Difference between revisions of "WeTab"

From ArchWiki
Jump to: navigation, search
(HDMI: Use AUR template)
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
[[Category:Other hardware]]
 
[[Category:Other hardware]]
{{i18n|WeTab}}
 
 
{{Stub}}
 
{{Stub}}
  
Line 6: Line 5:
  
 
==BIOS Update==
 
==BIOS Update==
{{Box RED | This part is incomplete and you might have to do your own research about it. Nobody can guarantee that you can't make your WeTab unusuable (brick)|}}
+
{{Warning|This part is incomplete and you might have to do your own research about it. Nobody can guarantee that you can't make your WeTab unusuable (brick)}}
  
 
Download the Bios-Update-Stick-V2.zip from [http://www.pherzog.net/WeTab.das-neue-BIOS-fur-das-WeTab.ashx pherzog's website] and apply the {{ic|.img}} file inside the zip with dd to a USB Stick like that:
 
Download the Bios-Update-Stick-V2.zip from [http://www.pherzog.net/WeTab.das-neue-BIOS-fur-das-WeTab.ashx pherzog's website] and apply the {{ic|.img}} file inside the zip with dd to a USB Stick like that:
Line 26: Line 25:
 
There's a very hacky solution for getting the HDMI-slot to work in Archlinux.
 
There's a very hacky solution for getting the HDMI-slot to work in Archlinux.
  
You first have to install [https://aur.archlinux.org/packages.php?ID=55619 chrontel-wetab-rpm from the AUR].
+
You first have to install {{AUR|chrontel-wetab-rpm}} from [[AUR]].
  
 
Then execute the following commands as root:
 
Then execute the following commands as root:
Line 34: Line 33:
 
  tiitoo-hdmi-daemon
 
  tiitoo-hdmi-daemon
  
{{Box RED | Note: |if mv tells you that i2c-0 doesn't exist, try i2c-14 instead. It depends on the kernel.}}
+
{{Note|if mv tells you that i2c-0 doesn't exist, try i2c-14 instead. It depends on the kernel.}}
  
 
* When you see something on the screen you've plugged on the HDMI-port, you can kill the {{ic|tiitoo-hdmi-daemon}}. But you don't have to.
 
* When you see something on the screen you've plugged on the HDMI-port, you can kill the {{ic|tiitoo-hdmi-daemon}}. But you don't have to.

Revision as of 09:36, 17 April 2013

Tango-document-new.pngThis article is a stub.Tango-document-new.png

Notes: please use the first argument of the template to provide more detailed indications. (Discuss in Talk:WeTab#)

The WeTab is a tablet-PC by 4tiitoo and Neofonie.

BIOS Update

Warning: This part is incomplete and you might have to do your own research about it. Nobody can guarantee that you can't make your WeTab unusuable (brick)

Download the Bios-Update-Stick-V2.zip from pherzog's website and apply the .img file inside the zip with dd to a USB Stick like that:

dd if=./Bios-Update-Stick-V2.img of=/dev/sdx

The text file in the zip describes how to boot the USB Stick, this one is a non-literal translation:

  • Have the WeTab turned on. Also, have the WeTab connected with the charger, the USB Stick and a Keyboard.
  • Turn it off while holding down the "Hotkey" (Upper-left, that touch-sensitive circle)
  • It should reboot after approximately five seconds.
  • Hold down the "Hotkey" and smash on F11 like it's the last thing you could do before death.
  • Select the USB Stick as boot device, follow your common sense from now on.

Drivers

HDMI

There's a very hacky solution for getting the HDMI-slot to work in Archlinux.

You first have to install chrontel-wetab-rpmAUR from AUR.

Then execute the following commands as root:

modprobe i2c-dev
mv /dev/i2c-0 /dev/i2c-2
tiitoo-hdmi-daemon
Note: if mv tells you that i2c-0 doesn't exist, try i2c-14 instead. It depends on the kernel.
  • When you see something on the screen you've plugged on the HDMI-port, you can kill the tiitoo-hdmi-daemon. But you don't have to.
  • These commands have to be executed on every booting process.
  • The graphics card in the WeTab is only capable of cloning the output of the internal screen to the HDMI-port, with the same resolution. Because of that, the driver doesn't need a running Xorg to function properly.