Virtual Private Server

From ArchWiki
Revision as of 03:31, 24 January 2014 by Jstjohn (Talk | contribs) (Providers that offer Arch Linux: remove fastdot; Arch is not listed under available operating systems)

Jump to: navigation, search

Template:Article summary start Template:Article summary text Template:Article summary heading Template:Article summary wiki Template:Article summary end From Wikipedia:Virtual private server:

Virtual private server (VPS) is a term used by Internet hosting services to refer to a virtual machine. The term is used for emphasizing that the virtual machine, although running in software on the same physical computer as other customers' virtual machines, is in many respects functionally equivalent to a separate physical computer, is dedicated to the individual customer's needs, has the privacy of a separate physical computer, and can be configured to run server software.

Providers that offer Arch Linux

Warning: We cannot vouch for the honesty or quality of any provider. Please conduct due diligence before ordering.
Note: This list is for providers with a convenient Arch Linux image. Using Arch on other providers is probably possible, but would require loading custom ISOs or disk images or installing under chroot.
Provider Arch Release Virtualization Locations Notes
123 Systems 2010.05.xx OpenVZ Dallas, US-TX Arch available as a selection upon reinstall. Very old (2.6.18-308) kernel - See OpenVZ troubleshooting. Limited information available before purchase. Cannot verify Arch Linux version without purchase.
AUSWEB Latest Only (clarify?) VMware ESXi Sydney, AU Latest ISO (clarify?) of Arch Available. Enterprise Service. 2013.08.01 KVM Auckland, New Zealand (NZ) IRC channel is #affinity on
Afterburst 2012.12.01 OpenVZ Miami, US-FL; Nuremberg, DE Formerly FanaticalVPS, kernel version depends on what node your VPS is on, the ones in Miami are fine (2.6.32-042stab072.10) but some of the ones in Germany require a custom glibc.
BuyVM 2013.07.01 KVM LA, Buffalo NY Must chose a different OS at sign up. Once accessible, choose to mount the latest arch iso and reboot to install manually.
DigitalOcean 2013.05.xx KVM New York, US-NY; San Francisco, US-CA; Amsterdam, AN Uses a custom kernel. You can run your own kernel with a kexec hack. Every server uses SSDs by default.
Edis 2013.03.01 vServer, KVM, OpenVZ Multiple international locations. Also offer dedicated server options as well as an "off-shore" location at the Isle of Man (IM).
DirectVPS 2013.01.xx OpenVZ Amsterdam, AN; Rotterdam, AN Dutch language site. Unable to verify Arch Linux version.
GigaTux 2013.06.01 Xen Chicago, US-IL; Frankfurt, DE; London, GB; San Jose, US-CA
Host Virtual 2011.08.19 KVM Multiple International Locations Appears to use KVM virtualization. Site lists "Xen based virtualization" and features lists ability to install from ISO.
Hostigation 2010.05 i686 OpenVZ, KVM Charlotte, US-NC; Los Angeles, US-CA You can migrate to x86_64.
IntoVPS 2012.09.xx OpenVZ Amsterdam, NA; Bucharest, RO; Dallas, US-TX; Fremont, US-CA; London, GB Blog has not been updated since September, 2012 which included the Arch Linux update.
Leapswitch Networks [2013.10.xx] OpenVZ/KVM USA, India, Portugal, Spain, Ukraine, Germany ArchLinux currently available in Control Panel for reinstall, not on order form. 2013.06.xx OpenVZ Tokyo, JP; Multiple US; London, GB Uses a custom kernel; do not install the linux package.
Lylix 2013.xx.xx Unlisted Unlisted Core2Duo and Woodcrest based processors.
Node Deploy xxxx.xx.xx OpenVZ, KVM Germany (DE); Los Angeles, US-CA; Atlanta, US-GA; Phoenix, US-AZ "At NodeDeploy we support virtually every linux distribution." Arch Linux is listed under their Operating Systems. No version information.
Netcup 2012.11.xx KVM Germany (DE) German language site.
OnePoundWebHosting 2013.05.xx Xen PV, Xen HVM United Kingdom (UK) They are a registrar too. Unable to verify server locations. 2012.12.xx OpenVZ, KVM Germany (DE) German language site.
QuickVZ 2013.10 OpenVZ, Xen Amsterdam, Netherlands (NL); Stockholm, Sweden (SE) Provide hardened Arch Linux images along with Enterprise services (e,g. VPN, Virtual Private LAN Service (VPLS) and Virtual Routers.
Rackspace Cloud 2013.6 Xen Multiple international locations Billed per hour. Use their "next gen" VPSes (using the panel); the Arch image on the first gen Rackspace VPSes is out of date. 2013.05.01 OpenVZ, KVM Los Angeles, US-CA; Great Britain (GB); Atlanta, US-GA; Germany (DE) You can request a newer ISO on RamHost's IRC network.
RamNode 2013.07.01 SSD and SSD Cached: OpenVZ, KVM Seattle, WA USA, Atlanta, GA USA You can request Host/CPU passthrough with KVM service. Customer service has been prompt and professional. Regular discount codes can be found (15-35% off). Modern hardware. Competitive pricing (before discounts).
Tilaa 2013.06.01 KVM Amsterdam, NL English or Dutch language site.
TransIP 2013.05.01 KVM Amsterdam, NL English language site. Registrar.
XenVZ 2009.12.07 OpenVZ, Xen United Kingdom (UK), United States (US) Hardware
Virpus 2013.05.xx OpenVZ, Xen Kansas City, US-KS; Los Angeles, US-CA
Vmline 2013.09.01 KVM, OpenVZ Kraków, PL S-Net reseller. Full virtualization. Polish language site.
VPS6.NET 2013.01.xx  OpenVZ, Xen, HVM-ISO Multiple US; Frankfurt, DE; Bucharest, RO; Istanbul, TR Registrar.



Tango-view-fullscreen.pngThis article or section needs expansion.Tango-view-fullscreen.png

Reason: Are there instructions specific to VPSes? (Discuss in Talk:Virtual Private Server#)

See QEMU#Preparing an (Arch) Linux guest.


Getting a 2010.05 Image Up To Date

These instructions assume you have a 2010.05 image from your VPS provider and you would like to get it updated. The biggest work involves preparing /lib for the symlink upgrade (glibc 2.16, and later filesystem 2013.01).

Warning: If you are on a older kernel than 2.6.32, please refer further down the page to get the glibc-vps repository working (just add the repository and you can follow these steps).

To start, grab the latest BusyBox from This allows you to force glibc (losing /lib temporarily) without losing your OS (BusyBox comes with its own GNU tools which are statically linked).

# wget
# chmod +x busybox-i686

First, you can get a list of packages that own files in /lib with the following command:

$ pacman -Qo /lib/* | cut -d' ' -f 5 | egrep -v 'glibc' | uniq | xargs

For the current 2010.05 that comes from ibiru's page, these are the packages that were required to be removed for me:

pacman -S acl attr util-linux-ng bzip2 libcap e2fsprogs libgcrypt libgpg-error udev readline ncurses pam pcre popt procps readline shadow e2fsprogs sysfsutils udev util-linux-ng sysvinit coreutils

You may have to remove /lib/udev/devices/loop0 (a simple rm works).

After the upgrade finishes, you must remove any extra empty directories in /lib (/lib/modules is the common offender):

# rm -rf /lib/modules

Install tzdata to fix some dependencies, and remove /etc/profile.d/

# pacman -S tzdata
# rm /etc/profile.d/

Remove /var/run (you should have nothing running that matters):

# rm -rf /var/run

Force glibc, which will pull in the latest filesystem package, but will BREAK everything (other than BusyBox):

# pacman -S --force glibc}}

Now, you will have a broken system, so symlink /usr/lib to /lib with BusyBox's ln program:

# ./busybox-i686 ln -s /usr/lib /lib

And you should have a fully functional system where you can now update pacman.

# pacman -S pacman; pacman-key --init; pacman-key --populate archlinux; pacman-db-upgrade; pacman -Syy

Now, update initscripts to get the iproute2 package:

# pacman -S initscripts

Install the makedev package:

pacman -S makedev

Add the following to your /etc/rc.local:

/usr/sbin/MAKEDEV tty
/usr/sbin/MAKEDEV pty

Comment the following lines in /etc/inittab:

#c1:2345:respawn:/sbin/agetty -8 -s 38400 tty1 linux
#c2:2345:respawn:/sbin/agetty -8 -s 38400 tty2 linux
#c3:2345:respawn:/sbin/agetty -8 -s 38400 tty3 linux
#c4:2345:respawn:/sbin/agetty -8 -s 38400 tty4 linux
#c5:2345:respawn:/sbin/agetty -8 -s 38400 tty5 linux
#c6:2345:respawn:/sbin/agetty -8 -s 38400 tty6 linux

Finally, you should be able to upgrade the whole system:

# pacman -Syu

You may run into some issues with krb5 and heimdal, as krb5 no longer provides+conflicts+replaces heimdal ( The old openssh depends on heimdal (and the new openssh depends on krb5), so force install krb5, then upgrade openssh, then remove heimdal and reinstall krb5.

# pacman -S --force krb5
# pacman -S openssh openssl
# pacman -R heimdal
# pacman -S krb5

Fix syslog-ng. Set the src to unix-dgram("/dev/log") and add --no-caps to both check and run args in /etc/conf.d/syslog-ng.

Make sure your /etc/rc.conf is not messed up with broken network definitions, or else be sure serial access works on your VPS before you reboot.

Moving your VPS from network configuration in rc.conf to netcfg (tested with OpenVZ)

1) Install netcfg

pacman -S netcfg

2) Create a netcfg configuration file /etc/network.d/venet

DESCRIPTION='VPS venet connection'
'addr add broadcast dev venet0'
#IPv4 address
'addr add broadcast dev venet0'
#IPv4 route
'route add default dev venet0'
#IPv6 address
'addr add xxxx:xx:xx::x/128 dev venet0'
#IPv6 route
'-6 route add default dev venet0'
DNS=('' '')

3) Edit your netcfg main conf file /etc/conf.d/netcfg


4) Try your new setup

rc.d stop network && ip addr flush venet0 && netcfg venet

Your VPS should still be connected and have its IP addresses set correctly. (Check with ip a)

DO NOT proceed to next step if this isn't the case.

5) Make your new setup survive reboots

In the DAEMONS array in /etc/rc.conf, replace network with net-profiles.

Remove all networking information that is in /etc/rc.conf.


Moving your VPS from initscripts to systemd

Warning: This has been known to work with OpenVZ on the 2.6.32 kernel, but systemd may not work on older kernels.

This is very similar to a regular arch system, except you probably don't have access to your kernel line.

1) Move from network in rc.conf to netcfg (see above).

2) Install systemd

pacman -S systemd

2 bonus for OpenVZ) Remove kernel core dump pattern since this is blocked by OpenVZ and causes errors

Edit /usr/lib/sysctl.d/coredump.conf, comment out the following line:

#kernel.core_pattern=|/usr/lib/systemd/systemd-coredump %p %u %g %s %t %e

3) Move all configuration from /etc/rc.conf (except the DAEMONS array) to its appropriate location.

See Native configuration and rc.conf for details.

Now your /etc/rc.conf should only contain the DAEMONS array.

4) Install systemd-sysvcompat

pacman -S systemd-sysvcompat

It will ask to replace sysvinit, say yes.


5) Move daemons from the DAEMONS array in /etc/rc.conf to systemd

See the guide and the daemons list.

If your DAEMONS array is now empty, skip next step.

6) Moving rc.d daemons with no systemd support, example: vzquota

Create a custom systemd service file for vzquota: /etc/systemd/system/newvzquota.service:

Description=Setup vzquota on VPS

ExecStart=/etc/rc.d/vzquota start
ExecStop=/etc/rc.d/vzquota stop

Note: It is recommended to choose a .service file name that is different from the name of the daemon, because systemd might try to call the LEGACY scripts with the old name.

Enable this service:

systemctl enable newvzquota.service

Remove vzquota from the DAEMONS array in /etc/rc.conf

Repeat this step to remove all daemons from /etc/rc.conf.

7) Removing /etc/rc.local and /etc/rc.local.shutdown

Write custom .service files to replace functionality in /etc/rc.local and /etc/rc.local.shutdown. You can take a look at /usr/lib/systemd/system/rc-local.service and /usr/lib/systemd/system/rc-local-shutdown.service for inspiration.

8) Removing initscripts

Your /etc/rc.conf file must look like this:


and /etc/rc.local and /etc/rc.local.shutdown must now be empty.

Uninstall initscripts

pacman -R initscripts


Tango-view-fullscreen.pngThis article or section needs expansion.Tango-view-fullscreen.png

Reason: Are there instructions specific to VPSes? (Discuss in Talk:Virtual Private Server#)

See Xen#Arch as Xen guest (PVHVM mode) and/or Xen#Arch as Xen guest (PV mode).

Converting OpenStack and Xen components to systemd

There are three components that need to be enabled in systemd when using a VPS based on OpenStack/Xen, such as Rackspace NextGen Cloud. The current version of xe-guest-utilities contains two of these: xe-linux-distribution and xe-daemon.

You will need to create a custom service file for the OpenStack nova-agent, as the current version only comes with a sysvinit start-up script.

Description=nova-agent service

ExecStart=usr/bin/nova-agent -n -l info /usr/share/nova-agent/


Once these steps are done, you can continue with converting the server from sysvinit to systemd.

Make sure to enable the following services:

# systemctl enable xe-linux-distribution
# systemctl enable xe-daemon
# systemctl enable nova-agent


OpenVZ: kernel too old for glibc

Are you on a virtual private server (VPS) with an old kernel & broke your system? Are you using OpenVZ?

Check your kernel version with:

uname -r

If your kernel is older than 2.6.32, you will need a custom version of glibc (because of dependencies in glibc).

Arch Template Used:

Note: For installs that have not been updated to glibc-2.16, it will save you lots of time and prevent major breakage to do:
pacman -U


pacman -U

Add a single -d if needed. The instructions below assume that this has been done.

Following similar instructions from DeveloperWiki:usrlib.

Try doing the following to fix it:

1) Edit /etc/pacman.conf and add the following repository ABOVE [core]:

For 32-bit:

Server =

For 64-bit:

Server =

2) Then run pacman -Syy followed by pacman -Syu. You will be notified to upgrade pacman first.

3) Upgrade the pacman database by running pacman-db-upgrade as root.

4) Edit /etc/pacman.conf.pacnew (new pacman config file) and add the following repository ABOVE [core]:

Server =$arch

5) Replace /etc/pacman.conf with /etc/pacman.conf.pacnew (run as root):

# mv /etc/pacman.conf.pacnew /etc/pacman.conf

6) Upgrade your whole system with new packages again pacman -Syu

If you get the following error or a similar error:

initscripts: /etc/profile.d/ exists in filesystem

Simply delete that file (e.g., rm -f /etc/profile.d/, then run pacman -Syu again.

If you get the following error or a similar error:

filesystem: /etc/mtab exists in filesystem

Run pacman -S filesystem --force

If you get the following error or a similar error:

libusb-compat: /usr/bin/libusb-config exists in filesystem

Run pacman -S libusb and then pacman -S libusb-compat

7) Before rebooting, you need to install the makedev package from the official repositories by running pacman -S makedev.

8) Add MAKEDEV to /etc/rc.local:

/usr/sbin/MAKEDEV tty
/usr/sbin/MAKEDEV pty

9) Edit /etc/inittab, comment out the following lines; otherwise, you will see errors in /var/log/errors.log):

#c1:2345:respawn:/sbin/agetty -8 -s 38400 tty1 linux
#c2:2345:respawn:/sbin/agetty -8 -s 38400 tty2 linux
#c3:2345:respawn:/sbin/agetty -8 -s 38400 tty3 linux
#c4:2345:respawn:/sbin/agetty -8 -s 38400 tty4 linux
#c5:2345:respawn:/sbin/agetty -8 -s 38400 tty5 linux
#c6:2345:respawn:/sbin/agetty -8 -s 38400 tty6 linux

10) To enable use of the hostname command, install the package inetutils from the official repositories.

11) Remove disabling of the SysRq key and setup of core dump pattern because this is blocked by OpenVZ and causes errors.

Because sysctl does not use /etc/sysctl.conf any more[1], you must transfer all settings to /etc/sysctl.d/99-sysctl.conf (or any other file in /etc/sysctl.d/; however, do not transfer the following line:

kernel.sysrq = 0

Edit /usr/lib/sysctl.d/coredump.conf and comment out the following line:

#kernel.core_pattern=|/usr/lib/systemd/systemd-coredump %p %u %g %s %t %e

12) Save and reboot.

Enjoy & thank ioni if you happen to be in #archlinux

SSH fails: PTY allocation request failed on channel 0

Some VPSes have an outdated /etc/rc.sysinit. You may be able to log in via serial console or with the following command:

$ ssh root@broken.server '/bin/bash -i'

Then run the following:

# mv /etc/rc.sysinit.pacnew /etc/rc.sysinit
# reboot

Once it is working, you should be able to comment out the udevd_modprobe line in /etc/rc.sysinit to save a bit of RAM the next time you reboot.

If the above does not work, take a look at this guide.