinux #run on a mounted directory (not /dev/sdXY) /boot/syslinux/ is device /dev/sda1
MBR Partition Table
Next, you need mark your boot partition active in your partition table. Applications capable of doing this include fdisk, cfdisk, sfdisk, (g)parted. It should look like this:
# fdisk -l /dev/sda [...] Device Boot Start End Blocks Id System /dev/sda1 * 2048 104447 51200 83 Linux /dev/sda2 104448 625142447 312519000 83 Linux
Install the master boot record:
# dd bs=440 conv=notrunc count=1 if=/usr/lib/syslinux/mbr.bin of=/dev/sda
GUID Partition Table aka GPT
Main article GUID_Partition_Table
Bit 2 of the attributes for the /boot partition need to be set.
# sgdisk /dev/sda --attributes=1:set:2
This would toggle the attribute legacy bios bootable on partition 1
# sgdisk /dev/sda --attributes=1:show 1:2:1 (legacy BIOS bootable)
Install the master boot record:
# dd bs=440 conv=notrunc count=1 if=/usr/lib/syslinux/gptmbr.bin of=/dev/sda
When you reboot your system now, you will have a syslinux prompt. To automatically boot your system or get a boot menu, you still need to create a configuration file.
The syslinux configuration file, Template:Filename should be created in the same directory where you installed syslinux. In our case '/boot/syslinux/'
- Instead of LINUX, the keyword KERNEL can also be used. KERNEL tries to detect the type of the file, while LINUX always expects a Linux kernel.
- TIMEOUT value is in units of 1/10 of a second.
Basic Syslinux Config
This is a simple configuration file that will show a boot: prompt and automatically boot after 5 seconds.
PROMPT 1 TIMEOUT 50 DEFAULT arch LABEL arch LINUX ../vmlinuz26 APPEND root=/dev/sda2 ro INITRD ../kernel26.img LABEL archfallback LINUX ../vmlinuz26 APPEND root=/dev/sda2 ro INITRD ../kernel26-fallback.img
If you want to boot directly without seeing a prompt, set PROMPT to 0.
Syslinux also allows you to use a boot menu. To use it, copy the menu COM32 module to your syslinux folder:
# cp /usr/lib/syslinux/menu.c32 /boot/syslinux/
If /boot is in the same partition as /usr, a symlink will also work:
# ln -s /usr/lib/syslinux/menu.c32 /boot/syslinux/
UI menu.c32 PROMPT 0 MENU TITLE Boot Menu TIMEOUT 50 DEFAULT arch LABEL arch MENU LABEL Arch Linux LINUX ../vmlinuz26 APPEND root=/dev/sda2 ro INITRD ../kernel26.img LABEL archfallback MENU LABEL Arch Linux Fallback LINUX /vmlinuz26 APPEND root=/dev/sda2 ro INITRD /kernel26-fallback.img
For more details about the menu system, see http://git.kernel.org/?p=boot/syslinux/syslinux.git;a=blob;f=doc/menu.txt.
Syslinux also allows you to use a graphical boot menu. To use it, copy the vesamenu COM32 module to your syslinux folder:
# cp /usr/lib/syslinux/vesamenu.c32 /boot/syslinux/
If /boot is the same partition as /, a symlink will also work:
# ln -s /usr/lib/syslinux/vesamenu.c32 /boot/syslinux/
This config uses the same menu design as the Arch Install CD: syslinux.cfg
The background file can be found here: splash.png
UI vesamenu.c32 DEFAULT arch PROMPT 0 MENU TITLE Boot Menu MENU BACKGROUND splash.png TIMEOUT 50 MENU WIDTH 78 MENU MARGIN 4 MENU ROWS 5 MENU VSHIFT 10 MENU TIMEOUTROW 13 MENU TABMSGROW 11 MENU CMDLINEROW 11 MENU HELPMSGROW 16 MENU HELPMSGENDROW 29 # Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu MENU COLOR border 30;44 #40ffffff #a0000000 std MENU COLOR title 1;36;44 #9033ccff #a0000000 std MENU COLOR sel 7;37;40 #e0ffffff #20ffffff all MENU COLOR unsel 37;44 #50ffffff #a0000000 std MENU COLOR help 37;40 #c0ffffff #a0000000 std MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std MENU COLOR msg07 37;40 #90ffffff #a0000000 std MENU COLOR tabmsg 31;40 #30ffffff #00000000 std LABEL arch MENU LABEL Arch Linux LINUX ../vmlinuz26 APPEND root=/dev/sda2 ro INITRD ../kernel26.img LABEL archfallback MENU LABEL Arch Linux Fallback LINUX ../vmlinuz26 APPEND root=/dev/sda2 ro INITRD ../kernel26-fallback.img
Since Syslinux 3.84 vesamenu.c32 supports the "MENU RESOLUTION $WIDTH $HEIGHT" directive. To use it, insert "MENU RESOLUTION 1440 900" into your config for a 1440x900 resolution. The background picture has to have exactly the right resolution however as syslinux will otherwise refuse to load the menu.
If you want to chainload other operating systems (such as Windows) or boot loaders, copy (or symlink) the chain.c32 module to the syslinux folder (for details, see the instructions in the previous section). Then, create a section in the configuration file:
LABEL windows MENU LABEL Windows COM32 chain.c32 APPEND hd0 3
hd0 3 is the third partition on the first BIOS drive - drives are counted from zero, but partitions are counted from one. For more details about chainloading, see .
If you have grub2 installed in your boot partition, you can chainload it by using:
LABEL grub2 MENU LABEL Grub2 COM32 chain.c32 append file=../grub/boot.img
This maybe required for booting from iso images.
Use this LABEL section to launch memtest (install the memtest86+ package):
LABEL memtest MENU LABEL Memtest86+ LINUX /memtest86+/memtest.bin
Add /boot infront of /memtest86+/ if you have /boot on the same partition as /..
HDT (Hardware Detection Tool) displays hardware information. Like before, the .c32 file has to be copied or symlinked from /boot/syslinux/. For pci info either copy or symlink Template:Filename to Template:Filename
LABEL hdt MENU LABEL Hardware Info COM32 hdt.c32
Reboot and power off
Use the following sections to reboot or power off your machine.
LABEL reboot MENU LABEL Reboot COM32 reboot.c32 LABEL poweroff MENU LABEL Power Off COMBOOT poweroff.com
I have a Syslinux Prompt - Yikes!
You can type in the LABEL name of the entry that you want to boot (as per your syslinux.cfg). If you used the example configs just type
If you get an error that the config file could not be loaded you can pass your needed boot parameters
boot: vmlinuz26 root=/dev/sda2 ro initrd=/kernel26.img
If you don't have access to 'boot:' in ramfs, and therefore temporarly unable to boot kernel again
1) create temp directory, in order to mount your root partition
mkdir -p /new_root
2) mount / under /new_root (in case /boot/ is on same partition, otherwise you'll need to mount them both)
mount /dev/sd[a-z][1-9] /new_root
3) use 'vi' and edit syslinux.cfg again to suit your needs and save file;
No Default or UI found on some computers
Certain motherboard manufacturers have less compatibility for booting from usb devices than others. While a ext4 formatted usb drive may boot on a more recent computer, some computers may hang if the boot partition containing the kernel and initrd are not on a fat16 partition. to prevent an older machine from loading ldlinux and failing to read syslinux.cfg, use cfdisk to create a fat-16 partition (<=2GB) and format with
# pacman -S dosfstools # mkfs.msdos -F 16 /dev/sda1
then install and configure syslinux.
Windows boots up! No Syslinux!
Solution: Make sure the partition that contains /boot has the boot flag enabled. Also, make sure the boot flag is not enabled on the windows partition. See the installation section above.
The MBR that comes with syslinux looks for the first active partition that has the boot flag set. The windows partition was likely found first and had the boot flag set. If you wanted you could use the MBR that windows or msdos fdisk provides.
Menu Entries do nothing
You select a menu entry and it does nothing. It "refreshes" the menu
This usually means that you have an error in your configuration. Hit Template:Keypress to edit your boot parameters. Alternatively, press Template:Keypress and type in the LABEL of your boot entry (Example: arch)
Can't remove ldlinux.sys
ldlinux.sys has the immutable attribute set which prevents the file from being deleted or overwritten. This is because the sector location of the file must not change or else syslinux has to be reinstalled. To remove:
chattr -i /boot/syslinux/ldlinux.sys rm /boot/syslinux/ldlinux.sys
- The Syslinux Project's website.