systemd offers users the ability to run an instance of systemd to manage their session and services. This allows users to start, stop, enable, and disable units found within certain directories when systemd is run by the user. This is convenient for daemons and other services that are commonly run as a user other than root or a special user, such as mpd.
Users should first set up systemd-logind to manage their session. If systemd is running as the system init daemon, then this is already happening.
Next, the user must launch systemd by putting the following in their
systemd --userIf the user is not launching the window manager through systemd --user, then
systemd --user &should be used and launched like anything else in
~/.xinitrc, before execing the window manager.
After starting X, the user can check whether their session is now being managed by systemd-logind with the following command:
$ loginctl --no-pager show-session $XDG_SESSION_ID | grep Active
If this command prints
Active=yes, then the user is now using systemd-logind to manage their session. The user should remove any instances of ck-launch-session or dbus-launch from their
~/.xinitrc, as those commands are unneeded.
All of the major display managers are now using systemd-logind by default, so the
loginctl command from the previous section should work as stated. A user simply has to add
systemd --user as a program to be started by their desktop environment.
GNOME 3 (using GDM)
For users who wish to have GDM/GNOME 3 auto-start their
systemd --user session upon login, they just need to add a special log in session for this:
[Desktop Entry] Type=Application Name=systemd Comment=Runs 'systemd' as a user instance. Exec=/usr/lib/systemd/systemd --user
Make sure to choose the
systemd session option at the GDM login screen.
Using systemd --user To Manage Your Session
Systemd has many amazing features, one of which is the ability to track programs using cgroups (by running
systemctl status). While awesome for a pid 1 process to do, it is also extremely useful for users, and having it set up and initialize user programs, all the while tracking what is in each cgroup is even more amazing.
All of your systemd user units will go to
$HOME/.config/systemd/user. These units take precedence over units in other systemd unit directories.
There are two packages you need to get this working, both currently available from the AUR: AUR and optionally, AUR if you want to have autologin working.
Next is setting up your targets. You should set up two, one for window manager and another as a default target. The window manager target should be populated like so:
[Unit] Description=Window manager target Wants=xorg.target Wants=mystuff.target Requires=dbus.socket AllowIsolate=true [Install] Alias=default.target
This will be the target for your graphical interface.
Put together a second target called
mystuff.target. All services but your window manager should contain a
WantedBy line, under
[Install], pointing at this unit.
[Unit] Description=Xinitrc Stuff Wants=wm.target [Install] Alias=default.target
Link this unit to
default.target. When you start
systemd --user, it will start this target.
Next you need to begin writing services. First you should throw together a service for your window manager:
[Unit] Description=your window manager service Before=mystuff.target After=xorg.target Requires=xorg.target [Service] #Environment=PATH=uncomment:to:override:your:PATH ExecStart=/full/path/to/wm/executable Restart=always RestartSec=10 [Install] WantedBy=wm.target
You can fill your user unit directory with a plethora of services, including ones for mpd, gpg-agent, offlineimap, parcellite, pulse, tmux, urxvtd, xbindkeys and xmodmap to name a few.
If you want to have systemd automatically log you in on boot, then you can use the unit in user-session-units to do so. Enabling a screen locker for will stop someone from booting your computer into a nice, logged in session.
If you installed user-session-units as listed above, then you must copy
/email@example.com) and edit these lines:
As well as an install section:
or if you have no login manager:
Add this line to
session required pam_systemd.so
user-session@.service starts on tty1, you will need to add
Conflictsfirstname.lastname@example.org to the service file, if it doesn't exist already.
Once this is done,
systemctl --user enable
One of the most important things you can add to the service files you will be writing is the use of
After= in the
[Unit] section. These two parts will determine the order things are started. Say you have a graphical application you want to start on boot, you would put
After=xorg.target into your unit. Say you start ncmpcpp, which requires mpd to start, you can put
After=mpd.service into your ncmpcpp unit. You will eventually figure out exactly how this needs to go either from experience or from reading the systemd manual pages. Starting with systemd.unit(5) is a good idea.
Other use cases
Persistent terminal multiplexer
You may wish your user session to default to running a terminal multiplexer, such as GNU Screen or Tmux, in the background rather than logging you in to a window manager session. Separating login from X login is most likely only useful for those who boot to a TTY instead of to a display manager (in which case you can simply bundle everything you start in with myStuff.target).
To create this type of user session, procede as above, but instead of creating wm.target, create multiplexer.target:
[Unit] Description=Terminal multiplexer Documentation=info:screen man:screen(1) man:tmux(1) After=cruft.target Wants=cruft.target [Install] Alias=default.target
mystuff.target above, should start anything you think should run before tmux or screen starts (or which you want started at boot regardless of timing), such as a GnuPG daemon session.
You then need to create a service for your multiplexer session. Here's a sample service, using tmux as an example and sourcing a gpg-agent session which wrote its information to /tmp/gpg-agent-info. This sample session, when you start X, will also be able to run X programs, since DISPLAY is set.
[Unit] Description=tmux: A terminal multiplixer Documentation=man:tmux(1) After=gpg-agent.service Wants=gpg-agent.service [Service] Type=forking ExecStart=/usr/bin/tmux start ExecStop=/usr/bin/tmux kill-server Environment=DISPLAY=:0 EnvironmentFile=/tmp/gpg-agent-info [Install] WantedBy=multiplexer.target
Once this is done,
systemctl --user enable
multiplexer.target and any services you created to be run by
cruft.target and you should be set to go! Activated
user-session@.service as described above, but be sure to remove the
user-session@.service, since your user session will not be taking over a TTY. Congratulations! You have a running terminal multiplexer and some other useful programs ready to start at boot!
You've probably noticed that, since the terminal multiplexer is now
default.target, X will not start automatically at boot. To start X, procede as above, but do not activate or manually link to
wm.target. Instead, assuming you're booting to a terminal, we'll simply be using a hackish workaround and masking
/usr/bin/startx with a shell alias:
alias startx='systemctl --user start wm.target'
Users may now interact with units located in the following directories just as they would with system services (ordered by ascending precedence):
To control the systemd instance, the user must use the command
Installed by packages
A unit installed by a package that is meant to be run by a systemd user instance should install the unit to
/usr/lib/systemd/user/. The system adminstration can then modify the unit by copying it to
/etc/systemd/user/. A user can then modify the unit by copying it to
The following is an example of a user version of the mpd service.
[Unit] Description=Music Player Daemon [Service] ExecStart=/usr/bin/mpd --no-daemon [Install] WantedBy=default.target
Example with variables
The following is an example of a user version of
sickbeard.service, which takes into account variable home directories where SickBeard can find certain files:
[Unit] Description=SickBeard Daemon [Service] ExecStart=/usr/bin/env python2 /opt/sickbeard/SickBeard.py --config %h/.sickbeard/config.ini --datadir %h/.sickbeard [Install] WantedBy=default.target
As detailed in
man systemd.unit, the
%h variable is replaced by the home directory of the user running the service. There are other variables that can be taken into account in the systemd manpages.