Difference between revisions of "Touchpad Synaptics"

From ArchWiki
Jump to: navigation, search
m (Firefox misinterprets horizontal scrolling)
Line 103: Line 103:
<pre>mousewheel.horizscroll.withnokey.action = 1
<pre>mousewheel.horizscroll.withnokey.action = 1
mousewheel.horizscroll.withnokey.sysnumlines = true</pre>
mousewheel.horizscroll.withnokey.sysnumlines = true</pre>
You can edit them by opening '''about:config'''. (Tip taken from [http://gentoo-wiki.com/HARDWARE_Synaptics_Touchpad#Horizontal_Scroll_Issues_with_Firefox|gentoo wiki].)
You can edit them by opening '''about:config'''. (Tip taken from [http://gentoo-wiki.com/HARDWARE_Synaptics_Touchpad#Horizontal_Scroll_Issues_with_Firefox gentoo wiki].)

Revision as of 14:43, 11 April 2007

What is this ?

This tutorial will help install and make your touchpad work properly on your laptop machine.

Loading appropriate modules

Both evdev and psmouse kernel modules have to be loaded in memory. You can check their presence by typing in a console :


In case of problem with these modules, add the following in the MODULES line of your /etc/rc.conf :

MODULES = (... evdev psmouse ...)

Driver installation

As root user type in a console:

pacman -S synaptics

Additional packages may be installed too for graphical post-configuration of the touchpad : ksynaptics (for KDE), gsynaptics (for GNOME). Gsynaptics is in the community repository, which is not enabled by default.

Checking for the right device name

Type in a console :

cat /proc/bus/input/devices

The device name is in the Handlers line of the Synaptics / ALPS block.

I: Bus=0011 Vendor=0002 Product=0007 Version=0000
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio4/input0
S: Sysfs=/class/input/input1
H: Handlers=mouse0 event1 
B: EV=b
B: KEY=6420 0 7000f 0 0 0 0 0 0 0 0
B: ABS=11000003

e.g. H: Handlers=mouse0 event1

in this example case the Device Option in the xorg.conf will be :

Option      "Device" "/dev/input/mouse0"

xorg.conf configuration

Add the followings lines in the following sections of /etc/X11/xorg.conf :

Section "Module" :

Load "synaptics"

Section "ServerLayout" :

InputDevice "Touchpad" "AlwaysCore"

Note : ServerLayout Section may only contain one "CorePointer" entry. If another pointer is to be used, use "AlwaysCore". There is only one CorePointer allowed...

Create a new "InputDevice" section for the touchpad:

Section "InputDevice"
        Identifier  "Touchpad"
        Driver      "synaptics"
        Option      "Device" "/dev/input/mouse0"
        Option      "Protocol" "auto-dev"
        Option      "LeftEdge" "1700"
        Option      "RightEdge" "5300"
        Option      "TopEdge" "1700"
        Option      "BottomEdge" "4200"
        Option      "FingerLow" "25"
        Option      "FingerHigh" "30"
        Option      "MaxTapTime" "180"
        Option      "MaxTapMove" "220"
        Option      "VertScrollDelta" "100"
        Option      "MinSpeed" "0.06"
        Option      "MaxSpeed" "0.12"
        Option      "AccelFactor" "0.0010"
        Option      "SHMConfig" "on"


Firefox misinterprets horizontal scrolling

Even though this problem isn't concerning the synaptics drivers, you will probably look up here for a solution anyway. To prevent firefox from "scrolling" the history and make it scroll the site, you have to set the following settings:

mousewheel.horizscroll.withnokey.action = 1
mousewheel.horizscroll.withnokey.sysnumlines = true

You can edit them by opening about:config. (Tip taken from gentoo wiki.)


Synaptics TouchPad driver for XOrg/XFree86 : [1]