From ArchWiki
Revision as of 04:24, 24 November 2012 by Fengchao (Talk | contribs) (Run: Add systemd start command.)

Jump to: navigation, search

The Trivial File Transfer Protocol (TFTP) provides a minimalistic means for transferring files. It is generally used as a part of PXE booting or for updating configuration and firmware on devices which have limited memory such as routers and printers.

This article describes how to set up a tftpd server under Arch Linux using the tftp-hpa package.


Install the package tftp-hpa which can be found in the official repositories.


The configuration for tftpd is in /etc/conf.d/tftpd

The default configuration is:

# Parameters to be passed to TFTPD
TFTPD_ARGS="-l -s /srv/tftp/"

The directory /srv/tftp is created automatically when tftp-hpa is installed.

For a complete list of parameters:

$ man in.tftpd



To start the daemon at boot, run:

# systemctl enable tftpd.socket

To start the daemon manually:

# systemctl start tftpd.socket


To start the daemon at boot, add tftpd to the DAEMONS array in /etc/rc.conf.

To start the daemon manually:

# /etc/rc.d/tftpd start

To start the daemon without a configuration file:

# /usr/sbin/in.tftpd -l -s path/to/folder/to/export


tftpd startup fails if ipv6 is disabled

If tftpd startup fails without leaving error messages, it might be because ipv6 is disabled and you are not explicitly telling tftpd not to use ipv6. You can make tftpd start by enabling ipv6 or by telling tftpd to only use ipv4, adding the '-4' switch to /etc/conf.d/tftpd

TFTPD_ARGS="-l -4 -s /srv/tftp/"