Difference between revisions of "Systemd-boot"

From ArchWiki
Jump to navigation Jump to search
m (update links)
m (→‎LVM root installations: - Added warning for LVM and /boot)
Line 103: Line 103:
==== LVM root installations ====
==== LVM root installations ====
{{Warning|Systemd-boot cannot be used without a separate /boot filesystem outside of LVM.}}
Here is an example for a root partition using [[LVM|Logical Volume Management]]:
Here is an example for a root partition using [[LVM|Logical Volume Management]]:

Revision as of 00:43, 18 November 2015


systemd-boot (previously called gummiboot), is a simple UEFI boot manager which executes configured EFI images. The default entry is selected by a configured pattern (glob) or an on-screen menu. It is included with systemd since systemd 220-2.

It is simple to configure, but can only start EFI executables, such as the Linux kernel EFISTUB, UEFI Shell, GRUB, the Windows Boot Manager, and such.

Warning: systemd-boot simply provides a boot menu for EFISTUB kernels. In case you have issues booting EFISTUB kernels like in FS#33745, you should use a boot loader which does not use EFISTUB, like GRUB, Syslinux or ELILO.
Note: In the entire article $esp denotes the mountpoint of the EFI System Partition aka ESP.


EFI boot

First, make sure you are booted in UEFI mode, your EFI variables are accessible, your EFI System Partition is properly mounted and your kernel and initramfs are copied onto that ESP as systemd-boot cannot load EFI binaries from other partitions. It is therefore recommended to mount your ESP to /boot. See #Updating for more information and work-around, in case you want to separate /boot from the ESP.

Finally, type the following command to copy the systemd-boot binary to your EFI System Partition and add systemd-boot itself as the default EFI application (default boot entry) loaded by the EFI Boot Manager. If you are not booted in UEFI mode and your EFI variables are not accessible, creating the boot entry will fail. You should however still be able to boot systemd-boot as it copies the binary to the default EFI binary location on your ESP ($esp/EFI/boot/systemd-bootx64.efi on x64 systems) unless a non-systemd-boot EFI application is already present as the same filename.

# bootctl --path=$esp install

Legacy boot

Warning: This is not the recommended process

You can also successfully install systemd-boot if booted with a legacy OS. However, this requires that you later on tell your firmware to launch systemd-boot's EFI file on boot:

  • you either have a working EFI shell somewhere;
  • or your firmware interface provides you with a way of properly setting the EFI file that will be loaded at boot time.
Note: E.g. on Dell's Latitude series, the firmware interface provides everything you need to setup EFI boot, and the EFI Shell won't be able to write to the computer's ROM.

If you can do so, the installation is easier: go into your EFI shell or your firmware configuration interface, and change your machine's default EFI file to /$esp/EFI/boot/systemd-bootx64.efi (systemd-bootia32.efi on i686 systems).


systemd-boot (bootctl(1), systemd-efi-boot-generator(8)) assumes that your EFI System Partition is mounted on /boot. Unlike the previous separate gummiboot package, which updated automatically on a new package release with a post_install script, updates of new systemd-boot versions are now handled manually by the user:

# bootctl update  

If the ESP is not mounted on /boot, the --path= option can pass it. For example:

# bootctl --path=/boot/$esp update


Basic configuration

The basic configuration is kept in $esp/loader/loader.conf, with three possible configuration options:

  • default – default entry to select (without the .conf suffix); can be a wildcard like arch-*
  • timeout – menu timeout in seconds. If this is not set, the menu will only be shown when you hold the space key while booting.
  • editor - whether to enable the kernel parameters editor or not. 1 (default) is to enable, 0 is to disable. Since the user can add init=/bin/bash to bypass root password and gain root access, it's strongly recommended to set this option to 0.


default  arch
timeout  4
editor   0

Note that the first 2 options can be changed in the boot menu itself, which will store them as EFI variables.

Adding boot entries

Note: bootctl will automatically check for "Windows Boot Manager" (\EFI\Microsoft\Boot\Bootmgfw.efi), "EFI Shell" (\shellx64.efi) and "EFI Default Loader" (\EFI\Boot\bootx64.efi). Where detected, entries will also automatically be generated for them as well. However, it does not auto-detect other EFI applications (unlike rEFInd), so for booting the kernel, manual configuration entries must be created. If you dual-boot Windows, it is strongly recommended to disable its default Fast Start-Up option.
Tip: You can find the PARTUUID for your Root partition with the command blkid -s PARTUUID -o value /dev/sdxY, where 'x' is the device letter and 'Y' is the partition number. This is required only for your Root partition, not $esp.

bootctl searches for boot menu items in $esp/loader/entries/*.conf – each file found must contain exactly one boot entry. The possible options are:

  • title – operating system name. Required.
  • version – kernel version, shown only when multiple entries with same title exist. Optional.
  • machine-id – machine identifier from /etc/machine-id, shown only when multiple entries with same title and version exist. Optional.
  • efi – EFI program to start, relative to your ESP ($esp); e.g. /vmlinuz-linux. Either this or linux (see below) is required.
  • options – command line options to pass to the EFI program. Optional, but you will need at least initrd=efipath and root=dev if booting Linux.

For Linux, you can specify linux path-to-vmlinuz and initrd path-to-initramfs; this will be automatically translated to efi path and options initrd=path – this syntax is only supported for convenience and has no differences in function.

Standard root installations

Here is an example entry for a root partition without LVM or LUKS:

title          Arch Linux
linux          /vmlinuz-linux
initrd         /initramfs-linux.img
options        root=PARTUUID=14420948-2cea-4de7-b042-40f67c618660 rw

Please note in the example above that PARTUUID/PARTLABEL identifies a GPT partition, and differs from UUID/LABEL, which identifies a filesystem. Using the PARTUUID/PARTLABEL is advantageous because it is invariant (i.e. unchanging) if you reformat the partition with another filesystem, or if the /dev/sd* mapping changed for some reason. It is also useful if you do not have a filesystem on the partition (or use LUKS, which does not support LABELs).

LVM root installations

Warning: Systemd-boot cannot be used without a separate /boot filesystem outside of LVM.

Here is an example for a root partition using Logical Volume Management:

title          Arch Linux (LVM)
linux          /vmlinuz-linux
initrd         /initramfs-linux.img
options        root=/dev/mapper/<VolumeGroup-LogicalVolume> rw

Replace <VolumeGroup-LogicalVolume> with the actual VG and LV names (e.g. root=/dev/mapper/volgroup00-lvolroot). Alternatively, it is also possible to use a UUID instead:

options  root=UUID=<UUID identifier> rw

Note that root=UUID= is used instead of root=PARTUUID=, which is used for Root partitions without LVM or LUKS.

Encrypted Root Installations

Here is an example configuration file for an encrypted root partition (DM-Crypt / LUKS):

title Arch Linux Encrypted
linux /vmlinuz-linux
initrd /initramfs-linux.img
options cryptdevice=UUID=<UUID>:<mapped-name> root=/dev/mapper/<mapped-name> quiet rw

UUID is used in this example; PARTUUID should be able to replace the UUID, if so desired. You may also replace the /dev path with a regular UUID. See Dm-crypt/System configuration#Boot loader.

You can also add other EFI programs such as \EFI\arch\grub.efi.

btrfs subvolume root installations

If booting a btrfs subvolume as root, amend the options line with rootflags=subvol=<root subvolume>. In the example below, root has been mounted as a btrfs subvolume called 'ROOT' (e.g. mount -o subvol=ROOT /dev/sdxY /mnt):

title          Arch Linux
linux          /vmlinuz-linux
initrd         /initramfs-linux.img
options        root=PARTUUID=14420948-2cea-4de7-b042-40f67c618660 rw rootflags=subvol=ROOT

A failure to do so will otherwise result in the following error message: ERROR: Root device mounted successfully, but /sbin/init does not exist.

EFI Shells or other EFI apps

In case you installed EFI shells and other EFI application into the ESP, you can use the following snippets:

title  UEFI Shell x86_64 v1
efi    /EFI/shellx64_v1.efi
title  UEFI Shell x86_64 v2
efi    /EFI/shellx64_v2.efi

Tango-view-fullscreen.pngThis article or section needs expansion.Tango-view-fullscreen.png

Reason: Add example on how to boot into EFI firmware setup. (Discuss in Talk:Systemd-boot#)

Support hibernation

See Suspend and hibernate.

Keys inside the boot menu

The following keys are used inside the menu:

  • Up/Down - select entry
  • Enter - boot the selected entry
  • d - select the default entry to boot (stored in a non-volatile EFI variable)
  • -/T - decrease the timeout (stored in a non-volatile EFI variable)
  • +/t - increase the timeout (stored in a non-volatile EFI variable)
  • e - edit the kernel command line. has no effect if the editor config option is set to 0.
  • v - show the gummiboot and UEFI version
  • Q - quit
  • P - print the current configuration
  • h/? - help

These hotkeys will, when pressed inside the menu or during bootup, directly boot a specific entry:

  • l - Linux
  • w - Windows
  • a - OS X
  • s - EFI Shell
  • 1-9 - number of entry


Manual entry using efibootmgr

If bootctl install command failed, you can create a EFI boot entry manually using efibootmgr:

# efibootmgr -c -d /dev/sdX -p Y -l /EFI/systemd/systemd-bootx64.efi -L "Linux Boot Manager"

where /dev/sdXY is the EFI System Partition.

Menu does not appear after Windows upgrade

For example, if you upgraded from Windows 8 to Windows 8.1, and you no longer see a boot menu after the upgrade (i.e., Windows boots immediately):

  • Make sure Secure Boot (UEFI setting) and Fast Startup (Windows power option setting) are both disabled.
  • Make sure your UEFI prefers Linux Boot Manager over Windows Boot Manager (UEFI setting like Hard Drive Disk Priority).
Note: Windows 8.x+, including Windows 10, will overwrite any UEFI choices you make and install itself as the priority boot choice after every boot. Changing the boot order in the UEFI firmware will only last until the next Windows 10 boot. Know what the Change Boot Option key is for your motherboard.

To make Windows 8.X and above respect your boot order, you must enter a Windows group policy and have it execute a batch (.bat) file on startup. In Windows:

  1. Open a command prompt with admin privlages. Type in bcdedit /enum firmware
  2. Find the Firmware Application that has "Linux" in the description, e.g. "Linux Boot Manager"
  3. Copy the Identifier, including the brackets, e.g. {31d0d5f4-22ad-11e5-b30b-806e6f6e6963}
  4. Open gpedit and under Local Computer Policy > Computer Configuration > Windows Settings > Scripts(Startup/Shutdown), choose Startup. That should open a window named Startup Properties.
  5. Under the Scripts tab, choose the Add button
  6. Give your script a name, e.g. bootorder.bat.
  7. Under Script Parameters, type bcdedit /set {fwbootmgr} DEFAULT {identifier_copied_in_step_3} (e.g. bcdedit /set {fwbootmgr} DEFAULT {31d0d5f4-22ad-11e5-b30b-806e6f6e6963}).

If this does not work, create a batch file somewhere on your Windows system with the bcdedit /set {fwbootmgr} DEFAULT {identifier_copied_in_step_3} line in it and go back to step 6 and Browse for that file.

Alternatively, you can make the default Windows boot loader load systemd-boot instead. In an administrator command prompt in Windows, one can change this entry as follows:

bcdedit /set {bootmgr} path \EFI\systemd\systemd-bootx64.efi

See also