Toshiba Satellite A100-386
ACPI and Power Saving
Unlike older Toshiba laptops, this one has a PhoenixBIOS and will NOT work with the toshiba_acpi module nor utilities which make use of toshiba_acpi. The Omnibook project doesn't support this laptop just yet, as no documentation has been released by Toshiba. Anyway, there's a PKGBUILD for omnibook-svn in AUR. As a result, the FN hotkeys are unusable at the moment. But you can use the ACPI video module to control the brightness of the LCD screen:
$ modprobe video $ cat /proc/acpi/video/GFX0/LCD/brightness #get the available brightness levels $ echo 10 > /proc/acpi/video/GFX0/LCD/brightness # set the LCD brightness
The EasyGuard hard disk protection also has no Linux driver at the moment.
You can use one of powersave, powernowd, cpudyn, cpufreqd or similar utilities to control CPU frequency scaling with the speedstep_centrino module.
Intel Corp. Ethernet Controller. Use the e100 module.
Intel Corporation|PRO/Wireless 3945ABG. Install the driver for your kernel(s), daemon and microcode (and accept the license of the software):
$ pacman -Sy ipw3945 ipw3945d ipw3945-ucode
Add ipw3945d to your daemons array (you might want to start it before network though):
DAEMONS=(syslog-ng network netfs crond acpid ipw3945d dbus hal powersaved alsa mpd)
The latest alsa patch included in the ARCH kernel adds the definitions for Toshiba integrated sound cards. But I get really low volume with this one so I prefer to force the model to 3stack instead:
Add this line to /etc/modprobe.conf:
options snd-hda-intel model=3stack
NVIDIA GeForce Go 7300. Use the nvidia module if you want Direct Rendering or xf86-video-nv if you don't care/want to install proprietary drivers.
$ pacman -Sy nvidia or $ pacman -Sy xf86-video-nv
The Video BIOS doesn't have the 1280x800 resolution although X11 can use it without problems. So, no 1280x800 framebuffer for you. Sorry !
Working with the slmodem driver and ALSA.
It's a standard Synaptics touchpad. Just install the driver and follow the instructions.
pacman -Sy synaptics
SD card reader
Texas Instruments Card Reader. Use the tifm_sd module. Untested.
Untested but should work.
Works fine out-of-the-box.