ThinkPad: Mute button
Mute button does not work properly on most ThinkPads and IdeaPads with a newer kernel. Two different scenarios occur:
- The Button does not react at all: no led flash (some ThinkPads have an LED, indicating the Mute-State) and no effect on Speakers Volume. It only mutes, if you first press the mute button and afterwards the Vol-Down-Key.
External Audio still on
- Pressing the button causes the speakers to mute (LED also works), but external audio is still on.
Older IBM ThinkPads
- First try this: "http://www.thinkwiki.org/wiki/Mute_button"
- Edit your /etc/modprobe.d/modprobe.conf and add the following line:
options thinkpad_acpi enabled=0 # enables Mute-Button on ThinkPads with IdeaPad-Firmware
- reboot, and go on:
External Audio still on:
- Install AUR and create an file "/root/.tpbrc": AUR from the
- Now create the file "/root/tp-key-handler":
#!/bin/bash echo $1 $2 if [ $1 = mute ]; then if [ $2 = on ]; then mset="off"; else mset="on"; fi sudo -u USERNAME amixer sset Master $mset; # I had to sudo to me, because I use PulseAudio fi
- you'll have too add execute-rights to /root/tp-key-handler:
chmod +x /root/tp-key-handler
- Since tpb needs root-privileges as well as X, you may start it by adding "sudo tpb" in the .xinitrc and editing your sudo-Settings (use visudo) or addin "gksudo tpb" in any X-Startscript (the last will ask for an password on startup).
That's it - if you have a better Idea, please do not hesitate to edit this page!
External Audio still on (and you use XFCE):
Go to Applications->Settings->Keyboard->Application Shortcuts tab. Hit Add and for the command, use 'amixer sset Master toggle'. For the key, hit the mute button. Protip, to make sure the led state is correct, start with the led in the opposite state of your mutedness so that when you map the button, it starts out in the correct state. Alternatively, you could just reboot and make sure the led is off before you get into your XFCE session.