Difference between revisions of "User:Gemstone"

From ArchWiki
Jump to navigation Jump to search
(explained why I joined the wiki)
 
(wifi-menu troubleshooting -- wireless instructions)
Line 1: Line 1:
 
I joined the Arch Wiki because I think that setting up wifi can be explained better than it has been.
 
I joined the Arch Wiki because I think that setting up wifi can be explained better than it has been.
 +
 +
I got the following message after rebooting during the installation:
 +
:Scanning for networks... You need to install 'wpa_supplicant'
 +
:failed
 +
:No networks found
 +
 +
In order to remedy this, you have to install 'wpa_supplicant' before the reboot. This can be done during the 'pacstrap /mnt' step.
 +
 +
In my case, I had set up a dhcp service in the following way:
 +
: [root@archiso /]# systemctl enable dhcpcd@enp0s3.service
 +
 +
After the reboot, wifi-menu would not work. Here's how I fixed it:
 +
 +
: # ip link set wlp3s0 down
 +
: # wifi-menu
 +
: # wifi-menu -o
 +
: # netctl start wlp3s0_TP-Link
 +
: # netctl enable wlp3s0_TP-Link
 +
 +
'netctl' expects the wireless device to be in a down state. 'wifi-menu' wraps 'netctl'. 'wifi-menu' will not work unless the network device is in a down state.
 +
 +
This information took me two years to articulate.
 +
 +
The wiki needs to have a better wireless configuration section.

Revision as of 02:30, 8 June 2019

I joined the Arch Wiki because I think that setting up wifi can be explained better than it has been.

I got the following message after rebooting during the installation:

Scanning for networks... You need to install 'wpa_supplicant'
failed
No networks found

In order to remedy this, you have to install 'wpa_supplicant' before the reboot. This can be done during the 'pacstrap /mnt' step.

In my case, I had set up a dhcp service in the following way:

[root@archiso /]# systemctl enable dhcpcd@enp0s3.service

After the reboot, wifi-menu would not work. Here's how I fixed it:

# ip link set wlp3s0 down
# wifi-menu
# wifi-menu -o
# netctl start wlp3s0_TP-Link
# netctl enable wlp3s0_TP-Link

'netctl' expects the wireless device to be in a down state. 'wifi-menu' wraps 'netctl'. 'wifi-menu' will not work unless the network device is in a down state.

This information took me two years to articulate.

The wiki needs to have a better wireless configuration section.