From ArchWiki
Jump to navigation Jump to search

X11 forwarding

regarding X11 forwarding: i don't think it is necessary to enable X11Forwarding on the client on a global base: "Enable the ForwardX11 option in ssh_config on the client."

simply specifing -X option to ssh works for me. [The preceding unsigned comment was added 2010-01-11T15:41:54 by Uwinkelvos (Talk | contribs).]

Upon another look at the SSH Forwarding section, as per the comment in the Stack Exchange link provided [1] the xorg-xhost package is not needed on either the remote side or client side. However the xorg-xauth package is needed on the side client for the ForwardX11Trusted or -X options to work. Jamesp9 (talk) 10:56, 2 September 2017 (UTC)

I have to use export DISPLAY=:10.0 on the server after logging in before I can actually run any programme requiring X. --cfr (talk) 22:25, 26 September 2017 (UTC)


I think we should add something about accent/UTF-8/encoding. Setting SendEnv LANG LC_* in /etc/ssh/ssh_config (client side) would be very useful. —This unsigned comment is by LeCrayonVert (talk) 22 August 2010. Please sign your posts with ~~~~!

Automatically logout all SSH users when the sshd daemon is shutdown.

edit /lib/systemd/system/systemd-user-sessions.service and append to the after line.

[Unit] Description = Permit User Sessions

Documentation = man:systemd-user-sessions.service(8)

After =

then symlink /lib/systemd/system/systemd-user-sessions.service to /etc/systemd/system/

artomason (talk) 20:32, 7 February 2013 (UTC)

systemd failed to start sshd

It might be good to add, if systemctl status sshd shows that sshd failed, try and run /usr/sbin/sshd. This way if there is a bad configuration option (ie typo in /etc/ssh/sshd_conf), it is listed with line number.

Matyilona200 (talk) 13:45, 16 May 2013 (UTC)


The option 'transform_symlinks' does not work anymore, 'follow_symlinks' is the new one.

1. Should we correct that at the autossh section?

2. Should we write that somewhere?

--Greenway (talk) 17:14, 26 April 2014 (UTC)

Are you sure? I've just installed sshfs and the man page still mentions both options as separate functions. If transform_symlinks is really not working anymore, that's more likely a bug that must be reported upstream.
Anyway I'm just mentioning that also the sshfs article would be affected.
-- Kynikos (talk) 03:12, 28 April 2014 (UTC)

Sorry for this discussion and thank you for correcting me. I referred to this question: Anyway I tested both parameters:

1) sshfs bar: foo

-a --> /etc     l
-b --> c/c1     l
-c              d 
--c1            f

2) sshfs -o follow_symlinks bar: foo

-a              d
-b              d
-c              d
--c1            f

(works as expected)

3) sshfs -o transform_symlinks bar: foo

(same as without the option.)

Here' s the wiki explanation

Following symlinks on the server side

The -o follow_symlinks option will enable this.

Making absolute symlinks work

Use the -o transform_symlinks option, which will transform absolute symlinks (ones which point somewhere inside the mount) into relative ones.

--Greenway (talk) 20:38, 28 April 2014 (UTC)

Regenerate host keys

I am using pre-load arch linux image on Raspberry Pi, which had openssh configured, so I want to regenerate new host keys, which could be archived on Debian with

rm /etc/ssh/ssh_host_* && dpkg-reconfigure openssh-server

Do we have equivalent command on Arch? I can't find them on the wiki

 ssh-keygen -t dsa -f /etc/ssh/ssh_host_dsa_key
 ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key
 ssh-keygen -t ecdsa -f /etc/ssh/ssh_host_ecdsa_key

should be enough? Or more setting is required?


--Lefthaha (talk) 24 May 2014

AutoSSH as a Service

AutoSSH doesn't like to run as a service without specifying a port. Using -M 0 and -f parameters in combination will result in the service not starting. Also, when starting as a service (-f option) SSH will not look in ~/.ssh for public keys. If you're using key authentication, the public key will need to be specified with the -i parameter. I assume this limitation would also apply when running as a systemd service.

Running AutoSSH this way worked for me for a Socks 5 proxy:

autossh -f -M 1111 -N -i /home/username/.ssh/id_rsa username@server -D 8080

--Twofive0 (talk) 18:24, 12 August 2014 (UTC)

Autossh as a service seems to be a little redundant, since autossh itself is basically just a service to restart ssh when it exits. I was about write a .service file for autossh when I realized I could cut out the middleman entirely:
Description=SSH tunnel

ExecStart=/usr/bin/ssh -F %h/.ssh/config -N foo@bar

This seems a little nicer to me, but I'm not sure how I would edit the article to include it.
Silverhammermba (talk) 00:32, 12 February 2015 (UTC)

Additional steps to setup Dropbear

Noticed that you need to create some keys before Dropbear will run:

dropbearkey -t dss -f /etc/dropbear/dropbear.dss
dropbearkey -t rsa -s 4096 -f /etc/dropbear/dropbear.rsa

Maybe it's a good idea to chmod this to 600 or something? —This unsigned comment is by MindTooth (talk) 5 December 2014. Please sign your posts with ~~~~!

To note: Not relating to dropbear, but generally #Regenerate_host_keys above suggests the addition of a setup step for that as well. --Indigo (talk) 14:19, 5 December 2014 (UTC)

Allowing SSH Users to Shutdown, Mount, etc. Without Root authentication

Merged from Allow users to shutdown. -- Alad (talk) 20:48, 23 May 2015 (UTC)

The following describes what I did to allow power [EDIT: and mounting] operations on my machine from a SSH login. I'd be very grateful if anyone could tell me if this was correct and if so, I'll add this section to the page and add a link on the polkit examples.

I have a miniature server machine I use at home for automatic backups, and I used WOL to startup without user intervention, however I found out that issuing

systemctl poweroff

and friends works from a tty but from a remote login I get a message starting:

==== AUTHENTICATING FOR org.freedesktop.login1.power-off ====

and asking for a root password. After searching online it seemed that the right thing to do (but I'm not sure) was to write a polkit rule overriding the and place this before the defaults in /etc/polkit-1/rules.d/. Below is my rule:

polkit.addRule(function(action, subject) {
	if ( == "org.freedesktop.login1.power-off" || == "org.freedesktop.login1.power-off-multiple-sessions" || == "org.freedesktop.login1.reboot" || == "org.freedesktop.login1.reboot-multiple-sessions" || == "org.freedesktop.login1.suspend" || == "org.freedesktop.login1.suspend-multiple-sessions" ||
  == "org.freedesktop.login1.hibernate" || == "org.freedesktop.login1.hibernate-multiple-sessions"	) {

		if ( subject.isInGroup("mypowergroup") ){
			return polkit.Result.YES;

There might be a neater way to do this rather than enumerating all the actions but I don't speak JavaScript. EDIT: See below:

Someone somewhere seemed to mention that polkit rules weren't the right way to go and there was something wrong with integration with logind/systemd but I didn't understand what he really meant and it was in a different context.

Thanks in advance for any advice --Stellarpower (talk) 12:24, 4 May 2015 (UTC)

Pseudo-terminal will not be allocated because stdin is not a terminal

When you connect to a ssh server via a ssh relay using command like:

ssh user2@relay ssh user3@localhost -p 2222

without -t, you will get errors like this:

Pseudo-terminal will not be allocated because stdin is not a terminal.
Host key verification failed.

Because, without -t, ssh is not going to allocate a tty for command ssh user3@localhost -p 2222. ssh(1)

Basically, if you want to execute a command which needs interactions, you need add -t.

For eamlple:

ssh -t user@server "tmux"

If you just execute a command which just outputs and doesn't need interactions, you could just omit the -t.

For example:

ssh user@server "echo test"

—This unsigned comment is by Edward-p (talk) 12:59, 13 July 2019‎. Please sign your posts with ~~~~!

Thanks, but the flag is about a different command. -- Lahwaacz (talk) 13:21, 13 July 2019 (UTC)

Daemon management

Mac does it, therefore we should too? What? The links arguing that loading ssh on demand is the best idea ever since sliced bread don't provide any security attestation or context but only convenience. Having systemd listening to anything exposes systemd to attacks and systemd is the last think I want to expose in a system. For instance, one argument is that we cannot restart ssh remotely without being disconnected. 1) How common is that 2) Sounds like a good practice because, what holds that session and how that hold can be exploited is not even considered.

—This unsigned comment is by 2019‎ (talk) 18:51, 7 September. Please sign your posts with ~~~~!

OpenSSH#Daemon_management has significantly changed since September, closing. -- Lahwaacz (talk) 10:59, 4 October 2019 (UTC)

sshd.socket warnings

The warning list at OpenSSH#Daemon_management reads like FUD to me. The warnings are not constructive, they look like they are designed to scare people away.


  1. Warning: If you continue using sshd.socket, be aware of its issues:
    • This doesn't read well to a new person. They are not "continuing" to use anything. It's basically aimed at existing users.
    • Labels socket activation as "having issues".
  2. Warning: Using sshd.socket negates the ListenAddress setting, so it will allow connections over any address. To achieve the effect of setting ListenAddress, you must specify the port and IP for ListenStream (e.g. ListenStream= by editing sshd.socket. You must also add FreeBind=true under [Socket] or else setting the IP address will have the same drawback as setting ListenAddress: the socket will fail to start if the network is not up in time.
    • Not constructive.
    • sshd.service also listens on and [::] by default, there is no difference. It sounds like this behavior is an "issue" with sshd.socket.
    • This criticism could rather have been pointed out as a paragraph or a tip:
      Tip: To let sshd.socket listen on a specific address, edit sshd.socket. Set ListenStream=...
  3. Warning: When using socket activation a transient instance of sshd@.service will be started for each connection (with different instance names). Therefore, neither sshd.socket nor the daemon's regular sshd.service allow to monitor connection attempts in the log. The logs of socket-activated instances of SSH can be seen with journalctl -u "sshd@*" or with journalctl /usr/bin/sshd.
    • This is a quite negative perspective.
    • It's not true: sshd.socket or sshd.service don't disallow monitoring connection attempts in the log. I'm not quite sure what that statement even means. Everything is certainly logged, regardless of whether sshd.service or sshd.socket is used.
    • This could suffice:
      Tip: To views logs of sshd.socket activated instances, run for example journalctl /usr/bin/sshd

It comes off as an attack on socket activation IMO, and while socket activation might not be wanted by everyone, it's certainly a valid thing to use:

Does anybody else agree on it being overly negative? Should we change it to make it constructive?

Aude (talk) 11:43, 3 October 2019 (UTC)

As you correctly guessed the warning is aimed at existing not new users. New users would not have sshd.socket and sshd@.service since they were removed from the openssh package.
The criticism of placing it all in a Template:Warning is warranted, as previously it was split between a warning, note and tip. I rationalized it with the thought that after a while that whole warning could just be removed. I have now split them again, though differently than before.
There should be no issue if you want to make the section less scary, but keep in mind that it must be made clear that sshd.socket is not supported by Arch and users are on their own if they use it.
-- nl6720 (talk) 12:06, 3 October 2019 (UTC)
That makes sense, I understand the rationale: sshd.socket is deprecated.
The split you did now reads much better IMO.
What do you think about moving the sshd.socket related stuff down to OpenSSH#Tips_and_tricks? I'm thinking it could make sense to move information about a deprecated feature out of the main information, to reduce noise.
Aude (talk) 08:53, 4 October 2019 (UTC)
You may move it to OpenSSH#Tips and tricks, but then you should add example units or link to sshd.socket & sshd@.service. Also the first note must stay in OpenSSH#Daemon management. -- nl6720 (talk) 09:52, 4 October 2019 (UTC)
Okay, sounds good. I might do it. Aude (talk) 15:31, 5 October 2019 (UTC)
Pointing out certain issues is not an attack on anything. I also don't think that the current wording is overly negative - certainly not more negative than the existence of the issues. -- Lahwaacz (talk) 18:56, 3 October 2019 (UTC)