Difference between revisions of "Toshiba Satellite L775D S7340"

From ArchWiki
Jump to: navigation, search
(added proper sleep fix, learned a bit about wiki formatting.)
m (added a fix for pulseaudio issues that are common to many laptops in my experience)
Line 110: Line 110:
  
 
'''Audio:'''
 
'''Audio:'''
Alsa does not work. The central speaker, PCM, won't show up under alsa until pulseaudio is installed. Pulseaudio works perfectly with the audio system, even enabling mic input without a hitch.  
+
Alsa does not work. The central speaker, PCM, won't show up under alsa until pulseaudio is installed. Pulseaudio works perfectly with the audio system, even enabling mic input without a hitch. If you hear no sound, don't panic. Pulseaudio in later versions will automatically set the hmdi port as the default audio output. The solution is to go in and change the sound output on a single application that should be playing sound to the non-hdmi card. Pulseaudio learns quickly.  
  
 
'''Webcam:'''
 
'''Webcam:'''

Revision as of 01:57, 28 December 2011

Hardware:

lspci:


 00:00.0 Host bridge: Advanced Micro Devices [AMD] Device 1705
 00:01.0 VGA compatible controller: ATI Technologies Inc Device 9647
 00:01.1 Audio device: ATI Technologies Inc Device 1714
 00:02.0 PCI bridge: Advanced Micro Devices [AMD] Device 1707
 00:11.0 SATA controller: Advanced Micro Devices [AMD] Hudson SATA Controller [AHCI mode] (rev 40)
 00:12.0 USB Controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11)
 00:12.2 USB Controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11)
 00:13.0 USB Controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11)
 00:13.2 USB Controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11)
 00:14.0 SMBus: Advanced Micro Devices [AMD] Hudson SMBus Controller (rev 13)
 00:14.1 IDE interface: Advanced Micro Devices [AMD] Hudson IDE Controller
 00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 01)
 00:14.3 ISA bridge: Advanced Micro Devices [AMD] Hudson LPC Bridge (rev 11)
 00:14.4 PCI bridge: Advanced Micro Devices [AMD] Hudson PCI Bridge (rev 40)
 00:15.0 PCI bridge: Advanced Micro Devices [AMD] Device 43a0
 00:15.1 PCI bridge: Advanced Micro Devices [AMD] Device 43a1
 00:15.2 PCI bridge: Advanced Micro Devices [AMD] Device 43a2
 00:16.0 USB Controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11)
 00:16.2 USB Controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11)
 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43)
 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1
 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2
 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3
 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4
 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6
 00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5
 00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7
 04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 


lsusb:

 Bus 002 Device 002: ID 04f2:b289 Chicony Electronics Co., Ltd 
 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 Bus 003 Device 002: ID 05ac:1293 Apple, Inc. iPod Touch 2.Gen
 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub



Known Errors:

Touchpad and Keyboard Aren't working The solution is to add i8042.nomux=1 i8042.reset to the end of the kernel line of the grub menu config at

/boot/grub/menu.lst

Example:

# (0) Arch Linux

title  Arch Linux

root   (hd0,2)

kernel /boot/vmlinuz-linux root=/dev/sda3 ro i8042.nomux=1 i8042.reset nomodeset quiet vga=0

initrd /boot/initramfs-linux.img


Graphics: This model has the a6-3400m apu with an integrated radeon HD 6520g. This is problematic during the livecd install. If you do not hit tab at the arch boot screen and add "radeon.modeset=0" to the kernel line, you will end up with a black screen. After install, use the proprietary Catalyst driver, as the opensource one has multiple problems.

Audio: Alsa does not work. The central speaker, PCM, won't show up under alsa until pulseaudio is installed. Pulseaudio works perfectly with the audio system, even enabling mic input without a hitch. If you hear no sound, don't panic. Pulseaudio in later versions will automatically set the hmdi port as the default audio output. The solution is to go in and change the sound output on a single application that should be playing sound to the non-hdmi card. Pulseaudio learns quickly.

Webcam: It is a v4l2 webcam, works perfectly.

Hibernate/Suspend: There is a problem in which trying to sleep will cause a black screen, followed by flickers which persist until an acpi poweroff. Upon booting, the laptop will not make it to the bios until the battery and charger are removed. The fix for this is documented at

[http://thecodecentral.com/2011/01/18/fix-ubuntu-10-10-suspendhibernate-not-working-bug ]

Step 1: Create a file at /etc/pm/sleep.d/20_custom-ehci_hcd, with the following code:

#!/bin/sh
#inspired by http://art.ubuntuforums.org/showpost.php?p=9744970&postcount=19
#...and http://thecodecentral.com/2011/01/18/fix-ubuntu-10-10-suspendhibernate-not-working-bug    
# tidied by tqzzaa :)

VERSION=1.1
DEV_LIST=/tmp/usb-dev-list
DRIVERS_DIR=/sys/bus/pci/drivers
DRIVERS="ehci xhci" # ehci_hcd, xhci_hcd
HEX="xdigit:"
MAX_BIND_ATTEMPTS=2
BIND_WAIT=0.1

unbindDev() {
  echo -n > $DEV_LIST 2>/dev/null
  for driver in $DRIVERS; do
    DDIR=$DRIVERS_DIR/${driver}_hcd
    for dev in `ls $DDIR 2>/dev/null | egrep "^$HEX+:$HEX+:$HEX"`; do
      echo -n "$dev" > $DDIR/unbind
      echo "$driver $dev" >> $DEV_LIST
    done
  done
}

bindDev() {
  if [ -s $DEV_LIST ]; then
    while read driver dev; do
      DDIR=$DRIVERS_DIR/${driver}_hcd
      while [ $((MAX_BIND_ATTEMPTS)) -gt 0 ]; do
          echo -n "$dev" > $DDIR/bind
          if [ ! -L "$DDIR/$dev" ]; then
            sleep $BIND_WAIT
          else
            break
          fi
          MAX_BIND_ATTEMPTS=$((MAX_BIND_ATTEMPTS-1))
      done  
    done < $DEV_LIST
  fi
  rm $DEV_LIST 2>/dev/null
}

case "$1" in
  hibernate|suspend) unbindDev;;
  resume|thaw)       bindDev;;
esac

Step 2: Make this file executable with this command:

sudo chmod 755 /etc/pm/sleep.d/20_custom-ehci_hcd

Step 3: Enjoy. The screen still flickers, but the laptop goes into proper sleep.