Difference between revisions of "USB flash installation media"

From ArchWiki
Jump to navigation Jump to search
(→‎In macOS: Changing M to m as the former results in dd: bs: illegal numeri value in Catalina)
 
(511 intermediate revisions by more than 100 users not shown)
Line 1: Line 1:
[[Category:Getting and installing Arch (English)]]
+
[[Category:Installation process]]
[[Category:HOWTOs (English)]]
+
[[ar:USB flash installation media]]
 +
[[bg:USB flash installation media]]
 +
[[de:Installation von einem USB-Stick]]
 +
[[es:USB flash installation media]]
 +
[[fr:Créer une clef USB avec l'ISO Arch Linux]]
 +
[[it:USB flash installation media]]
 +
[[ja:USB インストールメディア]]
 +
[[pt:USB flash installation media]]
 +
[[ru:USB flash installation media]]
 +
[[zh-hans:USB flash installation media]]
 +
[[zh-hant:USB flash installation media]]
 +
{{Related articles start}}
 +
{{Related|CD Burning}}
 +
{{Related|Archiso}}
 +
{{Related|Multiboot USB drive}}
 +
{{Related articles end}}
  
 +
This page discusses various multi-platform methods on how to create an Arch Linux Installer USB drive (also referred to as ''"flash drive", "USB stick", "USB key"'', etc) for booting in BIOS and UEFI systems. The result will be a LiveUSB (LiveCD-like) system that can be used for installing Arch Linux, system maintenance or for recovery purposes, and that, because of the nature of [[Wikipedia:SquashFS|SquashFS]], will discard all changes once the computer shuts down.
  
== The New and Improved Way, on Linux ==
+
If you would like to run a full install of Arch Linux from a USB drive (i.e. with persistent settings), see [[Installing Arch Linux on a USB key]]. If you would like to use your bootable Arch Linux USB stick as a rescue USB, see [[Change root]].
  
Beginning from release 2008.06, USB images are provided. Download them from your [http://archlinux.org/download/ local mirror] (they are the .img files). To install, use the following command:
+
== BIOS and UEFI bootable USB ==
  
dd if=image.img of=/dev/sd[x]
+
=== Using automatic tools ===
  
where ''image.img'' is the path to the img file and ''/dev/sd[x]'' is your USB device. Make sure to use /dev/sdx and not /dev/sdx1.
+
==== In GNU/Linux ====
  
'''Note:''' This will irrevocably delete all files on your USB stick, so make sure you don't have any important files on the stick before doing this.
+
===== Using dd =====
  
== The New and Improved Way, on Windows ==
+
{{Note|This method is recommended due to its simplicity. If it does not work, switch to the alternative method [[#Using manual formatting]] below.}}
  
To write the USB image on Windows, you will need [http://shounen.ru/soft/flashnul/ flashnul] ([http://translate.google.com/translate?u=http%3A%2F%2Fshounen.ru%2Fsoft%2Fflashnul%2F&hl=en&ie=UTF8&sl=ru&tl=en English version of the page]) or [http://www.cygwin.com/ Cygwin].
+
{{Warning|This will irrevocably destroy all data on {{ic|/dev/'''sdx'''}}. To restore the USB drive as an empty, usable storage device after using the Arch ISO image, the ISO 9660 filesystem signature needs to be removed by running {{ic|wipefs --all /dev/'''sdx'''}} as root, before [[repartition]]ing and [[reformat]]ing the USB drive.}}
  
=== The Flashnul Way ===
+
{{Tip|Find out the name of your USB drive with {{ic|lsblk}}. Make sure that it is '''not''' mounted.}}
  
From a command prompt, invoke flashnul with -p, and determine which device index is your USB drive. For example, my output looks like this:
+
Run the following command, replacing {{ic|/dev/'''sdx'''}} with your drive, e.g. {{ic|/dev/sdb}}. (Do '''not''' append a partition number, so do '''not''' use something like {{ic|/dev/sdb'''1'''}})
  
  C:\>flashnul -p
+
  # dd bs=4M if=path/to/archlinux.iso of=/dev/'''sdx''' status=progress oflag=sync
 
Avaible [sic] physical drives:
 
0      size = 200048565760 (186 Gb)
 
1      size = 400088457216 (372 Gb)
 
2      size = 400088457216 (372 Gb)
 
3      size = 4060086272 (3872 Mb)
 
  
In my case, with a 4 GB USB drive, it is device index 3.
+
See {{man|1|dd}} for more information about [[dd]]. See {{man|1|dd|DESCRIPTION}} for more information about {{ic|1=oflag=sync}}.
  
When you have determined which device is the correct one, you can write the image to your drive, by invoking flashnul with the device index, -L, and the path to your image. In my case, it would be
+
{{Tip|If the UEFI version of the USB's Arch ISO hangs or is unable to load, try repeating the [[dd]] media creation process on the same USB drive one or more times.}}
  
C:\>flashnul 3 -L path/to/arch/usb.img
+
===== Using etcher =====
  
As long as you are really sure you want to write the data, type yes, then wait a bit for it to write. If you get an access denied error, unplugging and re-attaching the drive worked for me.
+
[https://etcher.io/ Etcher] is a OS image flasher built with node.js and Electron, capable of flashing an SDCard or USB drive. It protects you from accidentally writing to your hard-drives and ensures every byte of data was written correctly. There are 6 related packages in the AUR.
  
<b>Note!</b>
+
===== Using Kindd =====
<i>I had to do "C:\flashnul\flashnul.exe <b>H:</b> -L c:\archlinux-2008.06-core-i686.img" for it to work. I kept getting access denied if i just used the number. -gejr </i>
 
  
=== The Cygwin Way ===
+
[https://github.com/LinArcX/Kindd Kindd] is a Qt based graphical frontend for dd. It is available as {{AUR|kindd}}.
  
Make sure your cygwin installation contains the dd package.
+
==== In Windows ====
  
Place your image file in your home directory, in my case it is:
+
===== Using Rufus =====
 +
 
 +
[https://rufus.akeo.ie/ Rufus] is a multi-purpose USB ISO writer. It provides a graphical user interface and does not care if the drive is properly formatted or not.
 +
 
 +
Simply select the Arch Linux ISO, the USB drive you want to create the bootable Arch Linux onto and click ''START''.
 +
 
 +
{{Note|If the USB drive does not boot properly using the default ISO Image mode, '''DD Image mode''' should be used instead.
 +
* For Rufus version ≥ 3.0 select ''GPT'' from the ''Partition scheme'' drop-down menu. After clicking ''START'' you will get the mode selection dialog, select ''DD Image mode''.
 +
* For Rufus version < 3.0 select ''DD Image'' mode from the drop-down menu on the bottom.
 +
}}
 +
 
 +
{{Tip|To add [https://github.com/pbatard/rufus/issues/691 an additional partition for persistent storage] use the slider to choose the persistent partition's size. When using the persistent partition feature, make sure to select ''MBR'' in the ''Partition scheme'' drop-down menu and ''BIOS or UEFI'' in ''Target System'', otherwise the drive will not be usable for both BIOS and UEFI booting.}}
 +
 
 +
===== Using USBwriter =====
 +
 
 +
This method does not require any workaround and is as straightforward as {{ic|dd}} under Linux. Just download the Arch Linux ISO, and with local administrator rights use the [https://sourceforge.net/p/usbwriter/wiki/Documentation/ USBwriter] utility to write to your USB flash memory.
 +
 
 +
===== Using win32diskimager =====
 +
 
 +
[https://sourceforge.net/projects/win32diskimager/ win32diskimager] is another graphical USB iso writing tool for Windows. Simply select your iso image and the target USB drive letter (you may have to format it first to assign it a drive letter), and click Write.
 +
 
 +
===== Using Cygwin =====
 +
 
 +
Make sure your [https://www.cygwin.com/ Cygwin] installation contains the {{ic|dd}} package.
 +
 
 +
{{Tip|If you do not want to install Cygwin, you can download {{ic|dd}} for Windows from [http://www.chrysocome.net/dd here]. See the next section for more information.}}
 +
 
 +
Place your image file in your home directory:
  
 
  C:\cygwin\home\John\
 
  C:\cygwin\home\John\
Line 50: Line 86:
 
Run cygwin as administrator (required for cygwin to access hardware). To write to your USB drive use the following command:
 
Run cygwin as administrator (required for cygwin to access hardware). To write to your USB drive use the following command:
  
  dd if=image.img of=\\.\[x]:
+
  dd if=image.iso of=\\.\'''x''': bs=4M
 +
 
 +
where image.iso is the path to the iso image file within the {{ic|cygwin}} directory and {{ic|\\.\'''x''':}} is your USB flash drive where {{ic|'''x'''}} is the windows designated letter, e.g. {{ic|\\.\d:}}.
 +
 
 +
On Cygwin 6.0, find out the correct partition with:
 +
 
 +
cat /proc/partitions
 +
 
 +
and write the ISO image with the information from the output. Example:
 +
 
 +
{{Warning|This will irrevocably delete all files on your USB flash drive, so make sure you do not have any important files on the flash drive before doing this.}}
 +
 
 +
dd if=image.iso of=/dev/sdb bs=4M
 +
 
 +
===== dd for Windows =====
 +
 
 +
A GPL licensed dd version for Windows is available at http://www.chrysocome.net/dd. The advantage of this over Cygwin is a smaller download. Use it as shown in instructions for Cygwin above.
 +
 
 +
To begin, download the latest version of dd for Windows. Once downloaded, extract the archive's contents into Downloads or elsewhere.
 +
 
 +
Now, launch your {{ic|command prompt}} as an administrator. Next, change directory ({{ic|cd}}) into the Downloads directory.
 +
 
 +
If your Arch Linux ISO is elsewhere you may need to state the full path, for convenience you may wish to put the Arch Linux ISO into the same folder as the dd executable. The basic format of the command will look like this.
 +
 
 +
# dd if=''archlinux-''version''-x86_64.iso'' od=\\.\''x'': bs=4M
 +
 
 +
{{Note|The Windows drive letters are linked to a partition. To allow selecting the entire disk, ''dd for Windows'' provides the {{ic|od}} parameter, which is used in the commands above. Note however that this parameter is specific to ''dd for Windows'' and cannot be found in other implementations of ''dd''.}}
 +
 
 +
{{Warning|Because the {{ic|od}} is used, all partitions on the selected disk will be destroyed. Be absolutely sure that you are directing dd to the correct drive before executing.}}
 +
 
 +
Simply replace the various null spots (indicated by an "x") with the correct date and correct drive letter. Here is a complete example.
 +
 
 +
# dd if=ISOs\archlinux-''version''-x86_64.iso od=\\.\d: bs=4M
 +
 
 +
{{Accuracy|The following note may be invalid, the [http://www.chrysocome.net/dd upstream documentation] does not mention anything related to ''PhysicalDrive''.|section=dd for windows}}
 +
 
 +
{{Note|Alternatively, replace the drive letter with {{ic|\\.\PhysicalDrive''X''}}, where {{ic|''X''}} is the physical drive number (starts from 0). Example:
 +
{{bc|1=# dd if=ISOs\archlinux-''version''-x86_64.iso of=\\.\PhysicalDrive1 bs=4M}}
 +
You can find out the physical drive number by typing {{ic|wmic diskdrive list brief}} at the command prompt or with {{ic|dd --list}}
 +
Any Explorer window must be closed or dd will report an error.}}
 +
 
 +
==== In macOS ====
 +
 
 +
First, you need to identify the USB device. Open {{ic|/Applications/Utilities/Terminal}} and list all storage devices with the command:
 +
 
 +
$ diskutil list
 +
 
 +
Your USB device will appear as something like {{ic|/dev/disk2 (external, physical)}}. Verify that this is the device you want to erase by checking its name and size and then use its identifier for the commands below instead of /dev/diskX.
 +
 
 +
A USB device is normally auto-mounted in macOS, and you have to unmount (not eject) it before block-writing to it with {{ic|dd}}. In Terminal, do:
 +
 
 +
$ diskutil unmountDisk /dev/diskX
 +
 
 +
Now copy the ISO image file to the device. The {{ic|dd}} command is similar to its Linux counterpart, but notice the 'r' before 'disk' for raw mode which makes the transfer much faster:
 +
 
 +
{{Accuracy|1=It does not seem clear whether there should be {{ic|1=bs=1M}} or {{ic|1=bs=1m}}. [https://wiki.archlinux.org/index.php?title=USB_flash_installation_media&diff=544886&oldid=543750][https://wiki.archlinux.org/index.php?title=USB_flash_installation_media&diff=next&oldid=578856]|section=Repeated editions, back and forth}}
 +
 
 +
# dd if=path/to/arch.iso of=/dev/'''r'''diskX bs=1m
 +
 
 +
This command will run silently. To view progress, send SIGINFO by pressing {{ic|Ctrl+t}}. Note {{ic|diskX}} here should not include the {{ic|s1}} suffix, or else the USB device will only be bootable in UEFI mode and not legacy. After completion, macOS may complain that "The disk you inserted was not readable by this computer". Select 'Ignore'. The USB device will be bootable.
 +
 
 +
==== In Android ====
 +
 
 +
===== EtchDroid =====
 +
 
 +
[https://etchdroid.depau.eu/ EtchDroid] is a OS image flasher for Android. It works without root permissions on Android 5 to Android 8. According to bug reports it doesn't always work on Android 9 and Android 4.4.
 +
 
 +
To create an Arch Linux installer, download the ISO image file on your Android device. Plug the USB drive to your device, using a USB-OTG adapter if needed. Open EtchDroid, select "Flash raw image", select your Arch ISO, then select your USB drive. Grant the USB API permission and confirm.
 +
 
 +
Keep your phone on a table while it's writing the image: a lot of USB-OTG adapters are a bit wobbly and you might unplug it by mistake.
 +
 
 +
=== Using manual formatting===
 +
 
 +
==== In GNU/Linux ====
 +
 
 +
This method is more complicated than writing the image directly with {{ic|dd}}, but it does keep the flash drive usable for data storage (that is, the ISO is installed in a specific partition within the already [[Partitioning|partitioned device]] without altering other partitions).
 +
 
 +
{{Note|Here, we will denote the targeted partition as {{ic|/dev/sd'''Xn'''}}. In any of the following commands, adjust '''X''' and '''n''' according to your system.}}
 +
 
 +
* If not done yet, create a [[partition table]] on {{ic|/dev/sd'''X'''}}.
 +
* If not done yet, create a partition on the device. The partition {{ic|/dev/sd'''Xn'''}} must be formatted to [[FAT32]].
 +
* Mount the ISO image, mount the FAT32 filesystem located in the USB flash device, and copy the contents of the ISO image to it. Then unmount the ISO image, but keep the FAT32 partition mounted (this may be used in subsequent steps). For example:
 +
 
 +
# mkdir -p /mnt/{iso,usb}
 +
# mount -o loop archlinux-''version''-x86_64.iso /mnt/iso
 +
# mount /dev/sd'''Xn''' /mnt/usb
 +
# cp -a /mnt/iso/* /mnt/usb
 +
# sync
 +
# umount /mnt/iso
 +
 
 +
To boot either a label or an [[UUID]] to select the partition to boot from is required. By default the label {{ic|ARCH_''YYYYMM''}} (with the appropriate release year and month) is used. Thus, the [[Persistent block device naming#by-label|file system’s label]] has to be set accordingly, for example using ''gparted''. Alternatively, you can change this behaviour by altering the lines ending by {{ic|1=archisolabel=ARCH_''YYYYMM''}} in the file {{ic|/mnt/usb/arch/boot/syslinux/archiso_sys.cfg}} (for BIOS boot), and in {{ic|/mnt/usb/loader/entries/archiso-x86_64.conf}} (for UEFI boot). To use an UUID instead, replace those portions of lines with {{ic|1=archiso''device''=/dev/disk/by-uuid/'''YOUR-UUID'''}}. The UUID can be retrieved with {{ic|1=blkid -o value -s UUID /dev/sd'''Xn'''}}.
 +
 
 +
{{Warning|Mismatching labels or wrong UUID prevents booting from the created medium.}}
 +
 
 +
Syslinux files for BIOS systems are already copied to {{ic|/mnt/usb/arch/boot/syslinux}}. Install the {{Pkg|syslinux}} package and follow [[Syslinux#Manual install]] instructions to make the partition bootable.
 +
 
 +
==== In Windows ====
 +
 
 +
{{Note|
 +
* For manual formatting, do not use any '''Bootable USB Creator utility''' for creating the UEFI bootable USB. For manual formatting, do not use ''dd for Windows'' to dd the ISO to the USB drive either.
 +
* In the below commands, '''X:''' is assumed to be the USB flash drive in Windows.
 +
* Windows uses backward slash {{ic|\}} as path-separator, so the same is used in the below commands.
 +
* All commands should be run in Windows command prompt '''as administrator'''.
 +
* {{ic|>}} denotes the Windows command prompt.
 +
}}
 +
 
 +
* Partition and format the USB drive using [https://rufus.akeo.ie/ Rufus USB partitioner]. Select partition scheme option as '''MBR for BIOS and UEFI''' and File system as '''FAT32'''. Uncheck "Create a bootable disk using ISO image" and "Create extended label and icon files" options.
 +
* Change the '''Volume Label''' of the USB flash drive {{ic|X:}} to match the LABEL mentioned in the {{ic|1=archisolabel=}} part in {{ic|<ISO>\loader\entries\archiso-x86_64.conf}}. This step is required for Official ISO ([[Archiso]]). This step can be also performed using Rufus, during the prior "partition and format" step.
 +
* Extract the ISO (similar to extracting ZIP archive) to the USB flash drive using [https://www.7-zip.org/ 7-Zip].
 +
* Download official Syslinux 6.xx binaries (zip file) from https://www.kernel.org/pub/linux/utils/boot/syslinux/  and extract it. The version of Syslinux should be the same version used in the ISO image.
 +
 
 +
* Run the following command (in Windows cmd prompt, as admin):
 +
 
 +
> cd bios\
 +
> for /r %Y in (*.c32) do copy "%Y" "X:\arch\boot\syslinux\" /y
 +
> copy mbr\*.bin X:\arch\boot\syslinux\ /y
 +
 
 +
* Install Syslinux to the USB by running (use {{ic|win64\syslinux64.exe}} for x64 Windows):
 +
 
 +
> cd bios\
 +
> win32\syslinux.exe -d /arch/boot/syslinux -i -a -m X:
 +
 
 +
{{Note|
 +
* The above step installs Syslinux's {{ic|ldlinux.sys}} to the VBR of the USB partition, sets the partition as "active/boot" in the MBR partition table and writes the MBR boot code to the 1st 440-byte boot code region of the USB.
 +
* The {{ic|-d}} switch expects a path with forward slash path-separator like in *unix systems.
 +
}}
 +
 
 +
== Other methods for BIOS systems ==
 +
 
 +
=== In GNU/Linux ===
 +
 
 +
==== Using a multiboot USB drive ====
 +
 
 +
This allows booting multiple ISOs from a single USB device, including the archiso. Updating an existing USB drive to a more recent ISO is simpler than for most other methods. See [[Multiboot USB drive]].
 +
 
 +
==== Using GNOME Disk Utility ====
 +
 
 +
Linux distributions running GNOME can easily make a live CD through {{Pkg|nautilus}} and {{Pkg|gnome-disk-utility}}.  Simply right-click on the ''.iso'' file, and select ''Open With Disk Image Writer''.  When GNOME Disk Utility opens, specify the flash drive from the ''Destination'' drop-down menu and click ''Start Restoring''.
 +
 
 +
==== Making a USB-ZIP drive ====
 +
 
 +
For some old BIOS systems, only booting from USB-ZIP drives is supported. This method allows you to still boot from a USB-HDD drive.
 +
 
 +
{{Warning|This will destroy all information on your USB flash drive!}}
 +
 
 +
* Download {{Pkg|syslinux}} and {{Pkg|mtools}} from the official repositories.
 +
* Find your usb drive with {{ic|lsblk}}.
 +
* Type {{ic|mkdiskimage -4 /dev/sd'''x''' 0 64 32}} (replace x with the letter of your drive). This will take a while.
 +
 
 +
From here continue with the manual formatting method. The partition will be {{ic|/dev/sd'''x'''4}} due to the way ZIP drives work.
 +
 
 +
{{Note|Do not format the drive as FAT32; keep it as FAT16.}}
 +
 
 +
==== Using UNetbootin ====
 +
 
 +
UNetbootin can be used on any Linux distribution or Windows to copy your iso to a USB device. However, Unetbootin overwrites {{ic|syslinux.cfg}}, so it creates a USB device that does not boot properly. For this reason, '''Unetbootin is not recommended''' -- please use {{ic|dd}} or one of the other methods discussed in this topic.
 +
 
 +
{{Warning|UNetbootin writes over the default {{ic|syslinux.cfg}}; this must be restored before the USB device will boot properly.}}
 +
 
 +
Edit {{ic|syslinux.cfg}}:
 +
 
 +
{{hc|sysconfig.cfg|2=
 +
default menu.c32
 +
prompt 0
 +
menu title Archlinux Installer
 +
timeout 100
 +
 
 +
label unetbootindefault
 +
menu label Archlinux_x86_64
 +
kernel /arch/boot/x86_64/vmlinuz
 +
append initrd=/arch/boot/x86_64/archiso.img archisodevice=/dev/sd'''x1''' ../../
 +
}}
 +
 
 +
In {{ic|/dev/sd'''x1'''}} you must replace '''x''' with the first free letter after the last letter in use on the system where you are installing Arch Linux (e.g. if you have two hard drives, use {{ic|c}}.). You can make this change during the first phase of boot by pressing {{ic|Tab}} when the menu is shown.
 +
 
 +
=== In Windows ===
 +
 
 +
==== The Flashnul way ====
 +
 
 +
[https://translate.google.com/translate?hl=&sl=ru&tl=en&u=http%3A%2F%2Fshounen.ru%2Fsoft%2Fflashnul%2Freadme.rus.html&sandbox=1 flashnul] is an utility to verify the functionality and maintenance of Flash-Memory (USB-Flash, IDE-Flash, SecureDigital, MMC, MemoryStick, SmartMedia, XD, CompactFlash etc).
 +
 
 +
From a command prompt, invoke flashnul with {{ic|-p}}, and determine which device index is your USB drive, e.g.:
 +
 
 +
{{hc|C:\>flashnul -p|
 +
Avaible physical drives:
 +
Avaible logical disks:
 +
C:\
 +
D:\
 +
E:\
 +
}}
 +
 
 +
When you have determined which device is the correct one, you can write the image to your drive, by invoking flashnul with the device index, {{ic|-L}}, and the path to your image, e.g:
 +
 
 +
C:\>flashnul '''E:''' -L ''path\to\arch.iso''
 +
 
 +
As long as you are really sure you want to write the data, type yes, then wait a bit for it to write. If you get an access denied error, close any Explorer windows you have open.
  
where image.img is the path to the img file within the cygwin directory and \\.\[x]: is your USB device where x is the windows designated letter, in my case "\\.\d:".
+
If under Vista or Win7, you should open the console as administrator, or else flashnul will fail to open the stick as a block device and will only be able to write via the drive handle windows provides
  
'''Note:''' This will irrevocably delete all files on your USB stick, so make sure you don't have any important files on the stick before doing this.
+
{{Note|Confirmed that you need to use drive letter as opposed to number. flashnul 1rc1, Windows 7 x64.}}
  
==Old Method from ISO, deprecated==
+
==== Loading the installation media from RAM ====
*Prepare USB stick:
 
The arch-ftp.img is about 150 MB, so it should fit on a 256 MB USB stick. The arch-core.img  is ~300 MB and should fit on a 512 MB stick.
 
  
1. Partition the USB stick.
+
{{Merge|Multiboot USB drive#Using Syslinux and memdisk|This is the same method, only Syslinux is installed from Windows. Considering that [[multiboot USB drive]] can be used to boot an installation media and it is already linked from the Related articles box at the top, maybe this section should be merged there?}}
Create one partition with FAT16 type, make it bootable. Remember its name, such as /dev/sd[x]1.
 
  
cfdisk /dev/sd[x]
+
This method uses [[Syslinux]] and a [[Ramdisk]] ([https://wiki.syslinux.org/wiki/index.php/MEMDISK MEMDISK]) to load the entire Arch Linux ISO image into RAM. Since this will be running entirely from system memory, you will need to make sure the system you will be installing this on has an adequate amount. A minimum amount of RAM between 500 MB and 1 GB should suffice for a MEMDISK based, Arch Linux install.
  
2. Make a FAT16 filesystem (you need dosfstools)
+
For more information on Arch Linux system requirements as well as those for MEMDISK see the [[Installation guide]] and [http://www.etherboot.org/wiki/bootingmemdisk#preliminaries here]. For reference, here is the [https://bbs.archlinux.org/viewtopic.php?id=135266 preceding forum thread].
 
mkdosfs /dev/sd[x]1
 
  
3. Get the arch-base install ISO from www.archlinux.org
+
{{Tip|Once the installer has completed loading you can simply remove the USB stick and even use it on a different machine to start the process all over again. Utilizing MEMDISK also allows booting and installing Arch Linux to and from the same USB flash drive.}}
  
4. Mount the iso to an temporary directory
+
===== Preparing the USB flash drive =====
  
mkdir -p /mnt/archcd
+
Begin by formatting the USB flash drive as '''FAT32'''. Then create the following folders on the newly formatted drive.
mount -o loop /Path/to/iso /mnt/archcd
 
  
5. Mount the USB Stick
+
* {{ic|Boot}}
 +
** {{ic|Boot/ISOs}}
 +
** {{ic|Boot/Settings}}
  
mkdir -p /mnt/usb/
+
===== Copy the needed files to the USB flash drive =====
mount /dev/sd[x]1 /mnt/usb/
 
  
6. Copy the .iso to the USB Stick
+
Next copy the ISO that you would like to boot to the {{ic|Boot/ISOs}} folder. After that, extract from the following files from the latest release of {{pkg|syslinux}} from [https://www.kernel.org/pub/linux/utils/boot/syslinux/ here] and copy them into the following folders.
 +
* {{ic|./win32/syslinux.exe}} to the Desktop or Downloads folder on your system.
 +
* {{ic|./memdisk/memdisk}} to the {{ic|Settings}} folder on your USB flash drive.
  
cp -ra /mnt/archcd/* /mnt/usb/
+
===== Create the configuration file =====
  
 +
After copying the needed files, navigate to the USB flash drive, /boot/Settings and create a {{ic|syslinux.cfg}} file.
  
7. Copy the boot data
+
{{Warning|On the {{ic|INITRD}} line, be sure to use the name of the ISO file that you copied to your {{ic|ISOs}} folder.}}
  
cd /mnt/usb/isolinux/
+
{{hc|/Boot/Settings/syslinux.cfg|2=
cp vmlinuz /mnt/usb/
+
DEFAULT arch_iso
cp initrd.img /mnt/usb/
 
cp boot.* /mnt/usb/
 
cp isolinux.cfg /mnt/usb/syslinux.cfg
 
  
8. Install MBR and syslinux<sup>(1)</sup>
+
LABEL arch_iso
 +
        MENU LABEL Arch Setup
 +
        LINUX memdisk
 +
        INITRD /Boot/ISOs/archlinux-''version''-x86_64.iso
 +
        APPEND iso
 +
}}
  
lilo -M /dev/sd[x] mbr
+
For more information on Syslinux see the [[Syslinux|Arch Wiki article]].
syslinux -s /dev/sd[x]1
 
  
===After booting from the USB stick:===
+
===== Final steps =====
  
Start the installation by logging in as root and invoke the command "/arch/setup".
+
Finally, create a {{ic|*.bat}} file where {{ic|syslinux.exe}} is located and run it ("Run as administrator" if you are on Vista or Windows 7):
  
The installer should mount the source media automatically. If it fails you can manually mount the source media on the stick to the /src directory with the following command:
+
{{hc|C:\Documents and Settings\username\Desktop\install.bat|
 +
@echo off
 +
syslinux.exe -m -a -d /Boot/Settings X:
 +
}}
  
mount /dev/sd[x] /src
+
== Troubleshooting ==
  
===Troubleshooting:===
+
* If you get the "device did not show up after 30 seconds" error due to the {{ic|/dev/disk/by-label/ARCH_''YYYYMM''}} not mounting, try renaming your USB media to {{ic|ARCH_''YYYYMM''}} (e.g. {{ic|ARCH_201501}}).
 +
* If you get errors, try using another USB device. There are case scenarios in which it solved all issues.
  
If you happen to run into "Cluster sizes larger than 16K not supported" error when running syslinux - don't panic, that just means you need to install more recent version of syslinux.
+
== See also ==
  
<sup>(1)</sup> Using lilo is not really needed because syslinux does the "floppy" loading stuff. But if you get some error like "Can't load operating system" you have to perform the lilo command.
+
* [https://wiki.gentoo.org/wiki/LiveUSB/HOWTO Gentoo wiki - LiveUSB/HOWTO]
 +
* [https://fedoraproject.org/wiki/How_to_create_and_use_Live_USB Fedora wiki - How to create and use Live USB]
 +
* [https://en.opensuse.org/SDB:Live_USB_stick openSUSE wiki - SDB:Live USB stick]

Latest revision as of 15:24, 31 October 2019

This page discusses various multi-platform methods on how to create an Arch Linux Installer USB drive (also referred to as "flash drive", "USB stick", "USB key", etc) for booting in BIOS and UEFI systems. The result will be a LiveUSB (LiveCD-like) system that can be used for installing Arch Linux, system maintenance or for recovery purposes, and that, because of the nature of SquashFS, will discard all changes once the computer shuts down.

If you would like to run a full install of Arch Linux from a USB drive (i.e. with persistent settings), see Installing Arch Linux on a USB key. If you would like to use your bootable Arch Linux USB stick as a rescue USB, see Change root.

BIOS and UEFI bootable USB

Using automatic tools

In GNU/Linux

Using dd
Note: This method is recommended due to its simplicity. If it does not work, switch to the alternative method #Using manual formatting below.
Warning: This will irrevocably destroy all data on /dev/sdx. To restore the USB drive as an empty, usable storage device after using the Arch ISO image, the ISO 9660 filesystem signature needs to be removed by running wipefs --all /dev/sdx as root, before repartitioning and reformating the USB drive.
Tip: Find out the name of your USB drive with lsblk. Make sure that it is not mounted.

Run the following command, replacing /dev/sdx with your drive, e.g. /dev/sdb. (Do not append a partition number, so do not use something like /dev/sdb1)

# dd bs=4M if=path/to/archlinux.iso of=/dev/sdx status=progress oflag=sync

See dd(1) for more information about dd. See dd(1) for more information about oflag=sync.

Tip: If the UEFI version of the USB's Arch ISO hangs or is unable to load, try repeating the dd media creation process on the same USB drive one or more times.
Using etcher

Etcher is a OS image flasher built with node.js and Electron, capable of flashing an SDCard or USB drive. It protects you from accidentally writing to your hard-drives and ensures every byte of data was written correctly. There are 6 related packages in the AUR.

Using Kindd

Kindd is a Qt based graphical frontend for dd. It is available as kinddAUR.

In Windows

Using Rufus

Rufus is a multi-purpose USB ISO writer. It provides a graphical user interface and does not care if the drive is properly formatted or not.

Simply select the Arch Linux ISO, the USB drive you want to create the bootable Arch Linux onto and click START.

Note: If the USB drive does not boot properly using the default ISO Image mode, DD Image mode should be used instead.
  • For Rufus version ≥ 3.0 select GPT from the Partition scheme drop-down menu. After clicking START you will get the mode selection dialog, select DD Image mode.
  • For Rufus version < 3.0 select DD Image mode from the drop-down menu on the bottom.
Tip: To add an additional partition for persistent storage use the slider to choose the persistent partition's size. When using the persistent partition feature, make sure to select MBR in the Partition scheme drop-down menu and BIOS or UEFI in Target System, otherwise the drive will not be usable for both BIOS and UEFI booting.
Using USBwriter

This method does not require any workaround and is as straightforward as dd under Linux. Just download the Arch Linux ISO, and with local administrator rights use the USBwriter utility to write to your USB flash memory.

Using win32diskimager

win32diskimager is another graphical USB iso writing tool for Windows. Simply select your iso image and the target USB drive letter (you may have to format it first to assign it a drive letter), and click Write.

Using Cygwin

Make sure your Cygwin installation contains the dd package.

Tip: If you do not want to install Cygwin, you can download dd for Windows from here. See the next section for more information.

Place your image file in your home directory:

C:\cygwin\home\John\

Run cygwin as administrator (required for cygwin to access hardware). To write to your USB drive use the following command:

dd if=image.iso of=\\.\x: bs=4M

where image.iso is the path to the iso image file within the cygwin directory and \\.\x: is your USB flash drive where x is the windows designated letter, e.g. \\.\d:.

On Cygwin 6.0, find out the correct partition with:

cat /proc/partitions

and write the ISO image with the information from the output. Example:

Warning: This will irrevocably delete all files on your USB flash drive, so make sure you do not have any important files on the flash drive before doing this.
dd if=image.iso of=/dev/sdb bs=4M
dd for Windows

A GPL licensed dd version for Windows is available at http://www.chrysocome.net/dd. The advantage of this over Cygwin is a smaller download. Use it as shown in instructions for Cygwin above.

To begin, download the latest version of dd for Windows. Once downloaded, extract the archive's contents into Downloads or elsewhere.

Now, launch your command prompt as an administrator. Next, change directory (cd) into the Downloads directory.

If your Arch Linux ISO is elsewhere you may need to state the full path, for convenience you may wish to put the Arch Linux ISO into the same folder as the dd executable. The basic format of the command will look like this.

# dd if=archlinux-version-x86_64.iso od=\\.\x: bs=4M
Note: The Windows drive letters are linked to a partition. To allow selecting the entire disk, dd for Windows provides the od parameter, which is used in the commands above. Note however that this parameter is specific to dd for Windows and cannot be found in other implementations of dd.
Warning: Because the od is used, all partitions on the selected disk will be destroyed. Be absolutely sure that you are directing dd to the correct drive before executing.

Simply replace the various null spots (indicated by an "x") with the correct date and correct drive letter. Here is a complete example.

# dd if=ISOs\archlinux-version-x86_64.iso od=\\.\d: bs=4M

Tango-inaccurate.pngThe factual accuracy of this article or section is disputed.Tango-inaccurate.png

Reason: The following note may be invalid, the upstream documentation does not mention anything related to PhysicalDrive. (Discuss in Talk:USB flash installation media#dd for windows)
Note: Alternatively, replace the drive letter with \\.\PhysicalDriveX, where X is the physical drive number (starts from 0). Example:
# dd if=ISOs\archlinux-version-x86_64.iso of=\\.\PhysicalDrive1 bs=4M

You can find out the physical drive number by typing wmic diskdrive list brief at the command prompt or with dd --list

Any Explorer window must be closed or dd will report an error.

In macOS

First, you need to identify the USB device. Open /Applications/Utilities/Terminal and list all storage devices with the command:

$ diskutil list

Your USB device will appear as something like /dev/disk2 (external, physical). Verify that this is the device you want to erase by checking its name and size and then use its identifier for the commands below instead of /dev/diskX.

A USB device is normally auto-mounted in macOS, and you have to unmount (not eject) it before block-writing to it with dd. In Terminal, do:

$ diskutil unmountDisk /dev/diskX

Now copy the ISO image file to the device. The dd command is similar to its Linux counterpart, but notice the 'r' before 'disk' for raw mode which makes the transfer much faster:

Tango-inaccurate.pngThe factual accuracy of this article or section is disputed.Tango-inaccurate.png

Reason: It does not seem clear whether there should be bs=1M or bs=1m. [1][2] (Discuss in Talk:USB flash installation media#Repeated editions, back and forth)
# dd if=path/to/arch.iso of=/dev/rdiskX bs=1m

This command will run silently. To view progress, send SIGINFO by pressing Ctrl+t. Note diskX here should not include the s1 suffix, or else the USB device will only be bootable in UEFI mode and not legacy. After completion, macOS may complain that "The disk you inserted was not readable by this computer". Select 'Ignore'. The USB device will be bootable.

In Android

EtchDroid

EtchDroid is a OS image flasher for Android. It works without root permissions on Android 5 to Android 8. According to bug reports it doesn't always work on Android 9 and Android 4.4.

To create an Arch Linux installer, download the ISO image file on your Android device. Plug the USB drive to your device, using a USB-OTG adapter if needed. Open EtchDroid, select "Flash raw image", select your Arch ISO, then select your USB drive. Grant the USB API permission and confirm.

Keep your phone on a table while it's writing the image: a lot of USB-OTG adapters are a bit wobbly and you might unplug it by mistake.

Using manual formatting

In GNU/Linux

This method is more complicated than writing the image directly with dd, but it does keep the flash drive usable for data storage (that is, the ISO is installed in a specific partition within the already partitioned device without altering other partitions).

Note: Here, we will denote the targeted partition as /dev/sdXn. In any of the following commands, adjust X and n according to your system.
  • If not done yet, create a partition table on /dev/sdX.
  • If not done yet, create a partition on the device. The partition /dev/sdXn must be formatted to FAT32.
  • Mount the ISO image, mount the FAT32 filesystem located in the USB flash device, and copy the contents of the ISO image to it. Then unmount the ISO image, but keep the FAT32 partition mounted (this may be used in subsequent steps). For example:
# mkdir -p /mnt/{iso,usb}
# mount -o loop archlinux-version-x86_64.iso /mnt/iso
# mount /dev/sdXn /mnt/usb
# cp -a /mnt/iso/* /mnt/usb
# sync
# umount /mnt/iso

To boot either a label or an UUID to select the partition to boot from is required. By default the label ARCH_YYYYMM (with the appropriate release year and month) is used. Thus, the file system’s label has to be set accordingly, for example using gparted. Alternatively, you can change this behaviour by altering the lines ending by archisolabel=ARCH_YYYYMM in the file /mnt/usb/arch/boot/syslinux/archiso_sys.cfg (for BIOS boot), and in /mnt/usb/loader/entries/archiso-x86_64.conf (for UEFI boot). To use an UUID instead, replace those portions of lines with archisodevice=/dev/disk/by-uuid/YOUR-UUID. The UUID can be retrieved with blkid -o value -s UUID /dev/sdXn.

Warning: Mismatching labels or wrong UUID prevents booting from the created medium.

Syslinux files for BIOS systems are already copied to /mnt/usb/arch/boot/syslinux. Install the syslinux package and follow Syslinux#Manual install instructions to make the partition bootable.

In Windows

Note:
  • For manual formatting, do not use any Bootable USB Creator utility for creating the UEFI bootable USB. For manual formatting, do not use dd for Windows to dd the ISO to the USB drive either.
  • In the below commands, X: is assumed to be the USB flash drive in Windows.
  • Windows uses backward slash \ as path-separator, so the same is used in the below commands.
  • All commands should be run in Windows command prompt as administrator.
  • > denotes the Windows command prompt.
  • Partition and format the USB drive using Rufus USB partitioner. Select partition scheme option as MBR for BIOS and UEFI and File system as FAT32. Uncheck "Create a bootable disk using ISO image" and "Create extended label and icon files" options.
  • Change the Volume Label of the USB flash drive X: to match the LABEL mentioned in the archisolabel= part in <ISO>\loader\entries\archiso-x86_64.conf. This step is required for Official ISO (Archiso). This step can be also performed using Rufus, during the prior "partition and format" step.
  • Extract the ISO (similar to extracting ZIP archive) to the USB flash drive using 7-Zip.
  • Download official Syslinux 6.xx binaries (zip file) from https://www.kernel.org/pub/linux/utils/boot/syslinux/ and extract it. The version of Syslinux should be the same version used in the ISO image.
  • Run the following command (in Windows cmd prompt, as admin):
> cd bios\
> for /r %Y in (*.c32) do copy "%Y" "X:\arch\boot\syslinux\" /y
> copy mbr\*.bin X:\arch\boot\syslinux\ /y
  • Install Syslinux to the USB by running (use win64\syslinux64.exe for x64 Windows):
> cd bios\
> win32\syslinux.exe -d /arch/boot/syslinux -i -a -m X:
Note:
  • The above step installs Syslinux's ldlinux.sys to the VBR of the USB partition, sets the partition as "active/boot" in the MBR partition table and writes the MBR boot code to the 1st 440-byte boot code region of the USB.
  • The -d switch expects a path with forward slash path-separator like in *unix systems.

Other methods for BIOS systems

In GNU/Linux

Using a multiboot USB drive

This allows booting multiple ISOs from a single USB device, including the archiso. Updating an existing USB drive to a more recent ISO is simpler than for most other methods. See Multiboot USB drive.

Using GNOME Disk Utility

Linux distributions running GNOME can easily make a live CD through nautilus and gnome-disk-utility. Simply right-click on the .iso file, and select Open With Disk Image Writer. When GNOME Disk Utility opens, specify the flash drive from the Destination drop-down menu and click Start Restoring.

Making a USB-ZIP drive

For some old BIOS systems, only booting from USB-ZIP drives is supported. This method allows you to still boot from a USB-HDD drive.

Warning: This will destroy all information on your USB flash drive!
  • Download syslinux and mtools from the official repositories.
  • Find your usb drive with lsblk.
  • Type mkdiskimage -4 /dev/sdx 0 64 32 (replace x with the letter of your drive). This will take a while.

From here continue with the manual formatting method. The partition will be /dev/sdx4 due to the way ZIP drives work.

Note: Do not format the drive as FAT32; keep it as FAT16.

Using UNetbootin

UNetbootin can be used on any Linux distribution or Windows to copy your iso to a USB device. However, Unetbootin overwrites syslinux.cfg, so it creates a USB device that does not boot properly. For this reason, Unetbootin is not recommended -- please use dd or one of the other methods discussed in this topic.

Warning: UNetbootin writes over the default syslinux.cfg; this must be restored before the USB device will boot properly.

Edit syslinux.cfg:

sysconfig.cfg
default menu.c32
prompt 0
menu title Archlinux Installer
timeout 100

label unetbootindefault
menu label Archlinux_x86_64
kernel /arch/boot/x86_64/vmlinuz
append initrd=/arch/boot/x86_64/archiso.img archisodevice=/dev/sdx1 ../../

In /dev/sdx1 you must replace x with the first free letter after the last letter in use on the system where you are installing Arch Linux (e.g. if you have two hard drives, use c.). You can make this change during the first phase of boot by pressing Tab when the menu is shown.

In Windows

The Flashnul way

flashnul is an utility to verify the functionality and maintenance of Flash-Memory (USB-Flash, IDE-Flash, SecureDigital, MMC, MemoryStick, SmartMedia, XD, CompactFlash etc).

From a command prompt, invoke flashnul with -p, and determine which device index is your USB drive, e.g.:

C:\>flashnul -p
Avaible physical drives:
Avaible logical disks:
C:\
D:\
E:\

When you have determined which device is the correct one, you can write the image to your drive, by invoking flashnul with the device index, -L, and the path to your image, e.g:

C:\>flashnul E: -L path\to\arch.iso

As long as you are really sure you want to write the data, type yes, then wait a bit for it to write. If you get an access denied error, close any Explorer windows you have open.

If under Vista or Win7, you should open the console as administrator, or else flashnul will fail to open the stick as a block device and will only be able to write via the drive handle windows provides

Note: Confirmed that you need to use drive letter as opposed to number. flashnul 1rc1, Windows 7 x64.

Loading the installation media from RAM

Merge-arrows-2.pngThis article or section is a candidate for merging with Multiboot USB drive#Using Syslinux and memdisk.Merge-arrows-2.png

Notes: This is the same method, only Syslinux is installed from Windows. Considering that multiboot USB drive can be used to boot an installation media and it is already linked from the Related articles box at the top, maybe this section should be merged there? (Discuss in Talk:USB flash installation media#)

This method uses Syslinux and a Ramdisk (MEMDISK) to load the entire Arch Linux ISO image into RAM. Since this will be running entirely from system memory, you will need to make sure the system you will be installing this on has an adequate amount. A minimum amount of RAM between 500 MB and 1 GB should suffice for a MEMDISK based, Arch Linux install.

For more information on Arch Linux system requirements as well as those for MEMDISK see the Installation guide and here. For reference, here is the preceding forum thread.

Tip: Once the installer has completed loading you can simply remove the USB stick and even use it on a different machine to start the process all over again. Utilizing MEMDISK also allows booting and installing Arch Linux to and from the same USB flash drive.
Preparing the USB flash drive

Begin by formatting the USB flash drive as FAT32. Then create the following folders on the newly formatted drive.

  • Boot
    • Boot/ISOs
    • Boot/Settings
Copy the needed files to the USB flash drive

Next copy the ISO that you would like to boot to the Boot/ISOs folder. After that, extract from the following files from the latest release of syslinux from here and copy them into the following folders.

  • ./win32/syslinux.exe to the Desktop or Downloads folder on your system.
  • ./memdisk/memdisk to the Settings folder on your USB flash drive.
Create the configuration file

After copying the needed files, navigate to the USB flash drive, /boot/Settings and create a syslinux.cfg file.

Warning: On the INITRD line, be sure to use the name of the ISO file that you copied to your ISOs folder.
/Boot/Settings/syslinux.cfg
DEFAULT arch_iso

LABEL arch_iso
        MENU LABEL Arch Setup
        LINUX memdisk
        INITRD /Boot/ISOs/archlinux-version-x86_64.iso
        APPEND iso

For more information on Syslinux see the Arch Wiki article.

Final steps

Finally, create a *.bat file where syslinux.exe is located and run it ("Run as administrator" if you are on Vista or Windows 7):

C:\Documents and Settings\username\Desktop\install.bat
@echo off
syslinux.exe -m -a -d /Boot/Settings X:

Troubleshooting

  • If you get the "device did not show up after 30 seconds" error due to the /dev/disk/by-label/ARCH_YYYYMM not mounting, try renaming your USB media to ARCH_YYYYMM (e.g. ARCH_201501).
  • If you get errors, try using another USB device. There are case scenarios in which it solved all issues.

See also