Difference between revisions of "TerraTec Cinergy T RC MKII USB Stick"

From ArchWiki
Jump to: navigation, search
(Created page with "Category:Audio/Video (English) {{i18n|TerraTec_Cinergy_T_RC_MKII_USB_Stick}} '''TerraTec Cinergy T RC MKII''' is a USB DVB-T receiver manufactured by TerraTec Electronic ...")
 
m (Installation: updated installation directory)
(4 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[Category:Audio/Video (English)]]
+
[[Category:Audio/Video]]
{{i18n|TerraTec_Cinergy_T_RC_MKII_USB_Stick}}
+
'''TerraTec Cinergy T RC MKII''' is a USB DVB-T receiver manufactured by TerraTec Electronic GmbH. This page describes the installation of the TerraTec Cinergy T RC MKII USB Stick (USB ID 0ccd:0097). It is supported since kernel version 2.6.37.
 
+
'''TerraTec Cinergy T RC MKII''' is a USB DVB-T receiver manufactured by TerraTec Electronic GmbH. This page describes the installation of the TerraTec Cinergy T RC MKII USB Stick (USB ID 0ccd:0097). It is supported since Kernel 2.6.37.
+
  
 
== Verify Device ID ==
 
== Verify Device ID ==
Make sure you have the 'correct' device. It should have the ID '0ccd:0097':
+
Make sure you have the 'correct' device. The USB ID is '0ccd:0097':
 
  $ lsusb
 
  $ lsusb
 
  Bus 001 Device 004: ID 0ccd:0097 TerraTec Electronic GmbH Cinergy T RC MKII
 
  Bus 001 Device 004: ID 0ccd:0097 TerraTec Electronic GmbH Cinergy T RC MKII
Line 19: Line 17:
 
You need to install the firmware file:
 
You need to install the firmware file:
 
  $ wget http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/dvb-usb-af9015.fw
 
  $ wget http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/dvb-usb-af9015.fw
  $ sudo cp dvb-usb-af9015.fw /lib/firmware/
+
  $ sudo cp dvb-usb-af9015.fw /usr/lib/firmware/
  
 
Reconnect the device and you should see the following output. The device is now ready to use :)
 
Reconnect the device and you should see the following output. The device is now ready to use :)

Revision as of 15:48, 20 October 2012

TerraTec Cinergy T RC MKII is a USB DVB-T receiver manufactured by TerraTec Electronic GmbH. This page describes the installation of the TerraTec Cinergy T RC MKII USB Stick (USB ID 0ccd:0097). It is supported since kernel version 2.6.37.

Verify Device ID

Make sure you have the 'correct' device. The USB ID is '0ccd:0097':

$ lsusb
Bus 001 Device 004: ID 0ccd:0097 TerraTec Electronic GmbH Cinergy T RC MKII

Installation

If you plug-in the device you will see the following kernel message:

$dmesg
[ 4403.369654] usb 1-1: new high-speed USB device number 5 using ehci_hcd
[ 4403.862797] dvb-usb: found a 'TerraTec Cinergy T Stick RC' in cold state, will try to load a firmware
[ 4403.864076] dvb-usb: did not find the firmware file. (dvb-usb-af9015.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)
[ 4403.864103] dvb_usb_af9015: probe of 1-1:1.0 failed with error -2

You need to install the firmware file:

$ wget http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/dvb-usb-af9015.fw
$ sudo cp dvb-usb-af9015.fw /usr/lib/firmware/

Reconnect the device and you should see the following output. The device is now ready to use :)

$dmesg
[ 4867.138959] dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
[ 4870.056313] usb 1-1: new high-speed USB device number 6 using ehci_hcd
[ 4870.549447] dvb-usb: found a 'TerraTec Cinergy T Stick RC' in cold state, will try to load a firmware
[ 4870.551676] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
[ 4870.618834] dvb-usb: found a 'TerraTec Cinergy T Stick RC' in warm state.
[ 4870.618971] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 4870.619381] DVB: registering new adapter (TerraTec Cinergy T Stick RC)
[ 4870.622186] af9013: firmware version:4.95.0.0
[ 4870.627936] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
[ 4870.630198] tda18218: NXP TDA18218HN successfully identified.
[ 4870.631940] Registered IR keymap rc-terratec-slim-2
[ 4870.632197] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/rc/rc2/input11
[ 4870.632437] rc2: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/rc/rc2
[ 4870.632446] dvb-usb: schedule remote query interval to 500 msecs.
[ 4870.632454] dvb-usb: TerraTec Cinergy T Stick RC successfully initialized and connected.

External links