From ArchWiki
Revision as of 11:20, 7 March 2018 by Taifleh (talk | contribs) (boot into windows once?: give an answer)
Jump to navigation Jump to search

About reboot into firmware configuration interface

If I remember correctly, isn't that one of the entries that are auto-generated by gummiboot, along with windows entries? Moviuro (talk) 12:41, 15 March 2015 (UTC)

AFAIK, there aren't any autogenerated default options in the Gummiboot boot manager to reboot into the firmware. I only have the autodetected efiboomgr entry which appears when Windows is installed and the entries I defined manually. -- wget (talk) 13:08, 15 March 2015 (UTC)
I spent some time googleing about this issue. Without success. So it would save time and pain to add some working example. It's a useful feature. --Cschlote (talk) 00:26, 16 March 2015 (UTC) And I don't have a Reboot into device firmware entry, nor the EFI default loader Moviuro (talk) 22:35, 21 March 2015 (UTC)
I already found several real machines, which will either show none of these entries, or just one of them. Only a VM shows all entries. --Cschlote (talk) 12:32, 23 March 2015 (UTC)
Well, this picture was taken on my Dell Latitude (E6430). Moviuro (talk) 15:28, 23 March 2015 (UTC)

$esp pseudo-var

I'd suggest replacing $esp that's prominent in the article with the standard /boot, i.e. replace

$esp is used to denote the mountpoint in this article.


In this article, /boot is used as the mountpoint.

And replace $esp instances accordingly. Changing the mountpoint is immediate to anyone who wants to do so, so another pseudo-var isn't required.

In addition, it's confusing to those who wish to go with the recommended /boot mountpoint. -- Alad (talk) 10:33, 5 January 2016 (UTC)

While that could make sense, we'd create an inconsistency with all the other boot loader articles, which do use $esp as well: GRUB, Syslinux, EFISTUB and rEFInd. Personally, I don't think that using a variable like that is creating confusion, especially after [1]. — Kynikos (talk) 07:12, 9 January 2016 (UTC)

Keys inside the boot menu, clarification

once you use keys to change timeout (-,T,+,t), this setting is saved in a non-volatile EFI variable; in this way `loader.conf` setting is overridden; a) how to clear the non-volatile EFI variable? b) how to show values of non-volatile EFI variables? --nTia89 (talk) 14:22, 27 May 2016 (UTC)
a) maybe reflashing the bios ^^ or efivar -w (be carefully you can brick your motherboard) b) also with efivar --name var -p
—This unsigned comment is by Fallback (talk) 21:13, 31 August 2017‎. Please sign your posts with ~~~~!

The section about Windows 8+ overriding boot settings is incorrect

I have a dual boot with Windows 10 and it does not override your boot settings or make Windows the default at each boot as explained in the wiki (it might during a major upgrade that work more or less as a new install, like Windows 8 -> Windows 10).

The fact is that, Windows normally manage the default boot efi file $esp\boot\efi\bootx64.efi and keep it identical to $esp/EFI/Microsoft/Boot/bootmgfw.efi . This file is often updated (I don't know if it is at every boot, but very often). The default installation of systemd-boot put also a copy of itself at the default $esp\boot\efi\bootx64.efi and this can gives a conflict because it will be overwritten by Windows. If we manage to correctly put a default boot entry in the firmware that is not $esp\boot\efi\bootx64.efi, there will be no problems. If we have a motherboard that can only boot $esp\boot\efi\bootx64.efi then and only then we are in trouble and the work around described in the wiki can make sense. It would be safer not touching $esp\boot\efi\bootx64.efi, I think Windows expect we do not touch this file.


add a section which talks about splash feature. --nTia89 (talk) 09:40, 9 July 2016 (UTC)

loader.conf: timeout 0?

Missing (for me) is what happens when "timeout 0" is set in loader.conf

—This unsigned comment is by Probackup-nl (talk) 11:09, 22 November 2017‎. Please sign your posts with ~~~~!

boot into windows once?

Does anyone know whether there is a way to reboot into windows once from linux using a command line. I.e. instead of "reboot", but "reboot-windows", which will boot into windows without me choosing anything at the boot menu. And on next reboot reboot into linux as the default sets?

—This unsigned comment is by Minxu (talk) 21:06, 28 January 2018‎. Please sign your posts with ~~~~!

run efibootmgr, note the number of the entry you want to boot next, run efibootmgr -n $number, that sets the boot entry as BootNext.Taifleh (talk) 11:20, 7 March 2018 (UTC)

objcopy use with intel-ucode.img (closed)

as it is nowhere to be found, i am clueless. how do i integrate the intel-ucode-img within an efi file in that manner? Taifleh (talk) 01:35, 7 March 2018 (UTC)

See Microcode#EFI_boot_stub_.2F_EFI_handover. -- Lahwaacz (talk) 07:18, 7 March 2018 (UTC)
Well, this was a kind of obvious solution. Thank you for sharing! Taifleh (talk) 09:58, 7 March 2018 (UTC)