Users and groups
Users and groups are used on GNU/Linux for access control — that is, to control access to the system's files, directories, and peripherals. Linux offers relatively simple/coarse access control mechanisms by default. For more advanced options, see ACL and LDAP Authentication.
A user is anyone who uses a computer. In this case, we are describing the names which represent those users. It may be Mary or Bill, and they may use the names Dragonlady or Pirate in place of their real name. All that matters is that the computer has a name for each account it creates, and it is this name by which a person gains access to use the computer. Some system services also run using restricted or privileged user accounts.
Managing users is done for the purpose of security by limiting access in certain specific ways. The superuser (root) has complete access to the operating system and its configuration; it is intended for administrative use only. Unprivileged users can use the su and sudo programs for controlled privilege escalation.
Any individual may have more than one account, as long as they use a different name for each account they create. Further, there are some reserved names which may not be used such as "root".
Users may be grouped together into a "group", and users may be added to an existing group to utilize the privileged access it grants.
Permissions and ownership
- The UNIX operating system crystallizes a couple of unifying ideas and concepts that shaped its design, user interface, culture and evolution. One of the most important of these is probably the mantra: "everything is a file," widely regarded as one of the defining points of UNIX.
- This key design principle consists of providing a unified paradigm for accessing a wide range of input/output resources: documents, directories, hard-drives, CD-ROMs, modems, keyboards, printers, monitors, terminals and even some inter-process and network communications. The trick is to provide a common abstraction for all of these resources, each of which the UNIX fathers called a "file." Since every "file" is exposed through the same API, you can use the same set of basic commands to read/write to a disk, keyboard, document or network device.
- A fundamental and very powerful, consistent abstraction provided in UNIX and compatible operating systems is the file abstraction. Many OS services and device interfaces are implemented to provide a file or file system metaphor to applications. This enables new uses for, and greatly increases the power of, existing applications — simple tools designed with specific uses in mind can, with UNIX file abstractions, be used in novel ways. A simple tool, such as cat, designed to read one or more files and output the contents to standard output, can be used to read from I/O devices through special device files, typically found under the
/devdirectory. On many systems, audio recording and playback can be done simply with the commands, "
cat /dev/audio > myfile" and "
cat myfile > /dev/audio," respectively.
Every file on a GNU/Linux system is owned by a user and a group. In addition, there are three types of access permissions: read, write, and execute. Different access permissions can be applied to a file's owning user, owning group, and others (those without ownership). One can determine a file's owners and permissions by viewing the long listing format of the ls command:
$ ls -l /boot/
total 13740 drwxr-xr-x 2 root root 4096 Jan 12 00:33 grub -rw-r--r-- 1 root root 8570335 Jan 12 00:33 initramfs-linux-fallback.img -rw-r--r-- 1 root root 1821573 Jan 12 00:31 initramfs-linux.img -rw-r--r-- 1 root root 1457315 Jan 8 08:19 System.map26 -rw-r--r-- 1 root root 2209920 Jan 8 08:19 vmlinuz-linux
The first column displays the file's permissions (for example, the file
initramfs-linux.img has permissions
-rw-r--r--). The third and fourth columns display the file's owning user and group, respectively. In this example, all files are owned by the root user and the root group.
$ ls -l /media/
total 16 drwxrwx--- 1 root vboxsf 16384 Jan 29 11:02 sf_Shared
In this example, the
sf_Shared directory is owned by the root user and the vboxsf group. It is also possible to determine a file's owners and permissions using the stat command:
$ stat -c %U /media/sf_Shared/
$ stat -c %G /media/sf_Shared/
$ stat -c %A /media/sf_Shared/
Access permissions are displayed in three groups of characters, representing the permissions of the owning user, owning group, and others, respectively. For example, the characters
-rw-r--r-- indicate that the file's owner has read and write permission, but not execute (
rw-), whilst users belonging to the owning group and other users have only read permission (
r--). Meanwhile, the characters
drwxrwx--- indicate that the file's owner and users belonging to the owning group all have read, write, and execute permissions (
rwx), whilst other users are denied access (
---). The first character represents the file's type.
List files owned by a user or group with the find utility:
# find / -group [group]
# find / -user [user]
A file's owning user and group can be changed with the chown (change owner) command. A file's access permissions can be changed with the chmod (change mode) command.
||Secure user account information|
||User account information|
||Contains the shadowed information for group accounts|
||Defines the groups to which users belong|
||List of who can run what by sudo|
To list users currently logged on the system, the who command can be used.
To add a new user, use the useradd command:
# useradd -m -g [initial_group] -G [additional_groups] -s [login_shell] [username]
-mcreates the user home directory as
/home/username. Within their home directory, a non-root user can write files, delete them, install programs, and so on.
-gdefines the group name or number of the user's initial login group. If specified, the group name must exist; if a group number is provided, it must refer to an already existing group. If not specified, the behaviour of useradd will depend on the
USERGROUPS_ENABvariable contained in
/etc/login.defs. The default behaviour (
USERGROUPS_ENAB yes) is to create a group with the same name as the username, with
-Gintroduces a list of supplementary groups which the user is also a member of. Each group is separated from the next by a comma, with no intervening spaces. The default is for the user to belong only to the initial group.
-sdefines the path and file name of the user's default login shell. After the boot process is complete, the default login shell is the one specified here. Ensure the chosen shell package is installed if choosing something other than Bash.
/etc/shells, unless the shell is intended to be non-functional (e.g.
/usr/bin/nologin). For programs that use PAM, this is checked by the
Example adding a user
On a typical desktop system, use the following command to add a new user named
archie, specify Bash as their login shell and add them to the
wheel group (see the entry in #User groups for details):
# useradd -m -G wheel -s /bin/bash archie
This command will also automatically create a group called
archie with the same GID as the UID of the user
archie and makes this the default group for
archie on login. Making each user have their own group (with group name same as user name and GID same as UID) is the preferred way to add users.
You could also make the default group something else, e.g.
# useradd -m -g users -G wheel -s /bin/bash archie
However, this is not recommended for multi-user systems. Typically, the method for facilitating shared write access for specific groups of users while keeping home directories private is setting user umask value to
002, meaning the default group (
users in the example above) will by default always have write access to any file you create. The user's home folder, which is owned by a group with group name same as user name, will be read-only for other system users, while shared files/folders can be made writeable by default for everyone in the operative group. The owning group can be automatically fixed to the group which owns the parent directory by setting the group sticky bit on this directory:
# chmod g+s our_shared_directory
Otherwise the file creator's default group (usually the same as the user name) is used.
Other examples of user management
To add a user to other groups use (
additional_groups is a comma-separated list):
# usermod -aG additional_groups username
Alternatively, gpasswd may be used. Though the username can only be added (or removed) from one group at a time.
# gpasswd --add username group
-aoption is omitted in the usermod command above, the user is removed from all groups not listed in
additional_groups(i.e. the user will be member only of those groups listed in
To enter user information for the GECOS field (e.g. the full user name), type:
# chfn username
(this way chfn runs in interactive mode).
To specify the user's password, type:
# passwd username
To mark a user's password as expired, requiring them to create a new password the first time they log in, type:
# chage -d 0 username
User accounts may be deleted with the userdel command.
# userdel -r username
-r option specifies that the user's home directory and mail spool should also be deleted.
Local user information is stored in the
/etc/passwd file. To list all user accounts on the system:
$ cat /etc/passwd
There is one line per account, and each is of the format:
accountis the user name
passwordis the user password
UIDis the numerical user ID
GIDis the numerical primary group ID for the user
GECOSis an optional field used for informational purposes; usually it contains the full user name
directoryis the user's
shellis the user command interpreter (defaults to
passwdfile is world-readable, so storing passwords (hashed or otherwise) in this file would be insecure. Instead, the
passwordfield will contain a placeholder character (
x) indicating that the hashed password is saved in the access-restricted file
/etc/group is the file that defines the groups on the system (
man group for details).
Display group membership with the
$ groups [user]
user is omitted, the current user's group names are displayed.
id command provides additional detail, such as the user's UID and associated GIDs:
$ id [user]
To list all groups on the system:
$ cat /etc/group
Create new groups with the
# groupadd [group]
Add users to a group with the
# gpasswd -a [user] [group]
Modify an existing group with
groupmod; e.g. to rename
old_group group to
new_group whilst preserving gid (all files previously owned by
old_group will be owned by
# groupmod -n [new_group] [old_group]
To delete existing groups:
# groupdel [group]
To remove users from a group:
# gpasswd -d [user] [group]
If the user is currently logged in, he/she must log out and in again for the change to have effect.
Workstation/desktop users often add their non-root user to some of following groups to allow access to peripherals and other hardware and facilitate system administration:
||Access to some game software.|
||Right to control wireless devices power state (used by).|
|users||Standard users group.|
||Serial and USB devices such as modems, handhelds, RS-232/serial ports.|
|wheel||Administration group, commonly used to give access to the sudo and su utilities (neither uses it by default, configurable in |
The following groups are used for system purposes and are not likely to be used by novice Arch users:
|dbus||used internally by|
||used by FTP servers like Proftpd|
|fuse||Used by fuse to allow user mounts.|
||Complete system administration and control (root, admin).|
||Provides access to the complete systemd logs. Otherwise, only user generated messages are displayed.|
||Eg. to acces |
These groups are used by certain non-essential software. Sometimes they are used just internally, in these cases you should not add your user into these groups. See the main page for the software for details.
|adbusers||devices nodes under
||Right to access Android Debugging Bridge.|
||Right to use cdemu drive emulation.|
||Used by Clam AntiVirus.|
|gdm||X server authorization directory (ServAuthDir)||GDM group.|
||Right to use updatedb command.|
|networkmanager||Requirement for your user to connect wirelessly with NetworkManager. This group is not included with Arch by default so it must be added manually.|
||Used by ThinkPad users for access to tools such as tpb.|
|vboxsf||virtual machines' shared folders||Used by VirtualBox.|
||Right to use VirtualBox software.|
|vmware||Right to use VMware software.|
|wireshark||Right to capture packets with Wireshark.|
Deprecated or unused groups
Following groups are currently of no use for anyone:
|log||Access to log files in |
|stb-admin||Unused! Right to access system-tools-backends|
|kvm||Adding a user to the |
These groups used to be needed before arch migrated to systemd. That is no longer the case, as long as the logind session is not broken (see General troubleshooting#Session permissions to check it). The groups can even cause some functionality to break. See Sysvinit#Migration_to_systemd for details.
||Direct access to sound hardware, for all sessions (requirement is imposed by both ALSA and OSS). Local sessions already have the ability to play sound and access mixer controls.|
|camera||Access to Digital Cameras.|
||Access to block devices not affected by other groups such as |
||Access to floppy drives.|
||Access to printer hardware; enables the user to manage print jobs.|
|network||Right to change network settings such as when using NetworkManager.|
||Access to optical devices such as CD and DVD drives.|
|power||Right to use Pm-utils (suspend, hibernate...) and power management controls.|
||Access to scanner hardware.|
|storage||Access to removable drives such as USB hard drives, flash/jump drives, MP3 players; enables the user to mount storage devices.|
|sys||Right to administer printers in CUPS.|
||Access to video capture devices, 2D/3D hardware acceleration, framebuffer (X can be used without belonging to this group). Local sessions already have the ability to use hardware acceleration and video capture.|