Talk:Solid State Drive
@Aedit - thank you very much for the contribution to this article. Can you explain how you arrived at the numbers that relate to the head and cylinder choices? 2^8 times 49 and how does that translate into 2^8 times 512 = 128 KiB alignment?
- Ted Tso recommends using a setting of 224*56 (=2^8*49) which results in (2^8*512=) 128 KiB alignment
- While others advocate a setting of 32*32 (=2^10) which results in (2^10*512=) 512 KiB alignment
@Graysky - you're welcome. The alignment number is the largest power-of-two divisor of the cylinder boundary positions on the disk. The size in bytes of the cylinders is H*S*512 = (tracks per cylinder) * (sectors per track) * (sector size). So factorize H, S and sector size (512=2^9) into prime factors, and take all the 2s. In the first case above we have to ignore the non-power-of-two factor of 7^2=49.
@Aedit - interesting. I have an Intel X25-M G2 and I used the -H 32 -S 32 to give a 512 KiB alignment which should be fine, yet Ted suggests using the values that give a 128 KiB alignment (although 128 is a factor of 512). Is there any advantage to using the smaller number, or to put it another way, is there a disadvantage to using the larger number?
@Graysky: As you say, a disk aligned to 512k is also aligned to 256k,128k... etc. The only disadvantage of larger alignment I know is that a little space is wasted by putting partition boundaries on the larger alignment. I suspect Ted thought the X25-M has a 128k erase block but I also have seen reports of 512k. Is there a definitive reference? Very nice wiki page btw - thanks.