Toshiba Satellite R830

From ArchWiki
Revision as of 08:56, 13 August 2016 by Entodoays (talk | contribs) (→‎Brightness control after Suspend and resume: Updated recent information)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Wi-Fi & Ethernet

Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) and Intel Corporation 82579V Gigabit Ethernet with kernel 3.8 work out of the box.


xbacklight from xorg-xbacklight works fine.

Brightness control after Suspend and resume

Brightness control works until sleep but after resume it does not.

In the past, adding acpi_osi=Linux acpi_backlight=vendor to kernel-line (see Kernel Parameters[broken link: invalid section]) helped me.

A better solution that works on all DEs I've tested (XFCE,Gnome, Cinnamon) is using the video.disable_backlight_sysfs_if=1 kernel paramater. This should not be combined with the previously-mentioned kernel parameters.

There is another solution here:

Another possibility is using a custom xorg configuration file. (Ignored by Gnome 3.16+)

In a terminal type:

    sudo touch /usr/share/X11/xorg.conf.d/20-intel.conf

Now edit this file:

    sudo xdg-open /usr/share/X11/xorg.conf.d/20-intel.conf

Type the following code:

   Section "Device"
       Identifier  "card0"
       Driver      "intel"
       Option      "Backlight"  "intel_backlight"
       BusID       "PCI:0:2:0"

Save the file; log out and in again.

As of Kernel version 4.4, there is no need to change kernel boot parameters or or create xorg.conf files.