Difference between revisions of "VMware"

From ArchWiki
Jump to: navigation, search
(Made it neater in style and changed minor type)
Line 7: Line 7:
 
{{i18n_entry|Русский|Установка_VMware (Русский)}}
 
{{i18n_entry|Русский|Установка_VMware (Русский)}}
 
{{i18n_links_end}}
 
{{i18n_links_end}}
[http://www.vmware.com/ VMware] installs on [[Arch Linux]] pretty well, but its not totally straight forward.
+
[http://www.vmware.com/ VMware] installs on [[Arch Linux]] pretty well, but it's not totally straight forward.
  
 
==VMware Workstation Installation==
 
==VMware Workstation Installation==
Line 187: Line 187:
 
- why is /dev/vmmon chmod 0660, as opposed to the rest (0600)?<br>
 
- why is /dev/vmmon chmod 0660, as opposed to the rest (0600)?<br>
 
- i suppose /dev/vmmon should be "rm"-ed as well in the "stop" section for the script above? (that line is missing) - FIXED
 
- i suppose /dev/vmmon should be "rm"-ed as well in the "stop" section for the script above? (that line is missing) - FIXED
 
+
==Compile Modules Problem==
== VMware and kernel 2.6.32 compile modules problem ==
+
=== VMware and kernel 2.6.32 ===
  
 
To patch VMware modules we have to add '''#include "compat_sched.h"''' to some files.
 
To patch VMware modules we have to add '''#include "compat_sched.h"''' to some files.
Line 203: Line 203:
 
You can also use ready script http://communities.vmware.com/thread/239221
 
You can also use ready script http://communities.vmware.com/thread/239221
  
== VMware and kernel 2.6.31 compile modules problem ==
+
=== VMware and kernel 2.6.31===
  
 
Patch files are at http://communities.vmware.com/message/1305526#1305526
 
Patch files are at http://communities.vmware.com/message/1305526#1305526
Line 219: Line 219:
 
  # vmware-modconfig --console --install-all
 
  # vmware-modconfig --console --install-all
  
== VMware and kernel 2.6.30 compile modules problem ==
+
=== VMware and kernel 2.6.30 ===
 
In Kernel 2.6.30 the modules fail to compile out of the box again.
 
In Kernel 2.6.30 the modules fail to compile out of the box again.
 
I followed these instructions over [http://communities.vmware.com/thread/208963 here]
 
I followed these instructions over [http://communities.vmware.com/thread/208963 here]
Line 233: Line 233:
 
This will unpack, patch and repack the module sources. Afterwards one can manually trigger to build the modules or just start VMware, which will also build the modules when trying to start a vm.
 
This will unpack, patch and repack the module sources. Afterwards one can manually trigger to build the modules or just start VMware, which will also build the modules when trying to start a vm.
  
== VMware and kernel 2.6.29 compile modules problem ==
+
=== VMware and kernel 2.6.29 ===
 
In Kernel 2.6.29 some internal data-structs were changed. Download this [http://communities.vmware.com/servlet/JiveServlet/download/2835-188410-1149089-18058/vmware-workstation-6.5.1.126130-2.6.29_x86_64.patch patch] and apply it to the vmware modules sources as follows:
 
In Kernel 2.6.29 some internal data-structs were changed. Download this [http://communities.vmware.com/servlet/JiveServlet/download/2835-188410-1149089-18058/vmware-workstation-6.5.1.126130-2.6.29_x86_64.patch patch] and apply it to the vmware modules sources as follows:
  
Line 253: Line 253:
 
Afterwards, build the modules manually or just start vmware, as it will start building the modules for you automatically (using the patched sources). For further information read this [http://communities.vmware.com/thread/192355 thread].
 
Afterwards, build the modules manually or just start vmware, as it will start building the modules for you automatically (using the patched sources). For further information read this [http://communities.vmware.com/thread/192355 thread].
  
== VMware and kernel 2.6.28 compile modules problem ==
+
=== VMware and kernel 2.6.28===
 
A tested solution is to [http://www.insecure.ws/warehouse/vmware-update-2.6.27-5.5.7-2.tar.gz fetch] the [http://www.insecure.ws/2008/10/20/vmware-specific-specific-55x-and-kernel-2627 patched modules] and replace them.
 
A tested solution is to [http://www.insecure.ws/warehouse/vmware-update-2.6.27-5.5.7-2.tar.gz fetch] the [http://www.insecure.ws/2008/10/20/vmware-specific-specific-55x-and-kernel-2627 patched modules] and replace them.
 
To achieve this, you will need to extract the downloaded archive, and replace both vmmon.tar and vmnet.tar to /usr/lib/vmware/modules/source.  
 
To achieve this, you will need to extract the downloaded archive, and replace both vmmon.tar and vmnet.tar to /usr/lib/vmware/modules/source.  
 
After that, run /usr/bin/vmware-config.pl to rebuild the modules.
 
After that, run /usr/bin/vmware-config.pl to rebuild the modules.
  
== VMware and kernel 2.6.26 compile modules problem ==
+
=== VMware and kernel 2.6.26 ===
 
If after compiling the modules following the method for 2.6.25 you receive the "Version mismatch with vmmon module:" error when powering on a virtual machine you will need to take one additional step.
 
If after compiling the modules following the method for 2.6.25 you receive the "Version mismatch with vmmon module:" error when powering on a virtual machine you will need to take one additional step.
  
Line 276: Line 276:
 
Finally, run vmware-config.pl.
 
Finally, run vmware-config.pl.
  
== VMware and kernel 2.6.25 compile modules problem ==
+
=== VMware and kernel 2.6.25 ===
 
There are extra steps required for Vmware WKS 6.0.3 build 80004, should be the same for VMware Server
 
There are extra steps required for Vmware WKS 6.0.3 build 80004, should be the same for VMware Server
 
# Install and patch as described (use vmware-any-any-update-116.tgz)
 
# Install and patch as described (use vmware-any-any-update-116.tgz)
Line 283: Line 283:
 
# Run vmware-2.6.25.sh and then vmware-config.pl
 
# Run vmware-2.6.25.sh and then vmware-config.pl
  
== VMware and kernel 2.6.24 compile modules problem ==
+
=== VMware and kernel 2.6.24===
 
May not work properly yet. Apply the patch from  http://bio.artcradle.com/temp/vault/vmware-any-any-update-116.tgz (untar, run runme.pl script) Note: this is an '''ugly hack''', please don't put it into production systems. Some guest OS'es may have crashes and networking problems with this. '''Don't tell us that you haven't been warned'''
 
May not work properly yet. Apply the patch from  http://bio.artcradle.com/temp/vault/vmware-any-any-update-116.tgz (untar, run runme.pl script) Note: this is an '''ugly hack''', please don't put it into production systems. Some guest OS'es may have crashes and networking problems with this. '''Don't tell us that you haven't been warned'''
  
== VMware and kernel 2.6.22 compile modules problem ==
+
=== VMware and kernel 2.6.22 ===
 
May not work properly yet. Apply the patch from http://knihovny.cvut.cz/ftp/pub/vmware/vmware-any-any-update112.tar.gz , replace vmnet.tar with http://npw.net/~phbaer/vmnet.tar and reinstall. Note: this is an '''ugly hack''', please dont put it into production systems. Some guest OS'es may have crashes and networking problems with this. '''Dont tell us that you havent been warned'''
 
May not work properly yet. Apply the patch from http://knihovny.cvut.cz/ftp/pub/vmware/vmware-any-any-update112.tar.gz , replace vmnet.tar with http://npw.net/~phbaer/vmnet.tar and reinstall. Note: this is an '''ugly hack''', please dont put it into production systems. Some guest OS'es may have crashes and networking problems with this. '''Dont tell us that you havent been warned'''
  
== VMware and kernel 2.6.20 compile modules problem ==
+
=== VMware and kernel 2.6.20 ===
 
Below is a solution for compiling the vmware modules on kernel 2.6.20.
 
Below is a solution for compiling the vmware modules on kernel 2.6.20.
  
Line 309: Line 309:
 
Finally, run vmware-config.pl
 
Finally, run vmware-config.pl
  
== VMware and kernel 2.6.16 compile modules problem ==
+
=== VMware and kernel 2.6.16 ===
 
'''PROBLEM''': kernel 2.6.16-x - vmware or vmwareplayer complains that headers are incorect.<br>
 
'''PROBLEM''': kernel 2.6.16-x - vmware or vmwareplayer complains that headers are incorect.<br>
 
'''FIX''': You need [http://knihovny.cvut.cz/ftp/pub/vmware/vmware-any-any-update101.tar.gz vmware-any-any-update] patch [ftp://ftp.cvut.cz/vmware/vmware-any-any-update101.tar.gz  mirror here] [http://www.inarad.ro/soft/vmware/vmware-any-any-update101.tar.gz or here].<br> Just untar the archive and run ./runme.pl as root - and you're happy again!
 
'''FIX''': You need [http://knihovny.cvut.cz/ftp/pub/vmware/vmware-any-any-update101.tar.gz vmware-any-any-update] patch [ftp://ftp.cvut.cz/vmware/vmware-any-any-update101.tar.gz  mirror here] [http://www.inarad.ro/soft/vmware/vmware-any-any-update101.tar.gz or here].<br> Just untar the archive and run ./runme.pl as root - and you're happy again!

Revision as of 20:46, 6 February 2010

Template:I18n links start Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n entry Template:I18n links end VMware installs on Arch Linux pretty well, but it's not totally straight forward.

VMware Workstation Installation

The following is from the VMWare Workstation AUR user comments, by user whompus. It describes how to install VMWare Workstation 6.5.x on either architecture.

As a temp measure use this method to install 6.5. Note that it will not install with pacman, so the files installed will not be traceable/removable with pacman.

To install Workstation on a Linux host using a bundle

1. Download VMware-Workstation-6.5.xxxxxx.bundle. Replace xxxxx for whichever minor version & architecture.

2. In a terminal cd to the directory where you downloaded the file.

3. Become root to perform the initial installation steps:

# mkdir -p /etc/rc.d/vmware.d/rc{0,1,2,3,4,5,6}.d
# sh VMware-Workstation-6.5.xxxxxx.bundle --console --custom

4. Read & accept the EULA to continue.

5. Accept the default settings until it prompts for System service runlevels then set to:

/etc/rc.d/vmware.d/

If you get the error "/etc/rc.d/vmware.d is not an init directory", create the following in /etc/rc.d/vmware.d:

cd /etc/rc.d/vmware.d
mkdir rc0.d rc1.d rc2.d rc3.d rc4.d rc5.d rc6.d init.d

6. For System service scripts set to:

/etc/rc.d

7. (Optional) Enter the directory path to the Integrated Virtual Debugger for Eclipse if Eclipse is installed.

8. Mash enter to install. Note that if nothing happens at this point and you are returned to the prompt, try re-running the installation without the '--console' option.

9. Open Workstation (vmware in the console) to configure & use!


Troubleshooting

If the VMware installation hangs during the "Configuring VMWare Player" stage, see the following post on the VMware forums for an explanation and workaround: http://communities.vmware.com/message/1357476

After launching vmware, if you experience an errors stating, "modinfo: could not find module vmmon" you may need to rebuild vmware's binary modules. Use the following commands:

1. Make a backup (required before recompiling models):

# sudo mv /usr/lib/vmware/modules/binary /usr/lib/vmware/modules/binary.old

2. Recompile modules and load them into memory:

# sudo vmware-modconfig --console --install-all

3. For versions 6.53 and 7 of Vmware Workstation, at least:

  If you get an error like (/etc/rc.d/vmware.d/init.d/vmware: line 108: /sbin/lsmod: File or directory not found)     
  in the step 2 above, or when restarting vmware, check the file /etc/rc.d/vmware.d/init.d/vmware. Search for     
  /sbin/lsmod ocurrences, and replace it por /bin/lsmod.

VMware Server Installation

NOTE I would highly recommend using VMWare Server 2 on 2.6.27 as it actually builds. It also does not appear to require a patch.

You can use the AUR or manually install VMware Server downloaded from VMware.com. This guide shows you how to install the manually downloaded VMware server tarball, assuming you are running Voodoo or newer (Duke) with kernel version 2.6.20+ 32-bit.

Requirements:

  • Root access. Either 'sudo' or 'su'. For this guide, I will be using 'sudo'.
  • Xinetd is installed, up and running.
  • The X-libraries libxtst, libxt and libxrender installed
  • VMware server tarball; latest is 1.0.4 build 56528 as of this writing.
  • VMware server any-to-any" patch: mirror 1 and mirror 2. Note: For server 1.0.4 build 56528 you need patch vmware-any-any-update113.tar.bz2, which is on mirror 1 only.
  • UPDATE: With 2.6.24 you need this patch (vmware-any-any-update115a.tgz)
  • UPDATE: With 2.6.25 you need also this patch (vmware-any-any-update-117-very-ALPHA)
  • Compatible with VMware Workstation >= 6.0.2 Build 59824 on Linux 2.6.25
  • UPDATE: With 2.6.26 you need this patch (vmware-any-any-update117d.tar.gz), the VMware version 6.0.5 doesn't need the patch, the version for vmmon e.g. in 117d is even too old (168, need 169!)
  • UPDATE: With 2.6.26 and VMWare 6.5 _no_ patch is needed anymore (6.5.0 build-118166). The graphical installer works just fine and all the modules work out of the box. Follow the instructions below for the directory containing the init-scripts.
  • NOTE: With the kernel installed on 2009.02 Core, the compilation of modules vmnet and vmmon works perfectly. Compiling modules on the latest kernel (kernel-headers-2.6.29.1-1-x86_64 and kernel26-2.6.29.3-1-x86_64 as of May 13, 2009) will fail. See below for patching 2.6.29 kernel for VMWare.

Instructions:

  • Run sudo mkdir -p /etc/rc.d/vmware.d/rc{0,1,2,3,4,5,6}.d to create VMware runlevel directories.
  • Run sudo ln -s /bin/lsmod /sbin/ to create symlink for lsmod.
  • Extract VMware server tarball somewhere... i.e. /tmp/.
  • Run cd /tmp/vmware-server-distrib;sudo ./vmware-install.pl. I used /home/vmware/bin for installation.
  • When it asks where the directories for rc0.d thru rc6.d are, use /etc/rc.d/vmware.d.
  • When it asks where the init directory is, use /etc/rc.d.
  • *QUIT* when it asks you if you want to run VMware configuration for the first time.
  • Extract VMware server any-to-any patch somewhere... i.e. /tmp/.
  • Run cd /tmp/vmware-any-any-update*REV*;sudo ./runme.pl. This will patch VMware server modules to allow Linux kernel 2.6.20 compilation.
  • For Linux 2.6.25 additionally to the previous patch115a or 116 you need to manually patch with 117_Alpha.
  • For 2.6.25 extract 117 to the location tar xzf vmware-any-any-update-117-very-ALPHA.tgz -C /usr/lib/vmware/modules/source/
  • For 2.6.25 patch cd /usr/lib/vmware/modules/source/ and run./vmware-2.6.25.sh and continue with next step.
  • Run cd /home/vmware/bin;sudo ./vmware-config.pl to compile VMware modules.

Running

It's a possibility the first time you try to run Vmware server it'll throw an error stating something about "Unable to power virtual machine". Stop the VMware server and restart xinetd wtih /etc/rc.d/vmware stop;wait;/etc/rc.d/xinetd restart.

Rerun sudo /home/vmware/bin/vmware-config.pl again. If this still fails, restart your computer and do the above again. It should be fixed.

There is now a vmware init script in /etc/rc.d. You can add this to your daemons list if you want. I personally dont do this, but if you intend to use the vmware's network when not actually using vmware, then you will need to do this. You will need to start it before you can run vmware though.

There is a problem with vmware unable to run correctly after a reboot. To fix this edit /etc/rc.d/vmware, find the text below

case "$1" in
  start)

and put

rm /etc/vmware/not_configured

immediately after that line.

To start vmware, you just do vmware from a console window, or create a shortcut or menu item however you like.

Some notes:

Leave the /etc/rc.d/vmware.d directory there, because it is needed whenever you perform vmware-config.pl.

Remember, if the kernel is changed or updated, you will need to run vmware-config.pl again.

Kernel 2.6 and udev

Follow the steps above and then:

1. Modify udev config

Edit /etc/udev/rules.d/00-myrules.rules and add 2 lines:

# tty devices
KERNEL="tty[[0-9]]*", NAME="vc/%n", SYMLINK="%k"

# floppy devices
KERNEL="fd[[0-9]]*", NAME="floppy/%n" , SYMLINK="fd%n"

2. Start/stop script

It takes care of devices and starts vmware, also stops vmware and removes dev entries. Call it, for example, mkvmdev, chmod it 755 and put in /etc/rc.d:

#!/bin/sh

. /etc/rc.conf
. /etc/rc.d/functions

case "$1" in
    start)
    stat_busy "Creating /dev entries and starting VMware"
    for i in `seq 0 9`; do
        mknod /dev/vmnet$i c 119 $i
        chmod 0600 /dev/vmnet$i
    done
    for i in `seq 0 3`; do
        mknod /dev/parport$i c 99 $i
        chmod 0600 /dev/parport$i
    done
    mknod /dev/vmmon c 10 165
    chmod 0660 /dev/vmmon
    /etc/rc.d/vmware start
    ;;

    stop)
    stat_busy "Stopping VMware and removing /dev entries"
    /etc/rc.d/vmware stop
    rm /dev/vmmon
    for i in `seq 0 3`; do
        rm /dev/parport$i
    done
    for i in `seq 0 9`; do
        rm /dev/vmnet$i
    done
    ;;

    restart)
    $0 stop
    $0 start
    ;;

    *)
    echo "usage: $0 {start|stop|restart}"
esac
exit 0

3. Modify /etc/rc.conf. (*Note - this step is optional! See also the notes under the "Running" section above)

Add mkvmdev to daemons in your rc.conf, and remember to remove vmware from rc.conf. Or if you prefer, you can delete the lines that launch vmware from mkvmdev and leave your original vmware in rc.conf - your choice.


Comments:

hi guys, a couple of quick questions:
- why is /dev/vmmon chmod 0660, as opposed to the rest (0600)?
- i suppose /dev/vmmon should be "rm"-ed as well in the "stop" section for the script above? (that line is missing) - FIXED

Compile Modules Problem

VMware and kernel 2.6.32

To patch VMware modules we have to add #include "compat_sched.h" to some files.

# cd /tmp
# tar xf /usr/lib/vmware/modules/source/vmnet.tar
# nano vmnet-only/vnetUserListener.c (near line 37 add #include "compat_sched.h")
# tar cf /usr/lib/vmware/modules/source/vmnet.tar vmnet-only
# tar xf /usr/lib/vmware/modules/source/vmci.tar
# nano vmci-only/linux/vmciKernelIf.c vmci-only/include/pgtbl.h (add #include "compat_sched.h" around 30 line)
# tar cf /usr/lib/vmware/modules/source/vmci.tar vmci-only
# vmware-modconfig --console --install-all

You can also use ready script http://communities.vmware.com/thread/239221

VMware and kernel 2.6.31

Patch files are at http://communities.vmware.com/message/1305526#1305526

If you have installed previous patches:

# cd /usr/lib/vmware/modules/
# rm -rf source
# mv source-backup source

Next, we need to run downloaded sh file and rebuild kernel modules...

# wget "http://communities.vmware.com/servlet/JiveServlet/download/1305526-25349/vmware-6.5.2-modules-2.6.31-fix.patch"
# wget "http://communities.vmware.com/servlet/JiveServlet/download/1305526-25348/vmware-6.5.2-modules-2.6.31-fix.sh"
# chmod +x vmware-6.5.2-modules-2.6.31-fix.sh
# ./vmware-6.5.2-modules-2.6.31-fix.sh
# vmware-modconfig --console --install-all

VMware and kernel 2.6.30

In Kernel 2.6.30 the modules fail to compile out of the box again. I followed these instructions over here

Download this script and this patch:

# cd /tmp
# wget http://communities.vmware.com/servlet/JiveServlet/download/1314835-25722/vmware-6.5.2-newkernmods.sh
# wget http://communities.vmware.com/servlet/JiveServlet/download/1314438-25709/vmware-6.5.2-newkernmods.patch
# chmod +x vmware-6.5.2-newkernmods.sh
# ./vmware-6.5.2-newkernmods.sh

This will unpack, patch and repack the module sources. Afterwards one can manually trigger to build the modules or just start VMware, which will also build the modules when trying to start a vm.

VMware and kernel 2.6.29

In Kernel 2.6.29 some internal data-structs were changed. Download this patch and apply it to the vmware modules sources as follows:

# cd /usr/lib/vmware/modules/source/
# mkdir orig
# cp *.tar orig/
# for i in *.tar; do tar -xf $i; done
# rm *.tar
# patch -p1 -i /path/to/vmware-workstation-6.5.1.126130-2.6.29_x86_64.patch
# for i in mblock mci mmon mnet mppuser sock; do tar -cf v$i.tar v$i-only; done
# rm -r *-only
Note: Modify /path/to/vmware-workstation-6.5.1.126130-2.6.29_x86_64.patch to match the path to the downloaded patch.
Note: This stuff also works for VMWare Server 2 except that the "block" and "ppuser" modules are not present. Therefore patch complains about some missing files. Just let patch ignore this. Also ignore errors tar might give you if you copy and paste the lines above.
Note: If you're using Workstation 6.5.2, see this thread for the equivalent patch, and a script for applying it.

Afterwards, build the modules manually or just start vmware, as it will start building the modules for you automatically (using the patched sources). For further information read this thread.

VMware and kernel 2.6.28

A tested solution is to fetch the patched modules and replace them. To achieve this, you will need to extract the downloaded archive, and replace both vmmon.tar and vmnet.tar to /usr/lib/vmware/modules/source. After that, run /usr/bin/vmware-config.pl to rebuild the modules.

VMware and kernel 2.6.26

If after compiling the modules following the method for 2.6.25 you receive the "Version mismatch with vmmon module:" error when powering on a virtual machine you will need to take one additional step.

$ cd /usr/lib/vmware/moduels/source/;
$ sudo tar -xvf vmmon.tar;
$ sudo vi vmmon-only/include/iocontrols.h;

Find the line 48:

#define VMMON_VERSION           (161 << 16 | 0)

and change it to:

#define VMMON_VERSION           (167 << 16 | 0)

Save and exit.

$ sudo tar -cf vmmon.tar vmmon-only;

Finally, run vmware-config.pl.

VMware and kernel 2.6.25

There are extra steps required for Vmware WKS 6.0.3 build 80004, should be the same for VMware Server

  1. Install and patch as described (use vmware-any-any-update-116.tgz)
  2. Download the patch117vmware-any-any-update-117-very-ALPHA.tgz
  3. Extract the archive in /usr/lib/vmware/modules/source
  4. Run vmware-2.6.25.sh and then vmware-config.pl

VMware and kernel 2.6.24

May not work properly yet. Apply the patch from http://bio.artcradle.com/temp/vault/vmware-any-any-update-116.tgz (untar, run runme.pl script) Note: this is an ugly hack, please don't put it into production systems. Some guest OS'es may have crashes and networking problems with this. Don't tell us that you haven't been warned

VMware and kernel 2.6.22

May not work properly yet. Apply the patch from http://knihovny.cvut.cz/ftp/pub/vmware/vmware-any-any-update112.tar.gz , replace vmnet.tar with http://npw.net/~phbaer/vmnet.tar and reinstall. Note: this is an ugly hack, please dont put it into production systems. Some guest OS'es may have crashes and networking problems with this. Dont tell us that you havent been warned

VMware and kernel 2.6.20

Below is a solution for compiling the vmware modules on kernel 2.6.20.

$ cd /usr/lib/vmware/modules/source/
$ sudo tar -xvf vmmon.tar
$ cd vmmon-only
$ sudo vi include/compat_kernel.h

Find this:

#define __NR_compat_exit __NR_exit
static inline _syscall1(int, compat_exit, int, exit_code);

and change the static inline ..... line to:

int compat_exit(int exit_code);

Then tar up the vmmon-only directory again:

$ cd .. #go back to the source directory
$ tar -cf vmmon.tar vmmon-only

Finally, run vmware-config.pl

VMware and kernel 2.6.16

PROBLEM: kernel 2.6.16-x - vmware or vmwareplayer complains that headers are incorect.
FIX: You need vmware-any-any-update patch mirror here or here.
Just untar the archive and run ./runme.pl as root - and you're happy again!

Slow networking between host and guest

"Those oversized improperly checksummed packets are TCP Segmentation Offload packets. Use 'ethtool -K eth0 tso off' to disable TSO on eth0 (or any other interface which you want to get bridged). At this moment vmnet does not understand TSO, and in addition to that it is silly to use TSO together with bridged networking as vmnet will have to split such packet anyway to pass it to the guest, so splitting will be done anyway, and in addition to it kernel will have to prepare metadata about TCP stream for hardware, so you'll probably get worse performance with TSO enabled than with disabled when you'll have some guest running."

Note: ethtool is in extra packages.

Samba issues

The guest os under vmware cannot see a samba share running on the linux host. To fix this problem, edit Template:Filename and make some changes under [global]. The following are suggested:

workgroup = YOUR_WORKGROUP
netbios name = YOUR_SERVER_NAME
encrypt passwords = yes
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIVE SO_RCVBUF=8192 SO_SNDBUF=8192
interfaces = eth0 vmnet1 vmnet8
sysv shm key=/dev/vmnet1
bind interfaces only = true

Connecting Remotely

If you setup a server that you would like to connect to remotely, please add the following to Template:Filename:

vmware-authd: ALL

This will enable xinetd to allow connections from a remote vmware client.

If this condition is not met, you may see in your Template:Filename:

Feb  4 03:34:12 jeffc xinetd[7232]: libwrap refused connection to vmware-authd (libwrap=vmware-authd) from 192.168.1.1

Keycode issues

  1. VMware console may mess up your keyboard mapping after VMware tools is installed, effectively making the host desktop unusable until you restart X.
  2. If you have Windows guests, some/most keycodes might not be working within the guest (especially arrow-keys, ctrl, alt, windows-key, etc.).


First solution, by forcing VMware to map keysyms instead of keycodes: Edit or create the file Template:Filename and add the following option:

xkeymap.usekeycodeMap = true

If the first solution still fails to bind certain keys, try the second solution: Edit or create the file Template:Filename and add the following keycode-mappings:

xkeymap.keycode.108 = 0x138 # Alt_R
xkeymap.keycode.106 = 0x135 # KP_Divide
xkeymap.keycode.104 = 0x11c # KP_Enter
xkeymap.keycode.111 = 0x148 # Up
xkeymap.keycode.116 = 0x150 # Down
xkeymap.keycode.113 = 0x14b # Left
xkeymap.keycode.114 = 0x14d # Right
xkeymap.keycode.105 = 0x11d # Control_R
xkeymap.keycode.118 = 0x152 # Insert
xkeymap.keycode.119 = 0x153 # Delete
xkeymap.keycode.110 = 0x147 # Home
xkeymap.keycode.115 = 0x14f # End
xkeymap.keycode.112 = 0x149 # Prior
xkeymap.keycode.117 = 0x151 # Next
xkeymap.keycode.78 = 0x46 # Scroll_Lock
xkeymap.keycode.127 = 0x100 # Pause
xkeymap.keycode.133 = 0x15b # Meta_L
xkeymap.keycode.134 = 0x15c # Meta_R
xkeymap.keycode.135 = 0x15d # Menu

VMware 6.5 Fails to launch vmware-modconfig

If vmware-modconfig crash at the first start, download and run this http://communities.vmware.com/servlet/JiveServlet/download/1088282-15379/vmware-build-modules See more here http://communities.vmware.com/thread/172023

The above script will fail to compile vsock.so. To fix get vmware to work without it just run (as root):

# depmod -a;
# /etc/rc.d/vmware restart