Difference between revisions of "UWMWiFi"

From ArchWiki
Jump to: navigation, search
(Manual Setup)
(Manual Setup)
Line 44: Line 44:
  
 
</nowiki>}}
 
</nowiki>}}
 +
 +
Get card name
 +
 +
# ip link
  
 
Assuming your card is ''wlan0''
 
Assuming your card is ''wlan0''

Revision as of 20:18, 27 September 2013

UWMWiFi is the wireless network used by the University of Wisconsin-Milwaukee.

Netctl Setup

Still a work in progress, but this seems to function:

/etc/netctl/UWMWiFi
Description='UWM WiFi Network'
Interface=wlp3s0
Connection=wireless
Security=wpa-configsection
IP=dhcp
WPAConfigSection=(
    'ssid="UWMWiFi"'
    'key_mgmt=WPA-EAP'
    'eap=PEAP'
    'identity="USER@uwm.edu"'
    'password="PASSWORD"'
    'priority=1'
)

Then to connect:

# sudo netctl stop-all
# sudo netctl enable UWMWiFi
# sudo netctl start UWMWiFi

Manual Setup

If netctl does not work properly, try connecting manually using the iw tool and wpa_supplicant as directed in Wireless Setup:

/etc/wpa_supplicant/uwm.conf

network={
 ssid="UWMWiFi"
 key_mgmt=WPA-EAP
 eap=PEAP
 identity="user@uwm.edu"
 password="password"

}

ctrl_interface=DIR=/run/wpa_supplicant

Get card name

# ip link

Assuming your card is wlan0

# sudo ip link set wlan0 up
# sudo wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant/uwm.conf
# sudo dhcpcd wlan0

After resuming from sleep or similar

# sudo dhcpcd wlan0 -k
# sudo dhcpcd wlan0

So far, this method seems more reliable.

About Identity

On some parts of campus the identity field requires "@uwm.edu" and on some parts it requires only the username. For example, the in the Union connecting will fail if you include @uwm.edu, but in the EMS it will fail without it.

This will be tested and validated in the future.

See Also

https://wiki.archlinux.org/index.php/Netctl

https://wiki.archlinux.org/index.php/Wireless_Setup

https://wiki.archlinux.org/index.php/WPA_Supplicant

http://www4.uwm.edu/technology/authenticated/wifi/uwm/