Difference between revisions of "TFTP"

From ArchWiki
Jump to: navigation, search
(tftpd setup)
(No difference)

Revision as of 17:00, 6 March 2007

Okay i want to describe here how to set up a tftpd server under archlinux.

At first thing is to install all neccesary stuff:

pacman -S mkpxelinux tftpd-hpa dhcpd

Now we need to do some configure stuff at first we will create our dhcpd.conf file.

The config is located in /etc/

and have to look like this (basic dhcpd config)

ddns-update-style interim;

subnet *your subnet here* netmask *here your netmask* {
        option routers                  *here ip of your router*;
        option subnet-mask              *your subnet here again ;)*;

        option domain-name              "here you can put your domain name if you dont have one take example.com";

        option time-offset              -18000;     # Eastern Standard Time
        next-server *here ip of your maschine where dhcpd is running*;
        filename "pxelinux.0";

        allow booting;
        allow bootp;

        range *here the range of ip adresses your dhcpd is allow to take example:;

remove the ** form the config ;).

after this you have to run

mkpxeboot -a

this will create all images and stuff to boot. Now we replace the kernel and the initrd.img with the newes from the install iso.

wget ftp://ftp.archlinux.org/other/0.8/i686/ftp-0.8-beta2-20070222-i686.iso

when download is finished we nearly finished.

mount -o loop /where/the/iso/is/located /path/to/mount/
cp /path/to/mount/isolinux/initd.img /var/tftpboot/
cp /path/to/mount/isolinux/vmlinuz /var/tftpboot/

now last config and then we can fireup all the stuff

nano/vi/joe... /etc/hosts.allow

and add this line:
tftpd: ALL
in.tftpd: ALL

now do

/etc/rc.d/tftpd start
and in a terminal

Now you can start the pc you want to install.

Good Luck espo