TerraTec T6 DVB-T (Afatech AF9035)
The TerraTec T6 is a dual DVB-T USB-device. The device is supported by the kernel, but requires additional proprietary firmware to be loaded to function.
This tutorial was tested for a Terratec T6 with the Afatech AF9035 chipset. There is a package in the AUR, but it does not work at this time.
Filter dmesg to find out the exact chipset with the following command:
$ dmesg | grep dvb usb 3-1: dvb_usb_af9035: prechip_version_00 chip_version_03 chip_type_3802 usb 3-1: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802 usb 3-1: dvb_usb_v2: found a 'Afatech AF9035 reference design' in cold state}}
The cold state indicates it is not active, due to the missing firmware file.
The firmware file in this case was made available at: 
Download the file of your choice and navigate to the download-folder.
Without a PKGBUILD the file cannot be installed (and tracked) with pacman. However, for a firmware the main step of an installation is to move the file into the
If you move the file manually and re-plug the device, dmesg should show the firmware loaded and the device is now in warm state:
$ dmesg |grep -e dvb -e af9033 usb 3-1: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802 usb 3-1: dvb_usb_v2: found a 'Afatech AF9035 reference design' in cold state usb 3-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw' usb 3-1: dvb_usb_af9035: firmware version=18.104.22.168 usb 3-1: dvb_usb_v2: found a 'Afatech AF9035 reference design' in warm state usb 3-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer DVB: registering new adapter (Afatech AF9035 reference design) calling af9033_driver_init+0x0/0x1000 [af9033] @ 5364 initcall af9033_driver_init+0x0/0x1000 [af9033] returned 0 after 47 usecs af9033 7-0038: firmware version: LINK 22.214.171.124 - OFDM 126.96.36.199 af9033 7-0038: Afatech AF9033 successfully attached usb 3-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...