- 1 Installation
- 2 Configuration
- 2.1 Permanent configuration
- 2.2 Adjusting aspect ratios
- 2.3 Remapping buttons
- 2.4 LEDs
- 2.5 TwinView Setup
- 2.6 Xrandr Setup
- 2.7 Pressure curve
- 3 Application-specific configuration
- 4 Troubleshooting
- 5 See also
Ensure your kernel recognizes your tablet. Connect your tablet via USB or Bluetooth. It should show up in
dmesg | grep -i wacom and be listed in
/proc/bus/input/devices (and if you use USB in the
lsusb output). If it does not, your only chance is that your tablet is supported by a more recent driver than the one in your kernel. In that case install the AUR package.
xsetwacom list devices should now list some devices. If it does not, see #Manual setup.
The KDE graphical user interface for tablet configuration and supports tablet-specific profiles and hotplugging.package provides a
The Xorg driver can be temporarily configured with
xsetwacom, see . Changes are lost after X server restarts or replugging your tablet.
List the available devices:
$ xsetwacom list devices
Wacom Bamboo 16FG 4x5 Finger touch id: 12 type: TOUCH Wacom Bamboo 16FG 4x5 Finger pad id: 13 type: PAD Wacom Bamboo 16FG 4x5 Pen stylus id: 17 type: STYLUS Wacom Bamboo 16FG 4x5 Pen eraser id: 18 type: ERASER
set commands, devices can be specified by name or id. Scripts should use names because ids can change after X server restarts or replugging.
Configuration can be made persistent in xorg.conf, see . Example:
Section "InputClass" Identifier "Wacom Bamboo stylus options" MatchDriver "wacom" MatchProduct "Pen" # Apply custom Options to this device here. EndSection Section "InputClass" Identifier "Wacom eraser options" MatchDriver "wacom" MatchProduct "eraser" # Apply custom Options to this device here. EndSection Section "InputClass" Identifier "Wacom touch options" MatchDriver "wacom" MatchProduct "Finger" # Apply custom Options to this device here. EndSection Section "InputClass" Identifier "Wacom pad options" MatchDriver "wacom" MatchProduct "pad" # Apply custom Options to this device here. EndSection
Identifiers are for human-readable purposes only and printed into the Xorg log, allowing you to determine if your match lines worked.
xsetwacom can try to print all current settings of a device in xorg.conf format with:
$ xsetwacom get device all
Adjusting aspect ratios
Drawing areas of tablets are generally more square than the usual widescreen display with a 16:9 aspect ratio, leading to a slight vertical compression of your input. To resolve such an aspect ratio mismatch you need to compromise by either reducing the drawing area height (called Force Proportions on Windows) or reducing the screen area width. The former wastes drawing area and the latter prevents you from reaching the right edge of your screen with your Stylus. It is probably still a compromise worth to be made because it prevents your strokes from being skewed.
Find out your tablet's resolution by running:
$ xsetwacom get stylus Area
Reducing the drawing area height
$ xsetwacom set stylus Area 0 0 tablet_width height
where height is tablet_width * screen_height / screen_width.
The tablet resolution can be reset back to the default using:
$ xsetwacom set stylus ResetArea
Reducing the screen area width
$ xsetwacom set stylus MapToOutput WIDTHxSCREEN_HEIGHT+0+0
where WIDTH is screen_height * tablet_width / tablet_height.
The X driver lets you remap the buttons on tablets and pens. Buttons are identified by numbers. Tablet buttons start at 1, pen buttons start at 2 (1 is the tip contact event). By default the X driver maps button M to mouse button M. Because X uses buttons 4-7 as the four scrolling directions, physical buttons 4 and higher are mapped to mouse buttons 8 and higher by default. While xorg.conf uses the actual button numbers and only lets you map to mouse buttons, xsetwacom uses the translated mouse button numbers and allows mapping to multiple keycodes (but not keysyms).
If you have not yet remapped your buttons you can easily identify their ids with, by running the following command, placing the mouse cursor on the created window and pressing a button:
$ xev -event button
Outer window is 0x1a00001, inner window is 0x1a00002 ButtonPress event, serial 25, synthetic NO, window 0x1a00001, root 0x2a0, subw 0x0, time 3390669, (404,422), root:(1047,444), state 0x0, button 8, same_screen YES
In this case the button number for xsetwacom is 8 and the actual button number for xorg.conf is 4.
Alternatively, if you want an overview of your tablet's button layout you can look at your tablet's layout SVG. Firstly, find out the filename with a recursive grep search for the tablet name reported by
xsetwacom list devices:
$ grep -rl 'Wacom Bamboo 16FG 4x5' /usr/share/libwacom/*.tablet
In this case the respective layout SVG is
/usr/share/libwacom/layouts/bamboo-16fg-s-t.svg. The letters in the SVG correspond to the button numbers: A=1, B=2, C=3, ...
Because most applications do not let you bind keyboard shortcuts to mouse buttons, you may want to bind your tablet buttons to F13 and higher.
The syntax of
xsetwacom is flexible but not very well documented. The general mapping syntax (extracted from the source code) for xsetwacom 0.17.0 is the following.
KEYWORD [ARGS...] [KEYWORD [ARGS...] ...] KEYWORD + ARGS: key [+,-]KEY [[+,-]KEY ...] where +:key down, -:key up, no prefix:down and up button BUTTON [BUTTON ...] (1=left,2=middle,3=right mouse button, 4/5 scroll mouse wheel) modetoggle toggle absolute/relative tablet mode displaytoggle toggle cursor movement among all displays which include individual screens plus the whole desktop for the selected tool if it is not a pad. When the tool is a pad, the function applies to all tools that are asssociated with the tablet BUTTON: button ID as integer number KEY: MODIFIER, SPECIALKEY or ASCIIKEY MODIFIER: (each can be prefix with an l or an r for the left/right modifier (no prefix = left) ctrl=ctl=control, meta, alt, shift, super, hyper SPECIALKEY: f1-f35, esc=Esc, up,down,left,right, backspace=Backspace, tab, PgUp,PgDn ASCIIKEY: (usual characters the key produces, e.g. a,b,c,1,2,3 etc.)
$ xsetwacom set pad Button 1 3 # right mouse button $ xsetwacom set pad Button 1 "key +ctrl z -ctrl" $ xsetwacom get pad Button 1 key +Control_L +z -z -Control_L $ xsetwacom set pad Button 1 "key +shift button 1 key -shift"
Even little macros are possible:
$ xsetwacom set pad Button 1 "key +shift h -shift e l l o"
xsetwacomcommands from a udev rule, you might find that it will not work, as the Wacom input devices will not be ready at the time. A workaround is to add
sleep 1at the beginning of your script.
Execute custom commands
Mapping custom commands to the buttons is a little bit tricky but actually very simple. First, install xbindkeys.
To get well defined button codes add the following to your permanent configuration file, e.g.
/etc/X11/xorg.conf.d/52-wacom-options.conf in the InputClass section of your pad device. Map the tablet's buttons to some unused button ids.
# Setting up buttons (preferably choose the correct button order, so the topmost key is mapped to 10 and so on) Option "Button1" "10" Option "Button2" "11" Option "Button3" "12" Option "Button4" "13"
Then restart your Xorg server and verify the buttons using
Now set up your xbindkeys configuration, if you do not already have one you might want to create a default configuration
$ xbindkeys --defaults > ~/.xbindkeysrc
Then add your custom key mapping to
~/.xbindkeysrc, for example
"firefox" m:0x10 + b:10 (mouse) "xterm" m:0x10 + b:11 (mouse) "xdotool key ctrl-z" m:0x10 + b:12 (mouse) "send-notify Test "No need for escaping the quotes"" m:0x10 + b:13 (mouse)
# Give the users group permissions to set Wacom device LEDs. ACTION=="add", SUBSYSTEM=="hid", DRIVERS=="wacom", RUN+="/usr/bin/sh -c 'chown :users /sys/%p/wacom_led/*'"
Setting the Intuos OLEDs can be done usingAUR from the AUR.
If you are going to use two Monitors the aspect ratio while using the Tablet might feel unnatural. In order to fix this you need to add
Option "TwinView" "horizontal"
To all of your Wacom-InputDevice entries in the
xorg.conf file. You may read more about that HERE
Temporary TwinView Setup
For temporary mapping of a Wacom device to a single display while preserving the aspect ratio, this script may be used. This will letter-box the surface area of the device as required to ensure the input is not stretched on the display. This script may be executed in your
.xinitrc file for it to automatically run.
xrandr sets two monitors as one big screen, mapping the tablet to the whole virtual screen and deforming aspect ratio. For a solution see this thread: archlinux forum.
If you just want to map the tablet to one of your screens, first find out what the screens are called:
$ xrandr Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 16384 x 16384 HDMI-0 disconnected (normal left inverted right x axis y axis) DVI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 1680x1050 60.0 ... VGA-0 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 1680x1050 60.0 ...
Then you need to know what is the ID of your tablet.
$ xsetwacom list devices WALTOP International Corp. Slim Tablet stylus id: 12 type: STYLUS
In my case I want to map the tablet (ID: 12) to the screen on the right, which is VGA-0. I can do that with this command
$ xsetwacom set 12 MapToOutput "VGA-0"
This should immediately work, no root necessary.
Should this fail when using the nvidia binary driver, using HEAD-0, HEAD-1 and so on to refer to the monitors may work.
If xsetwacom replies with "Unable to find an output ..." an X11 geometry string of the form WIDTHxHEIGHT+X+Y can be specified instead of the screen identifier. In this example
$ xsetwacom set 12 MapToOutput "1920x1080+1920+0"
should also map the tablet to the screen on the right.
Alternatively, you can use this bash script to quickly map the tablet to one of your screens (or the entire desktop) and fix the aspect ratio.
In case xsetwacom doesn't work, you can try xinput.
First, you need to find your tablet's ID.
$ xinput list
In my case, the output is:
⎡ Virtual core pointer id=2 [master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)] ⎜ ↳ Wacom Intuos PT S 2 Finger id=11 [slave pointer (2)] ⎜ ↳ Wacom Intuos PT S 2 Pad id=12 [slave pointer (2)] ⎜ ↳ USB Keyboard id=14 [slave pointer (2)] ⎜ ↳ SynPS/2 Synaptics TouchPad id=16 [slave pointer (2)] ⎜ ↳ TPPS/2 IBM TrackPoint id=17 [slave pointer (2)] ⎜ ↳ SteelSeries Kinzu V2 Gaming Mouse id=9 [slave pointer (2)] ⎜ ↳ Wacom Intuos PT S 2 Pen Pen (0x6281780c) id=20 [slave pointer (2)] ⎣ Virtual core keyboard id=3 [master keyboard (2)] ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)] ↳ Power Button id=6 [slave keyboard (3)] ↳ Video Bus id=7 [slave keyboard (3)] ↳ Sleep Button id=8 [slave keyboard (3)] ↳ Wacom Intuos PT S 2 Pen id=10 [slave keyboard (3)] ↳ USB Keyboard id=13 [slave keyboard (3)] ↳ AT Translated Set 2 keyboard id=15 [slave keyboard (3)] ↳ ThinkPad Extra Buttons id=18 [slave keyboard (3)] ↳ USB Keyboard id=19 [slave keyboard (3)]
This mean, my tablet's ID is 20. Now we map it with VGA-0 screen:
$ xinput map-to-output 20 VGA-0
Use the Wacom Pressure Curve and Threshold Graph to find P1=red (eg. 50,0) and P2=purple (eg. 100,80) of your desired curve. The x-axis is the input pressure you apply to the pen; the y-axis is the output pressure the application is given.
You can change the pressure curve with:
$ xsetwacom set stylus PressureCurve x1 y1 x2 y2
To enable pad buttons and extra pen buttons in Blender, you can create a xsetwacom wrapper to temporarily remap buttons for your blender session.
- Left tablet buttons to Shift and Control (pan/tilt/zoom/smooth/invert)
- Right tablet buttons to F (brush size/strenght) and Control-z (undo)
- Top pen button ton m (mask control)
To enable proper usage, and pressure sensitive painting in GIMP, just go to Edit > Input Devices. Now for each of your eraser, stylus, and cursor devices, set the mode to Screen, and remember to save.
- Please take note that if present, the pad device should be kept disabled as I do not think GIMP supports such things. Alternatively, to use such features of your tablet you should map them to keyboard commands with a program such as Wacom ExpressKeys.
- You should also take note that the tool selected for the stylus is independent to that of the eraser. This can actually be quite handy, as you can have the eraser set to be used as any tool you like.
For more information checkout the Setting up GIMP section of GIMP Talk - Community - Install Guide: Getting Wacom Drawing Tablets To Work In Gimp.
If the above was not enough, you may want to try setting up the tablet's stylus (and eraser) as a second mouse pointer (separating it from your mouse) by using the
xinput create-master and
xinput reattach commands. It can help when GIMP does not start painting even if the stylus touches the tablet.
Pressure sensitivity in Inkscape is enabled the same way as in GIMP. Go to Edit > Input Devices.... Now for each of your eraser, stylus, and cursor devices, set the mode to Screen, and remember to save.
If your tablet does not draw in Krita (clicks/pressure are not registered) but works in the brush selection dialog which has a small test area, try putting Krita in full-screen or canvas-only mode.
Krita only requires that Qt is able to use your tablet to function properly. If your tablet is not working in Krita, then make sure to check it is working in Qt first. The effect of tablet pressure can then be tweaked in the painttop configuration, for example by selecting opacity, then selecting pressure from the drop down and adjusting the curve to your preference.
First, make sure that your tablet works well under Arch. Then, download and install the last driver from Wacom website on the guest OS. Shutdown the virtual machine, go to Settings > USB. Select Add Filter From Device and select your tablet (e.g. WACOM CTE-440-U V4.0-3 ). Select Edit Filter, and change the last item Remote to Any.
Newer tablets' drivers might not be in the kernel yet, and additional manipulations might be needed. A notable example is the newer Intuos line of tablets (Draw/Comic/Photo).
If your tablet does not get recognized by
dmesg complains about an unknown device_type, then you need to install a patched version of input-wacom.
Download and install the for-4.4 branch from SourceForge. Your device should be recognized after you run
# rmmod wacom # insmod /lib/modules/YOUR_KERNEL/kernel/drivers/hid/wacom.ko.gz
Tablet recognized but xsetwacom and similar tools do not display it
Your logs indicate that the correct driver is selected, and the tablet works. However, when running
xsetwacom list devices or use similar tools that depend on the correct driver, you get an empty list.
A reason might be the execution order of your xorg configuration.
/usr/share/X11/xorg.conf.d gets executed first, then
/etc/X11/xorg.conf.d. The package contains the file
/usr/share/X11/xorg.conf.d/70-wacom.conf. If there is a catchall for tablets, executed after this file, the previously selected
wacom driver will be overwritten with a generic one that does not work with xsetwacom et. al.
To make sure, check the rules contained in the files executed after
/usr/share/X11/xorg.conf.d/70-wacom.conf for anything that looks like graphics tablets.
A manual configuration is done in
/etc/X11/xorg.conf or in a separate file in the
/etc/X11/xorg.conf.d/ directory. The Wacom tablet device is accessed using a input event interface in
/dev/input/ which is provided by the kernel driver. The interface number
event?? is likely to change when unplugging and replugging into the same or especially a different USB port. Therefore it is wise to not refer to the device using its concrete
event?? interface (static configuration) but by letting udev dynamically create a symbolic link to the correct
event file (dynamic configuration).
Dynamic with udev
xorg.confconfiguration if you are using the wacom-udev package from AUR.
After (re-)plugging in your USB-tablet (or at least after rebooting) some symbolic links should appear in
/dev/input referring to your tablet device.
$ ls /dev/input/wacom* /dev/input/wacom /dev/input/wacom-stylus /dev/input/wacom-touch
If not, your device is likely to be not yet included in the udev configuration from wacom-udev which resides in
/usr/lib/udev/rules.d/10-wacom.rules. It is a good idea to copy the file e.g. to
10-my-wacom.rules before modifying it, else it might be reverted by a package upgrade.
Add your device to the file by duplicating some line of another device and adapting idVendor,idProduct and the symlink name to your device. The two id's can be determined using
$ lsusb | grep -i wacom Bus 002 Device 007: ID 056a:0062 Wacom Co., Ltd
In this example idVendor is 056a and idProduct 0062. In case you have device with touch (e.g. Bamboo Pen&Touch) you might need to add a second line for the touch input interface. For details check the linuxwacom wiki Fixed device files with udev.
Save the file and reload udev's configuration profile using the command udevadm control --reload-rules Check again the content of /dev/input to make sure that the wacom symlinks appeared. Note that you may need to plug-in the tablet again for the device to appear.
The files of further interest for the Xorg configuration are
/dev/input/wacom and for a touch-device also
The broken link: archived in aur-mirror] should also include support for serial devices. Users of serial tablets might be also interested in the inputattach tool from package. The inputattach command allows to bind serial device into /dev/input tree, for example with:AUR[
# inputattach --w8001 /dev/ttyS0
See man inputattach for help about available options. As for USB devices one should end up with a file
/dev/input/wacom and proceed with the Xorg configuration.
Usually it is recommended to rely on Xorg's auto-detection or to use a dynamic setup. However for an internal tablet device one might consider a static Xorg setup in case autodetection does not work. A static Xorg setup is usually not able to recognize your Wacom tablet when it is connected to a different USB port or even after unplugging and replugging it into the same port, and as such it should be considered as deprecated.
If you insist in using a static setup just refer to your tablet in the Xorg configuration in the next section using the correct
/dev/input/event?? files as one can find out by looking into
In either case, dynamic or static setup you got now one or two files in
/dev/input/ which refer to the correct input event devices of your tablet. All that is left to do is add the relevant information to
/etc/X11/xorg.conf, or a dedicated file under
/etc/X11/xorg.conf.d/. The exact configuration depends on your tablet's features of course.
xsetwacom list devices might give helpful information on what InputDevice sections are needed for your tablet.
An example configuration for a Volito2 might look like this
Section "InputDevice" Driver "wacom" Identifier "stylus" Option "Device" "/dev/input/wacom" # or the corresponding event?? for a static setup Option "Type" "stylus" Option "USB" "on" # USB ONLY Option "Mode" "Relative" # other option: "Absolute" Option "Vendor" "WACOM" Option "tilt" "on" # add this if your tablet supports tilt Option "Threshold" "5" # the official linuxwacom howto advises this line EndSection Section "InputDevice" Driver "wacom" Identifier "eraser" Option "Device" "/dev/input/wacom" # or the corresponding event?? for a static setup Option "Type" "eraser" Option "USB" "on" # USB ONLY Option "Mode" "Relative" # other option: "Absolute" Option "Vendor" "WACOM" Option "tilt" "on" # add this if your tablet supports tilt Option "Threshold" "5" # the official linuxwacom howto advises this line EndSection Section "InputDevice" Driver "wacom" Identifier "cursor" Option "Device" "/dev/input/wacom" # or the corresponding event?? for a static setup Option "Type" "cursor" Option "USB" "on" # USB ONLY Option "Mode" "Relative" # other option: "Absolute" Option "Vendor" "WACOM" EndSection
Make sure that you also change the path (
"Device") to your mouse, as it will be
Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mouse_udev" Option "SendCoreEvents" "true" Option "Protocol" "IMPS/2" Option "ZAxisMapping" "4 5" Option "Buttons" "5" EndSection
Add this to the ServerLayout section
InputDevice "cursor" "SendCoreEvents" InputDevice "stylus" "SendCoreEvents" InputDevice "eraser" "SendCoreEvents"
And finally make sure to update the identifier of your mouse in the ServerLayout section – as mine went from
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse1" "CorePointer"