Wvdial

From ArchWiki
Revision as of 19:53, 2 September 2011 by Sa1 (Talk | contribs) (Using wvdial: Spelling mistakes)

Jump to: navigation, search

This template has only maintenance purposes. For linking to local translations please use interlanguage links, see Help:i18n#Interlanguage links.


Local languages: Català – Dansk – English – Español – Esperanto – Hrvatski – Indonesia – Italiano – Lietuviškai – Magyar – Nederlands – Norsk Bokmål – Polski – Português – Slovenský – Česky – Ελληνικά – Български – Русский – Српски – Українська – עברית – العربية – ไทย – 日本語 – 正體中文 – 简体中文 – 한국어


External languages (all articles in these languages should be moved to the external wiki): Deutsch – Français – Română – Suomi – Svenska – Tiếng Việt – Türkçe – فارسی

WvDial is a Point-to-Point Protocol dialer: it dials a modem and starts pppd in order to connect to the Internet.

Configuration

When WvDial starts, it first loads its configuration from Template:Filename and Template:Filename . If Template:Filename is not present, the easiest way to create it is to use the provided configuration utility wvdialconf.

wvdialconf /etc/wvdial.conf

It helps in generating the configuration file needed by WvDial. wvdialconf detects your modem, and fills in automatically the Modem, maximum Baud rate, and a good initialization string (Init options) and generates or updates the WvDial configuration file (Template:Filename) based on this information.

It is safe to run wvdialconf if a configuration file already exists. In that case, only the Modem, Baud, Init, and Init2 options are changed in the [Dialer Defaults] section, and only if autodetection is successful.

Note: Wvdialconf does not automatically fill in your login information. You need to edit Template:Filename and specify the phone number, login name, and password of your internet account in order for WvDial to work.

After you have filled in your login information, wvdial ought to work. You can move to the next section. However for providers of USB modems that require a specific Init string and user/password combination, mkwvconf-git in AUR can help generate a wvdial configuration (based on the mobile-broadband-provider-info-git package).

A typical Template:Filename looks like this after manual configuration:

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
ISDN = 0
Modem = /dev/ttyUSB2
Baud = 9600

[Dialer thenet]
Phone = *99***1#
Username = thenetuser
Password = thenetpw
Stupid Mode = 1
Baud = 460800
Init3 = AT+CGDCONT=1,"IP","apn.thenet.net"

[Dialer mypin]
Init4 = AT+CPIN=1234

Using wvdial

There are a few different ways of giving regular users the ability to use wvdial to dial a ppp connection. This document describes three different ways, each of them differ in difficulty to set up and the implication on security.

wvdial is to be run as root with the following command:

# wvdial <section>

Leave <section> blank if you have not added a section or if Template:Filename is auto-generated.

# wvdial

Using suid

This is arguable the easiest setup but has major impact on system security since it means that every user can run wvdial as root. Please consider using one of the other solutions instead.

As normal users cannot use wvdial to dial a ppp connection by default, change permissions:

# chmod u+s /usr/bin/wvdial

You should see the following permissions:

# ls -l /usr/bin/wvdial
-rwsr-xr-x  1 root root 114368 2005-12-07 19:21 /usr/bin/wvdial

Using a dialout group

Another, slightly more secure way is to set up a group called dialout (call the group as prefered) and give members of this group permission to run Template:Codeline as root.

First create the group and add the users to it:

# groupadd dialout
# gpasswd -a username dialout
Note: You need to logout and log back in for the current user's group list to be updated.

Then set the group and adjust the permissions on Template:Codeline:

# chgrp dialout /usr/bin/wvdial
# chmod u+s,o= /usr/bin/wvdial

The files should have the following permissions: Template:Command

Using sudo

See main article: sudo

sudo arguably offers the most secure option to allow regular users to establish dial-up connections using Template:Codeline. It can be used to give permission both on a per-user and group basis. Another benefit of using Template:Codeline is that it is only needed to do the setup once; both previous solutions will be "undone" when a new package of Template:Codeline is installed.

Use Template:Codeline to edit the file Template:Filename:

# visudo

To give a specific user permission to run Template:Codeline as root, add the following line (changing the username):

username localhost = /usr/bin/wvdial

To give all members of a group (Template:Codeline in this case) the same permission:

%dialout localhost = /usr/bin/wvdial

If Template:Codeline shows a pppd entry, it means that the session is ready.

Tips and Tricks

The following are applicable to USB modems.

Low connection speed

Someone claims that the connection speed under linux is lower than Windows. https://bbs.archlinux.org/viewtopic.php?id=111513

A short summary for possible solutions which are not fully verified. In most of conditions, the low speed is caused by bad receiver signals and too many people in cell. But you still could use the following method to try to improve the connection speed.

QoS parameter

AT+CGEQMIN and AT+CGEQREQ command could used to set the Qos command. And also it should be possible to used to decrease and limit the connect speed. Add the following Init command in Template:Filename.

Init6 = AT+CGEQMIN=1,4,64,640,64,640
Init7 = AT+CGEQREQ=1,4,64,640,64,640

Baud parameter

Baud parameter in Template:Filename could be used to increase the connection speed.

Baud = 460800

It is advisable to see the baud rate set by the official modem application under Windows.