WPA supplicant

From ArchWiki
Revision as of 23:15, 23 August 2013 by Earnest (Talk | contribs) (Maintaining a custom configuration)

Jump to: navigation, search

Template:Article summary start Template:Article summary text Template:Article summary heading Template:Article summary wiki Template:Article summary wiki Template:Article summary end

wpa_supplicant is a cross-platform WPA Supplicant with support for WPA and WPA2 (IEEE 802.11i / RSN (Robust Secure Network)). It is suitable for both desktop/laptop computers and embedded systems. wpa_supplicant is the IEEE 802.1X/WPA component that is used in the client stations. It implements key negotiation with a WPA Authenticator and it controls the roaming and IEEE 802.11 authentication/association of the wlan driver.


Install wpa_supplicant from the official repositories.

Optionally wpa_supplicant_gui can be installed which provides wpa_gui; a graphical frontend for wpa_supplicant using the qt4 toolkit.


wpa_supplicant provides a reference configuration file located at /etc/wpa_supplicant/wpa_supplicant.conf which contains detailed documentation for the all available options and their utilisation.

In its simplest form all the configuration file requires is a network block, for example:


This can easily be generated using the wpa_passphrase tool. For example:

$ wpa_passphrase essid passphrase

Now both wpa_supplicant and wpa_passphrase can be combined to associate with almost all WPA2 (Personal) networks:

# wpa_supplicant -B -i interface -c <(wpa_passphrase essid passphrase)

All that remains is to simply connect using a static IP or DHCP. For example:

# dhcpcd -A interface

Maintaining a custom configuration

Tango-edit-clear.pngThis article or section needs language, wiki syntax or style improvements.Tango-edit-clear.png

Reason: This section is planned to be rewritten with a clearer structure and direction and more attention will be given to maintaining networks and controlling them effectively. (Discuss in Talk:WPA supplicant#)
Note: To discover your network interface name, issue the ip link command.

As discussed above we can make use of wpa_passphrase to generate a basic configuration which we can augment with additional networks and options of our choosing. This may be necessary for more advanced networks employing extensive use of EAP.

Firstly we will use wpa_passphrase to create our basic configuration file.

# wpa_passphrase essid passphrase > /etc/wpa_supplicant/foobar.conf
Tip: Some unusually complex passphrases may require input from a file:
# wpa_passphrase essid < passphrase.txt > /etc/wpa_supplicant/foobar.conf

Next add a ctrl_interface so that we may control the wpa_supplicant daemon. We can allow wpa_cli to edit this configuration by setting update_config=1.

ctrl_interface=DIR=/run/wpa_supplicant GROUP=wheel # allow control for members in the 'wheel' group


Multiple network blocks may be appended to this configuration.

To start your network simply run the following:

# ip link set interface up
# wpa_supplicant -B -D nl80211 -i interface -c /etc/wpa_supplicant/foobar.conf
# dhcpcd -A interface
Note: nl80211 is preferred over the deprecated wext driver. For a list of supported drivers see the output of wpa_supplicant -h.

For networks of varying complexity please study the examples provided in the default /etc/wpa_supplicant/wpa_supplicant.conf file.

Enabling with systemd

In order to enable wireless at boot, enable wpa_supplicant on your particular wireless interface. To get connectivity with DHCP, enable dhcpcd.service as well. Finally, to handle possible ethernet connections, install ifplugd and enable it on your ethernet interface. For instance, the invocations might look like

# systemctl enable wpa_supplicant@wlp3s1
# systemctl enable dhcpcd
# systemctl enable ifplugd@enp5s2

WPA Supplicant handles roaming for all the SSIDs in its configuration file, and ifplugd will configure ethernet and bring down wireless when an ethernet cable is plugged into the machine. dhcpcd takes care of leasing an IP on all interfaces.

It is likely that wpa_supplicant@.service will have to be modified so that it will read the proper configuration file. To override the ExecStart= line, create the following:

ExecStart=/usr/bin/wpa_supplicant -c/etc/wpa_supplicant/bar.conf -i%i

The WantedBy= section in the current version is incorrect. If the line in wpa_supplicant@.service does not match your interface name (wlan0), it will be necessary to copy the service file to /etc/systemd/system and edit it to reflect


The issue is fixed in this commit

Related Links