From ArchWiki
Revision as of 15:48, 4 February 2012 by Radiceta (Talk | contribs)

Jump to: navigation, search

This template has only maintenance purposes. For linking to local translations please use interlanguage links, see Help:i18n#Interlanguage links.

Local languages: Català – Dansk – English – Español – Esperanto – Hrvatski – Indonesia – Italiano – Lietuviškai – Magyar – Nederlands – Norsk Bokmål – Polski – Português – Slovenský – Česky – Ελληνικά – Български – Русский – Српски – Українська – עברית – العربية – ไทย – 日本語 – 正體中文 – 简体中文 – 한국어

External languages (all articles in these languages should be moved to the external wiki): Deutsch – Français – Română – Suomi – Svenska – Tiếng Việt – Türkçe – فارسی

Template:Article summary start

Template:Article summary text Template:Article summary heading Template:Article summary wiki Template:Article summary end

WMFS (Window Manager From Scratch) is a lightweight and highly configurable tiling window manager for X. It can be configured with a configuration file, supports Xft (Freetype) fonts and is compliant with the Extended Window Manager Hints (EWMH) specifications. It is still under heavy development

The code structure of wmfs starts to become too old and is not adapted to the new ideas and concepts of the project anymore. So it has been rewritten (again from scratch). Changes and configuration is described in this wiki.

Rest of this page can be applied only to older version of WMFS.


WMFS is in AUR. Due the high development rate it is recommended to use the git version, wmfs-gitAUR.

WMFS will look for a configuration file in $XDG_CONFIG_HOME/wmfs. To configure WMFS to your liking, you will need to create a configuration file; for most users this will be ~/.config/wmfs/wmfsrc. If ~/.config/wmfs does not exist, create it:

mkdir -p ~/.config/wmfs

A default file is located in your XDG directory, normally in /etc/xdg/wmfs, called wmfsrc. Copy it to your newly created .config/wmfs folder and you can begin to modify it.

cp /etc/xdg/wmfs/wmfsrc ~/.config/wmfs

To use wmfs as a window manager, add it to your .xinitrc:

echo "exec wmfs" >> ~/.xinitrc


Configuration file

The configuration file is well commented. Make small changes cumulatively and reload WMFS (default key to restart is Template:Keypress+Template:Keypress+Template:Keypress) to test them.

By default two different mod keys are used for keybindings (Template:Keypress and Template:Keypress) which may conflict with your existing set-up. These can be changed in wmfsrc. For example, if you want to use the Win-key instead of Alt, replace "Alt" with "Super" or "Mod4" in the configuration file, e.g:

[key] mod = { "Super" } key = "p" func = "launcher" cmd = "launcher_exec" [/key]

Or in a single command

sed --in-place=.bak 's/"Alt"/"Mod4"/' wmfsrc

To bind commands to special symbols you need to specify their name, like "slash" for "/". You can find symbol names by using xev and typing the symbol in question:

xev | grep keycode
   state 0x10, keycode 61 (keysym 0x2f, slash), same_screen YES,
   state 0x10, keycode 60 (keysym 0x2e, period), same_screen YES,
   state 0x10, keycode 59 (keysym 0x2c, comma), same_screen YES,

Tags & Rules

Assigning clients to a tag, eg., having Uzbl open in tag 2, is done through rules. In wmfsrc, write a new rule in the [rules] section:

[rule] instance = "Uzbl" screen = 0  tag = "2"  max =  "false" [/rule]

This will open Uzbl in tag 2 unmaximized. To specify a layout for that tag, under [tags]:

[tag] name = "WWW"  screen = 0 layout = "tile_right" [/tag] 

For some rules, eg., where an application is opened in a terminal, you may need to specify a class as well as an instance:

[rule] instance = "mutt" class = "mutt" screen = 0  tag = "3"  max = "true" [/rule]

Use xprop to determine the values for your rule.

Key Bindings

The [keys] section of wmfsrc allows you to customize your keybindings. As described above, this could mean just changing the default modifier from Template:Keypress to Template:Keypress.

By default, WMFS is set up to cycle through the 9 available layouts. You might, for example, wish to include a keybind to set a specific layout, say tile_right (the classic tiled mode). You could bind that function to Template:Keypress+Template:Keypress like so:

[key] mod = {"Mod4"} key = "t" func = "set_layout" cmd = "tile_right" [/key]

Similarly, you can customize keybinds for any of the other functions. A full list of the functions can be found in /src/config.c - search for "func_name_list_t".


By combining a rule with a keybind, you can create a basic scratchpad - a terminal bound to a keypress that will open in floating mode in any tag in a specific position; for example:

[key] mod = {"Control", "Alt"} key = "p" func = "spawn" cmd = "urxvtc -name scratchpad -geometry 64x10+480+34" [/key]

[rule] instance = "scratchpad"  name  = "scratchpad"   free = "true"  [/rule]

Statusbar configuration

The text shown in the status bars (or infobars) is set on a running wmfs instance using the "wmfs -s" command. You can set a different bar for each screen. The bars can also be positioned at the top or bottom of each tag in the configuration file. For example

wmfs -s "hello world, I am visible on all screens"
wmfs -s 3 "hello world, I am visible on screen 4 only" # screens begin at 0

Colors may be encoded like this:

wmfs -s "This text is \\#ff0000\red, \\#00ff00\green and \\#0000ff\blue"

Rectangles may be drawn like this:

wmfs -s "<--look rectangles \b[700;9;14;5;#00ff00]\ \b[715;4;14;10;#00ff00]\ \b[730;3;14;11;#ff0000]\ "

The format is \b[xx;yy;ww;hh;#cccccc]\ where xx and yy are absolute (not relative) x and y positions, ww and hh are width and height, and cccccc is a color. This feature could be used to create CPU barcharts, volume displays and the like. Note: the absolute positioning makes it difficult to accurately interleave text and graphics.

Images may be added like this:

 wmfs -s "there is sexy image at x;y on this statusbar \i[x;y;height;width;/home/you/img/sexyimg.ext]\ "

(Default image height and width can be set with height = 0 and width = 0 in the sequence.)

Graph may be user like this:

 wmfs -s "graph \g[x;y;width;height;#color;data1;data2;...;datan]\ "

For more info on images and graphs in status bar: http://fu.rootards.org/viewtopic.php?pid=14#p14

To pipe data to the bar, write a bash script with the relevant data you wish to display and source it in your wmfsrc. WMFS will call it at the interval you specify:

status_path = ".config/wmfs/wmfs-status"
status_timing = 5

Note that the output in the status.sh is as explained before.

wmfs -s "What ever you want to be displayed"

Some example status scripts are on the WMFS website.

Note: Currently in Git version the statusbar does not start by itself, you will have to start it by yourself.


You can use Conky to pipe output to the wmfs statusbar with the command:

conky | while read -r; do wmfs -s -name "$REPLY"; done

WMFS Status Toolkit



The keybinding Template:Keypress+Template:Keypress starts a launcher in the titlebar (similar to dmenu). It supports tab-completion and command-line parameters. Multiple presses of the tab key iterate through possible completions.

WMFS can be controlled from the command line with commands such as

wmfs -V :ln

which selects the next layout. Equivalently press Template:Keypress+Template:Keypress followed by ":ln". Type "wmfs -V help" to see the full list.


Status bar not working in last git version

Since some revision, the status_path variable from the misc section is not being used anymore. However, you can exploit the background_command from the root section to start your status.sh script.

background_command = "bash $HOME/.config/wmfs/status.sh"

This solution has some flaws:

  • The script is running independently from WMFS, so it will keep running after WMFS has terminated (which will outputs errors indefinitely in the TTY).
  • Reloading WMFS (Template:Keypress+Template:Keypress+Template:Keypress by default) will launch another process of the script, which will mess everything up.

Assuming your status.sh file is located in the wmfs config folder, you may try to put this command at the very beginning of your script:

kill $(ps U $UID | awk '/wmfs/&&/status.sh/' | grep -vi "$$\|grep\|awk" | awk '{print $1}')

It will prevent it from running multiple times. To stop it once WMFS has terminated, you can use an appropriate loop:

while [ "$(ps U $UID | awk '{print $5}' | grep ^wmfs$)" != "" ] ; do
	wmfs -s "Blah"
	sleep 1