Difference between revisions of "VPN over SSH"

From ArchWiki
Jump to: navigation, search
(Describe PPP over SSH)
(Recommend pvpn for wrapper script)
Line 81: Line 81:
=== Helper script ===
=== Helper script ===
[https://github.com/halhen/dotfiles/blob/master/.bin/ssh-vpn ssh-vpn] is a wrapper script around {{ic|pppd}} over SSH.
[https://github.com/halhen/pvpn pvpn] (available in [https://aur.archlinux.org/packages.php?ID=60740 AUR]) is a wrapper script around {{ic|pppd}} over SSH.
== See also ==
== See also ==

Revision as of 19:41, 13 July 2012

There are several ways to set up a Virtual Private Network through SSH. Note that, while this may be useful from time to time, it may not be a full replacement for a regular VPN. See for example [1].

OpenSSH's built in tunneling

OpenSSH has built-in TUN/TAP support using -w<local-tun-number>:<remote-tun-number>. Here, a layer 3/point-to-point/ TUN tunnel is described. It is also possible to create a layer 2/ethernet/TAP tunnel.

Create tun interfaces

Create tun interfaces:

$ cat /etc/network.d/vpn


Then do 'netcfg -u vpn' or add it into /etc/conf.d/netcfg.

Also You may manage tun interfaces with 'ip tunnel' command.

Creating interfaces in SSH command

SSH can create both interfaces automatically, but you should configure IP and routing after connection established.

ssh \
  -o PermitLocalCommand=yes \
  -o LocalCommand="sudo ifconfig tun5 pointopoint netmask" \
  -o ServerAliveInterval=60 \
  -w 5:5 vpn@example.com \
  'sudo ifconfig tun5 pointopoint netmask; echo tun0 ready'

Start SSH

ssh -f -w5:5 vpn@example.com -i ~/.ssh/key "sleep 1000000000"

or you may add keep-alive options if you are behind a NAT.

ssh -f -w5:5 vpn@example.com \
        -o ServerAliveInterval=30 \
        -o ServerAliveCountMax=5 \
        -o TCPKeepAlive=yes \
        -i ~/.ssh/key "sleep 1000000000"


  • ssh should have access rights to tun interface or permissions to create it. Check owner of tun interface and/or /dev/net/tun.
  • Obviously if you want to access network (not single machine) you should set up properly IP packet forwarding, routing and maybe netfilter on both sides.

Using PPP over SSH

pppd can easily be used to create a tunnel through an SSH server:

/usr/sbin/pppd updetach noauth silent nodeflate pty "/usr/bin/ssh root@remote-gw /usr/sbin/pppd nodetach notty noauth" ipparam vpn

When the VPN is established, you can route traffic through it. To get access to an internal network:

ip route add via

To route all Internet traffic through the tunnel, for example to protect your communication on an unencrypted network, first add a route to the SSH server through your regular gateway:

ip route add <remote-gw> via <current default gateway>

Next, replace the default route with the tunnel

ip route replace default via

Helper script

pvpn (available in AUR) is a wrapper script around pppd over SSH.

See also