Difference between revisions of "Talk:Solid State Drive"
(→fstab: none vs. tmpfs)
(→Using GPT - Modern Method: new section)
|Line 65:||Line 65:|
--[[User:Lucat|Lucat]] 14:38, 20 February 2012 (EST)
--[[User:Lucat|Lucat]] 14:38, 20 February 2012 (EST)
Revision as of 04:35, 26 July 2012
Get head and cylinder number
@Aedit - thank you very much for the contribution to this article. Can you explain how you arrived at the numbers that relate to the head and cylinder choices? 2^8 times 49 and how does that translate into 2^8 times 512 = 128 KiB alignment?
- Ted Tso recommends using a setting of 224*56 (=2^8*49) which results in (2^8*512=) 128 KiB alignment
- While others advocate a setting of 32*32 (=2^10) which results in (2^10*512=) 512 KiB alignment
@Graysky - you're welcome. The alignment number is the largest power-of-two divisor of the cylinder boundary positions on the disk. The size in bytes of the cylinders is H*S*512 = (tracks per cylinder) * (sectors per track) * (sector size). So factorize H, S and sector size (512=2^9) into prime factors, and take all the 2s. In the first case above we have to ignore the non-power-of-two factor of 7^2=49.
@Aedit - interesting. I have an Intel X25-M G2 and I used the -H 32 -S 32 to give a 512 KiB alignment which should be fine, yet Ted suggests using the values that give a 128 KiB alignment (although 128 is a factor of 512). Is there any advantage to using the smaller number, or to put it another way, is there a disadvantage to using the larger number?
@Graysky: As you say, a disk aligned to 512k is also aligned to 256k,128k... etc. The only disadvantage of larger alignment I know is that a little space is wasted by putting partition boundaries on the larger alignment. I suspect Ted thought the X25-M has a 128k erase block but I also have seen reports of 512k. Is there a definitive reference? Very nice wiki page btw - thanks.
Did you ever think about directing the user to a painless partitionning scheme like GPT? You can just use gdisk /dev/sda and create as many partitions you want and it will be created at sector 2048 by default! Else you can also suggest using fdisk -cu /dev/sda (with a recent version of fdisk) which will do about the same except with logical partitions. Anyway, no one uses DOS anymore, just think about it twice, the famous extended partition was really a big big hack which should be forgotten. Booting XP with a partition starting at sector 2048 made with fdisk just works anyway. TiCPU 02:12, 9 July 2010 (EDT)
@TiCPU: I just buy another SSD (the current one will go into the laptop) and I consider using GPT, since I won't install XP nor Seven on it and since after this article GPT allow the use of GPT and Gparted that do auto-alignement. So if either you could write something, or when I'll try to partion my drive I'll write what I do. Tcourbon 09:56, 30 September 2010 (EDT)
I write something based on my notes taken during my arch install using GPT and experimentation with gdisk and a raw disk image. Can someone review it ? Tcourbon 16:31, 11 November 2010 (EST)
While I think GPT is a good idea, it requires another bootloader than Grub. Since Grub2 is an unholy mess, and the other alternatives are far from common, I think it is a little harsh to call the fdisk/MBR approach "DEPRECATED". Especially since the latest fdisk has sane defaults for SSDs (with respect to alignment). I'm probably going to rewrite the fdisk/MBR section, to reflect changes in the latest version of fdisk, and change the wording to be less dramatic than "PREFERRED/DEPRECATED". Any objections? --AsmundEr 11:40, 29 January 2012 (EST)
I don't think grub2 is an unholy mess at all. Very usable and reliable. I dunno about the latest fdisk, but I agree with you about using less harse language giving users the two options. Graysky 12:06, 29 January 2012 (EST)
I guess we agree to disagree on grub2. Personally, I don't like it. But I've rewritten the GPT and the MBR sections, in what I hope is a fairly balanced way. In particular, I added a subsection at the start of the GPT section, which guides the user in choosing between GPT and MBR. Does this look OK to you? AsmundEr 10:39, 31 January 2012 (EST)
Dispite common practice and believes OCZ discourages the use of AHCI on (their) SSD drives  Both AHCI and IDE mode support the TRIM command, so it is recommended to use IDE SSD drives. --User:theking2 15:25, April 20, 2011
This guide is 3 years old - I don't know if there is an actual one, but this guide was only for the OCZ Core Series back in 2008.
--Evilandi666 20:46, 14 June 2011 (EDT)
Still there is no need for AHCI in order to enable TRIM. The two having nothing to do with each other. AHCI would enable NCQ, which is useless if not harmful on a SSD. forum msi
I recommend to remove the misleading remark on AHCI in this wiki. --Theking2 06:25, 4 March 2012 (EST)
DONT USE NOOP
The noop scheduler will perform slow but as a result it will greatly frees up CPU cycles. This in the real world will not increase the speed of your read/writes compared to CFS but instead consume less CPU resources. You can benchmark the deadline scheduler which MAY increase performance in some circumstances. By real world benchmarks, I mean anything but hdparm.
- Interesting assertion... do you have any data or a source to back it up?
- Graysky 17:20, 21 December 2011 (EST)
- It seems that the cfq scheduler already knows what to do when SSD is detected, so there is no use to change it.
- raymondcal 2012, may 29
fstab: none vs. tmpfs
Is there any significance in the fact that the following two examples of fstab entries start differently?
none /tmp tmpfs nodev,nosuid,noatime,size=1000M,mode=1777 0 0 tmpfs /tmp tmpfs nodev,nosuid,size=7G 0 0
I have a feeling I just needlessly switched an SSD system from the latter to the former... Not that it matters if they are equivalent but I'm just not clear from either this or the linked documentation on tmpfs if this is correct or not. --Margali 22:41, 3 January 2012 (EST)
The Note might be wrong. In particular: "Note: If one do not know the EBS of one's SSD, use a size of 512 KiB. Those numbers are greater or equal than all the current EBS."
I have contacted Kingston about my 64GB V200 SSD, this is their answer about the erase block size and page size (and some other questions): 1) Disk Alignment is only necessary if you are cloning an hard drive with Windows XP installed - if you are doing a fresh installation or cloning / installing Vista or 7, you do not need to align. 2.1+2.2) Erase Block size / Page size data is on TS Intranet, E.B. is 2MB, P.S. is 8KByte/Page 2.3) All current SSDs support the TRIM feature in Windows 7 and 2008. The TRIM version in Apple OS supports only Apple certified SSDs.
--Lucat 14:38, 20 February 2012 (EST)