From ArchWiki
Revision as of 21:51, 13 June 2018 by Kewl (talk | contribs) (Using tigervnc's x0vncserver: do not abuse warnings)
Jump to navigation Jump to search

TigerVNC is an implementation of the VNC protocol. This article focuses on the server functionality.


Install the tigervnc package.

Two VNC servers are available with TigerVNC:

  1. Xvnc is the default and recommended server for TigerVNC. It is both a VNC server and an X server with a virtual framebuffer. This means it is similar to the standard X server but has a virtual screen rather than a physical one. The virtual server runs in parallel with the physical X server should one be running. See Xvnc(1) for the manual. vncserver is a wrapper script which eases the starting of Xvnc, see vncserver(1).
  2. x0vncserver provides direct control of the local X session(s) which are running on the physical monitor. It continuously polls the X display which is a simple but inefficient implementation. See x0vncserver(1) for the manual.

Running vncserver for virtual (headless) sessions

Create environment, config, and password files

The first time vncserver is run, it creates its initial environment, config, and user password file. These will be stored in ~/.vnc which will be created if not present.

$ vncserver
You will require a password to access your desktops.


New 'mars:1 (facade)' desktop is mars:1

Creating default startup script /home/facade/.vnc/xstartup
Starting applications specified in /home/facade/.vnc/xstartup
Log file is /home/facade/.vnc/mars:1.log

Note the :1 trailing the hostname. This indicates the TCP port number on which the virtual vncserver is running. In this case, :1 is actually TCP port 5901 (5900+1). Running vncserver a second time will create a second instance running on the next highest, free port, i.e 5902 (5900+2) which shall end in :2 as above.

Note: Linux systems can have as many VNC servers as memory allows, all of which will be running in parallel to each other.

To shutdown the just created VNC server, use the -kill switch:

$ vncserver -kill :1

Edit the environment file

The ~/.vnc/xstartup script is sourced by vncserver for creating the virtual X session and it must be adapted to one's needs. It functions like an .xinitrc file. Users are expected to start a Desktop environment, see: General recommendations#Desktop environments.

For example, starting XFCE:

exec startxfce4

Make sure ~/.vnc/xstartup has a execute permission:

chmod u+x ~/.vnc/xstartup

Edit the optional config file

TigerVNC supports parsing vncserver options in ~/.vnc/config rather than through the command line. The format is one option per line. An example is provided:


Starting and stopping vncserver via systemd

Systemd can manage the vncserver via a service in one of two modes using either a user or system service. Both are presented below.

User mode

Note: In order to keep the vncserver alive when the user logs out (physically or via ssh), one must enable the linger option for loginctl like this: # loginctl enable-linger username Failure to do so will result in the vncserver getting killed when the user logs off the machine.

Start and enable the service vncserver@:1.service in Systemd/User mode, i.e. with the --user parameter.

System mode

Warning: Do not run this service if your local area network is untrusted.

Create /etc/systemd/system/vncserver@:1.service, where :1 is the $DISPLAY environment variable.

Modify the service by defining the user (User=) to run the server, and the desired Vncserver options (usr/bin/vncserver %i -arg1 -arg2 -argn).

Description=Remote desktop service (VNC)
After=syslog.target network.target

ExecStartPre=/bin/sh -c '/usr/bin/vncserver -kill %i > /dev/null 2>&1 || :'
ExecStart=/usr/bin/vncserver %i -geometry 1440x900 -alwaysshared -fg
ExecStop=/usr/bin/vncserver -kill %i


Start vncserver@:1.service and optionally enable it to run at boot time/shutdown.

Multi-user mode

One can use systemd socket activation in combination with XDMCP to automatically spawn VNC servers for each user who attempts to login, so there is no need to set up one server/port per user. This setup uses the display manager to authenticate users and login, so there is no need for VNC passwords. The downside is that users cannot leave a session running on the server and reconnect to it later.

To get this running, first set up XDMCP and make sure the display manager is running. Then create:

Description=XVNC Server


Description=XVNC Per-Connection Daemon

ExecStart=-/usr/bin/Xvnc -inetd -query localhost -geometry 1920x1080 -once -SecurityTypes=None

Use systemctl to start and enable xvnc.socket. Now any number of users can get unique desktops by connecting to port 5900.

If the VNC server is exposed to the internet, add the -localhost option to Xvnc in xvnc@.service (note that -query localhost and -localhost are different switches) and follow #Accessing vncserver via SSH tunnels. Since we only select a user after connecting, the VNC server runs as user nobody and uses Xvnc directly instead of the vncserver script, so any options in ~/.vnc are ignored. Optionally, autostart vncconfig so that the clipboard works (vncconfig exits immediately in non-VNC sessions). One way is to create:

vncconfig -nowin &

Running vncserver to directly control the local display

Using tigervnc's x0vncserver

The tigervnc package provides the x0vncserver binary which allows direct control over a physical X session. Invoke it like so:

$ x0vncserver -display :0 -passwordfile ~/.vnc/passwd

For more information see x0vncserver(1).

Starting and stopping x0vncserver via systemd

In order to have a VNC Server runnning x0vncserver, which is the easiest way for most users to quickly have remote access to the current desktop, you can create a systemd unit as follows replacing the user and the options with the desired ones:

Description=Remote desktop service (VNC)
After=syslog.target network.target

ExecStart=/usr/bin/sh -c '/usr/bin/x0vncserver -display :0 -rfbport 5900 -passwordfile /home/foo/.vnc/passwd &'

  • This unit will only be useful if the user in the unit is currently running a X session.
  • Do not run this service if your local area network is untrusted.

Using x11vnc

Another option is to use x11vnc which has the advantage or disadvantage, depending on one's perspective, of requiring root to initiate the access. For more, see: X11vnc.

Connecting to vncserver

Warning: It is ill-advised to connect insecurely to a vncserver outside of a trusted LAN. Note that TigerVNC is encrypted by default unless it is specifically instructed otherwise by setting SecurityTypes to a non-secure option, although this lacks identity verification and will not prevent man-in-the-middle attack during the connection setup. X509Vnc is the recommended option for a secure connection.

Any number of clients can connect to a vncserver. A simple example is given below where vncserver is running on port 5901, or :1 in shorthand notation:

$ vncviewer

Passwordless authentication

The -passwd switch allows one to define the location of the server's ~/.vnc/passwd file. It is expected that the user has access to this file on the server through SSH or through physical access. In either case, place that file on the client's file system in a safe location, i.e. one that has read access ONLY to the expected user.

$ vncviewer -passwd /path/to/server-passwd-file

Example GUI-based clients

TigerVNC's vncviewer also has a simple GUI when run without any parameters:

$ vncviewer

Accessing vncserver via SSH tunnels

For servers offering SSH connection, an advantage of this method is that it is not necessary to open any other port than the already opened SSH port to the outside, since the vnc traffic is tunneled through the SSH port. It is highly recommended to use the -localhost switch when running vncserver this way since it allows connections from the localhost only and by analogy, only from users ssh'ed and authenticated on the box.

Note: TigerVNC uses TLSVnc encryption by default, unless specifically instructed via the SecurityTypes parameter. Authentication and traffic is encrypted, but there is no identity verification. TigerVNC supports alternative encryption schemes such as X509Vnc that allows the client to verify the identity of the server. When SecurityTypes on the server side is set to a non-secure option as high-priority (such as None, VncAuth, Plain, TLSNone, TLSPlain, X509None, X509Plain; which is ill-advised), it is not possible to use encryption. In that case, one can tunnel over SSH. When running vncviewer, it is safer to explicitly set SecurityTypes and not accept any unencrypted traffic.

On the server

The vncserver must be run on the server, it is appropriate to use the -localhost flag to only allow connections from the same machine and stop all non-SSH connections from any other host. For example run a command line similar to:

$ vncserver -geometry 1440x900 -alwaysshared -dpi 96 -localhost :1

On the client

The VNC server has been setup on the remote machine to only accept local connections. Now, the client must open a secure shell with the remote machine ( in this example) and create a tunnel from the client port 5901 to the remote server 5901 port. For more details on this feature, see Secure Shell#Forwarding other ports and ssh(1).

$ ssh -L 5901:localhost:5901

Note that the port number on the server and the one on the client do not need to match. For example to forward the client port 8900 to the server port 5901:

$ ssh -L 8900:localhost:5901

Once connected via SSH, leave this shell window open since it is acting as the secured tunnel to/from server (or just run SSH in the background with the -f option). On the client side, to connect via this encrypted tunnel, point the vncviewer to the forwarded client port on the localhost.

Using the matched ports on the server/client:

$ vncviewer localhost:5901

Using different ports on the server/client:

$ vncviewer localhost:8900

What happens in practice is that the vncviewer connects locally to port 8900 which is tunneled to the server's localhost port 5901. The connection is established to the right port within the secure shell.

Connecting to a vncserver from Android devices over SSH

To connect to a VNC server over SSH using an Android device as a client, consider having the following setup:

  1. SSH running on the server
  2. vncserver running on server (with -localhost flag for security)
  3. SSH client on the Android device: ConnectBot is a popular choice and will be used in this guide as an example
  4. VNC client on the Android device: androidVNC used here

In ConnectBot, connect to the desired machine. Tap the options key, select Port Forwards and add a port:

Type: Local
Source port: 5901

In androidVNC connect to the VNC port, this is the local address following the SSH connection:

Password: the vncserver password
Port: 5901

Tips and tricks

Connecting to an OSX system

See https://help.ubuntu.com/community/AppleRemoteDesktop. Tested with Remmina.

Connecting to non-X environments on a Raspberry Pi (Arch ARM)

Install dispmanx_vncAUR on the Arch ARM device. Frame rates are not very high but it provides a working VNC access.

Recommended security settings

If not #Accessing vncserver via SSH tunnels where the identification and the encryption are handled via SSH, it is recommended to use X509Vnc, as TLSVnc lacks identity verification.

$ vncserver -x509key /path/to/key.pem -x509cert /path/to/cert.pem -SecurityTypes X509Vnc :1

Issuing x509 certificates is beyond the scope of this guide. However, Let's Encrypt provides an easy way to do so. Alternatively, one can issue certificates using OpenSSL, share the public key with the client and specify it with the -X509CA parameter. An example is given below the server is running on

$ vncviewer -X509CA /path/to/cert.pem

Toggling Fullscreen

This can be done through vncclient's Menu. By default, vncclient's Menu Key is F8.


Unable to type '<' character

If pressing < on a remote client emits the > character, try remapping the incoming key [1]:

$ x0vncserver -RemapKeys="0x3c->0x2c"

Black rectangle instead of window

Most probably it means that you use application that strictly requires Composite Xorg extension. For example webkit based app: midori, psi-plus, etc.

You should restart vncserver in this case using something like following:

 vncserver -geometry ... -depth 24 :1 +extension Composite

It looks like Composite extension in VNC will work only with 24bit depth.

No mouse cursor

If no mouse cursor is visible when using x0vncserver, start vncviewer as follows:

$ vncviewer DotWhenNoCursor=1 <server>

Or put DotWhenNoCursor=1 in the tigervnc configuration file, which is at ~/.vnc/default.tigervnc by default.

Copying clipboard content from the remote machine

If copying from the remote machine to the local machine does not work, run autocutsel on the server, as mentioned in [2]:

$ autocutsel -fork

Now press F8 to display the VNC menu popup, and select Clipboard: local -> remote option.

One can put the above command in ~/.vnc/xstartup to have it run automatically when vncserver is started.

See also