- 1 bns-kharselim
- 2 X200 Libreboot
Migrating from Debian Testing Dec 2014.
- Backing up rootfs to bns-readynas
- Script in archtools
- Backing up home to 16G flash drive
- rsync -avz . /media/berocs/DTM30/
- Scratch the above, flash drive is 16G, need 33G. rsync-ing to nfs:/bkup.
Fixing the Thinklight
Ever since I bought this laptop, the Thinklight hasn't worked, and I just assumed it was a casualty of having libreboot on the system. Today, however, an irc member on #libreboot pointed me to a German forum post which discussed a hardware issue and solution with X200 Thinklights.
I set out to make the same changes to my X200, and found that it worked! My Thinklight now operates nominally, with two tiny wires run behind the ribbon cable and soldered to the connector and LED.
Resurfacing the keyboard
--> This process isn't permanent. For me, the new surface lasted about two months before wearing away.
This laptop isn't exactly new, and one of the most obvious signs of wear has been the "slick spots" where the texturing on individual keys has worn down. Once again, an irc user came to my aid, and informed me of this German wiki page, where the issue is tackled.
I.. can't read German, so the page was loosely translated mechanically, and I tried to put the pieces together. Here's what I got:
- Clean the keyboard really well (dish soap, microfiber cloth, isopropyl)
- Get some clear coat matte finish wheel spraypaint (duplicolor brand)
- Paint the keyboard?
I wound up buying "Dupli-Color wheel matte clearcoat" which is product "HWP106"
I only washed the keyboard with a toothbrush and hand soap, drying with a microfiber towel. I didn't clean the keyboard as well as I should have, it would get perfectly clean, and then immediately some dust would settle on it. Oh well, the result still turned out OK.
I added layers until the glossy spots were just barely visible, with 10 minutes between layers.
Now to find out how well it holds up!
Firefox doesn't play nice with GTK Themes
What's happening is that lxappearance sets the gtk2 theme, and firefox uses the gtk3 theme. You have to look at both.
GTK2 is ~/.gtkrc-2.0
GTK3 is ~/.config/gtk-3.0/
Using a Brother DS-620
Forum post read it all the way through.
Libreoffice keeps segfaulting
Libreoffice would crash almost as soon as it lost focus as the main window in i3.
to fix this I had to edit the version of gtk being used in some configuration files.
qtcreator crash on help
Delete the helpcollection folder and .qhc file.
r600 driver on steam
[berocs@bns-kharselim ~]$ env LIBGL_DEBUG=verbose steam Running Steam on arch rolling 64-bit STEAM_RUNTIME is enabled automatically Installing breakpad exception handler for appid(steam)/version(0) libGL: OpenDriver: trying /usr/lib32/xorg/modules/dri/tls/r600_dri.so libGL: OpenDriver: trying /usr/lib32/xorg/modules/dri/r600_dri.so libGL: dlopen /usr/lib32/xorg/modules/dri/r600_dri.so failed (/home/berocs/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by /usr/lib32/xorg/modules/dri/r600_dri.so)) libGL error: unable to load driver: r600_dri.so libGL error: driver pointer missing libGL error: failed to load driver: r600 libGL: OpenDriver: trying /usr/lib32/xorg/modules/dri/tls/swrast_dri.so libGL: OpenDriver: trying /usr/lib32/xorg/modules/dri/swrast_dri.so libGL: dlopen /usr/lib32/xorg/modules/dri/swrast_dri.so failed (/home/berocs/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by /usr/lib32/xorg/modules/dri/swrast_dri.so)) libGL error: unable to load driver: swrast_dri.so libGL error: failed to load driver: swrast ^C
mv /home/berocs/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libstdc++.so.6 /home/berocs/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libstdc++.so.6.bkup sudo ln -s /usr/lib32/libstdc++.so.6 /home/berocs/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libstdc++.so.6 sudo pacmatic -S ttf-liberation
ttf-liberation is to fix garbled text on the login screen.
(1/1) installing xf86-video-intel [########################################################] 100% >>> This driver now uses DRI3 as the default Direct Rendering Infrastructure. You can try falling back to DRI2 if you run into trouble. To do so, save a file with the following content as /etc/X11/xorg.conf.d/20-intel.conf : Section "Device" Identifier "Intel Graphics" Driver "intel" Option "DRI" "2" # DRI3 is now default #Option "AccelMethod" "sna" # default #Option "AccelMethod" "uxa" # fallback EndSection
# cat pm_trace_dev_match
$ dmesg -s 1000000 | grep 'hash matches'
[ 0.600016] hash matches drivers/base/power/main.c:1070 [ 0.600106] acpi device:0e: hash matches [ 0.600124] platform: hash matches
For the "new" bns-kharselim X200:
Flash chip size:
# dmidecode | grep ROM\ Size ROM Size: 8192 kB
# dmesg | grep CPU [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff8801bfc00000 s95576 r8192 d31400 u1048576 [ 0.000000] WARNING: CPU: 0 PID: 0 at drivers/iommu/dmar.c:829 warn_invalid_dmar+0x7c/0x90() [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.1.4-gnu-1 #1 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2. [ 0.016290] CPU: Physical Processor ID: 0 [ 0.016292] CPU: Processor Core ID: 0 [ 0.016295] mce: CPU supports 6 MCE banks [ 0.016305] CPU0: Thermal monitoring enabled (TM2) [ 0.063333] smpboot: CPU0: Intel(R) Core(TM)2 CPU P8600 @ 2.40GHz (fam: 06, model: 17, stepping: 0a) [ 0.083434] .... node #0, CPUs: #1 [ 0.096661] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.096679] x86: Booted up 1 node, 2 CPUs [ 0.275898] ledtrig-cpu: registered to indicate activity on CPUs [15424.575185] Disabling non-boot CPUs ... [15424.576466] kvm: disabling virtualization on CPU1 [15424.576479] smpboot: CPU 1 is now offline [15424.576816] Enabling non-boot CPUs ... [15424.576472] kvm: enabling virtualization on CPU1 [15424.588983] CPU1 is up
Resulting CPUID: 0x06170A
It might be possible to put a better (quad core) cpu on the board according to someone on IRC.. An example being a X5460.
It also might be possible to expand the amount of storage with http://www.thinkwiki.org/wiki/Intel%C2%AE_Turbo_Memory_hard_drive_cache
Setting firmware options
Use nvramtool to set options. -h for usage.
This doesn't work on Libreboot 4.0, should be fixed in future release according to chatter on #libreboot.
$ sudo nvramtool -a [sudo] password for berocs: boot_option = Fallback last_boot = Fallback baud_rate = 115200 debug_level = Spew volume = 0x3 sata_mode = AHCI power_on_after_fail = Disable first_battery = Primary bluetooth = Enable wwan = Enable wlan = Enable trackpoint = Enable fn_ctrl_swap = Disable sticky_fn = Disable boot_devices = boot_default = 0x0 power_management_beeps = Enable low_battery_beep = Enable uwb = Disable gfx_uma_size = 32M $ sudo nvramtool -w fn_ctrl_swap=Enable
eth0 not detected on boot
Improperly configured laptop-mode tools.
options ath9k ps_enable=1
Mouse glitching or sleeping
Again, bad laptop-mode settings